ASTM D 8038 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material
Hardcopy , PDF
28-06-2022
English
23-12-2016
CONTAINED IN VOL. 04.09, 2016 Defines selected aspects for reclamation of recycled aggregate base (RAB) material derived from asphalt pavement or concrete.
Committee |
D 18
|
DocumentType |
Standard Practice
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1 This practice covers selected aspects for reclamation of recycled aggregate base (RAB) material derived from asphalt pavement or concrete. RAB may be called recycled asphalt pavement (RAP) or recycled concrete aggregate (RCA).
1.2This practice is provided related to material quality, material quality control testing, and also operator and facility qualifications.
1.3Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.
Note 1:Sieve size is identified by its standard designation in Specification E11. The alternative designation given in parentheses is for information only and does not represent a different standard sieve size.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title means only that the document has been approved through the ASTM consensus process.
ASTM D 6928 : 2008 : EDT 1 | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 6307 : 2019 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 653 : 2007 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM D 6928 : 2008 | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 6307 : 2004 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 2940 : 2003 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
ASTM D 6928 : 2006 | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM C 535 : 2016 : REDLINE | Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
ASTM D 6928 : 2017 | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 8 : 2022 : REV A | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM D 6928 : 2010 | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 6307 : 1998 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 2940 : 1998 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
ASTM C 702 : 1998 | Standard Practice for Reducing Samples of Aggregate to Testing Size |
ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 8 : 2022 | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM D 653 : 2020 : EDT 1 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM D 653 : 2021 : REV A | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM D 8 : 2021 | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM D 653 : 2021 | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM D 653 : 2021 : REV B | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 6928 : 2017 : REDLINE | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 8 : 2019 | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
ASTM C 136 : 1996 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM D 6307 : 2010 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 6307 : 2005 : R2010 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 8 : 2020 : REV A | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM D 6928 : 2003 | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 6307 : 2005 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 6307 : 2016 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.