ASTM D 828 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
Available format(s)
Hardcopy , PDF
Superseded date
05-12-2016
Superseded by
Language(s)
English
Published date
01-11-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.09, 2016 Defines procedures for determining tensile properties of paper and paperboard.
| Committee |
D 09
|
| DocumentType |
Test Method
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers procedures for determining tensile properties of paper and paperboard.
1.2The procedures given in this test method are for use with constant-rate-of-elongation tensile testing equipment and as such, are able to be used with instruments designed for either vertical or horizontal operation, and whether manually operated or computer controlled.
1.3These procedures are applicable for all types of paper, paperboard, paper products, and related materials within the measurement limitations of the equipment used. They are not for use with combined corrugated board.
1.4Properties able to be determined using this test method include tensile strength, stretch, tensile energy absorption, tensile stiffness, breaking length, and tensile index.
1.5The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 5749 : 2017 : REDLINE | Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing |
| MIL-C-0051096 Revision E:1983 | CORE MATERIAL, C18 |
| ASTM D 3759/D3759M : 2005 | Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes |
| MIL-B-51097 Revision B:1964 | BACKING MATERIAL, C18 |
| MIL-B-0051097 Revision D:1976 | BACKING MATERIAL, C18 |
| ASTM D 5282 : 2005 | Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation |
| ASTM D 4987 : 1999 : R2008 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper (Withdrawn 2010) |
| ASTM D 776 : 1992 : R1996 | Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board |
| ASTM E 2556/E2556M : 2010 : R2016 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment |
| ASTM D 6819 : 2002 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| ASTM D 619 : 2014 | Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM D 5282 : 2005 : R2012 | Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation |
| MIL-I-24683 Revision A:1990 | INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
| DOD I 24683 : 1987 | INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
| ASTM D 5802 : 1995 | Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) |
| ASTM D 1677 : 2017 : REDLINE | Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation |
| ASTM B 900 : 2016 : REDLINE | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
| ASTM D 528 : 1997 | Standard Test Method for Machine Direction of Paper and Paperboard |
| CSA A220 SERIES : 2006 : INC : UPD 4 : 2010 : R2012 | CONCRETE ROOF TILES |
| CSA A220 SERIES : 2006 : INC : UPD 4 : 2010 | CONCRETE ROOF TILES |
| ASTM D 146 : 2004 | Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing |
| ASTM D 2020 : 1992 : R2003 | Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard (Withdrawn 2009) |
| ASTM D 3022 : 1984 : R1996 : EDT 1 | Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
| ASTM D 1458 : 2013-12 | TEST METHODS FOR FULLY CURED SILICONE RUBBER-COATED GLASS FABRIC AND TAPES FOR ELECTRICAL INSULATION |
| ASTM D 2020 : 1992 : R1999 | Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard |
| ASTM D 6819 : 2002 : EDT 1 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| ASTM D 902 : 2012 : REDLINE | Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
| ASTM D 4987 : 1999 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
| ASTM D 6819 : 2002 : EDT 3 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| TAPPI T 404 : 1992 | TENSILE BREAKING STRENGTH AND ELONGATION OF PAPER AND PAPERBOARD (USING PENDULUM-TYPE TESTER) |
| ASTM D 4369 : 1992 | Specification for Boxed Facial Tissue for Industrial and Institutional Use (Withdrawn 1999) |
| MIL F 62309 : B | FILTER ELEMENT, AIR |
| ASTM D 6819 : 2002 : R2007 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus (Withdrawn 2011) |
| CCC-W-51 Revision D:1975 | WADDING, COTTON, SURGICAL |
| ASTM E 1993 : 1998 : R2002 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| MIL-F-51481 Base Document:1981 | FILTER MATERIAL, LAMINATED PAPER, TEN-PLY |
| ASTM C 921 : 2010 | Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation |
| ASTM D 3905 : 1993 | Standard Specification for Toilet Tissue for Industrial and Institutional Use (Withdrawn 2000) |
| ASTM C 921 : 2010 : R2015 | Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021) |
| ASTM E 1993/E1993M : 1998 : R2013 : EDT 1 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 154/E154M : 2008 : REV A : R2013 : EDT 1 | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
| ASTM E 2556/E2556M : 2010 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment |
| ASTM D 4560 : 1992 | Specification for Paper Napkins for Industrial and Institutional Use (Withdrawn 1999) |
| MIL-B-20467 Revision A:1974 | BOXBOARD (FOR USE IN AMMUNITION) |
| ASTM D 528 : 1997 : R2007 | Standard Test Method for Machine Direction of Paper and Paperboard (Withdrawn 2010) |
| MIL-F-51095 Revision B:1964 | FILTER MATERIAL, GAS AEROSOL, C18R1 |
| P-D-455 Revision D:1975 | DISKS, ABRASIVE, ALUMINUM OXIDE |
| ASTM D 6819 : 2002 : EDT 2 | Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus |
| HH-B-100 Revision B:1973 | BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION) |
| ASTM E 1993 : 1998 : R2002 : EDT 1 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM D 4431 : 1992 | Standard Specification for Paper Towels for Industrial and Institutional Use (Withdrawn 2000) |
| MIL-S-28600 Revision A:1976 | SORBENTS, FLOATING (FOR OIL SPILL REMOVAL) |
| ASTM D 4987 : 1999 : R2003 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
| CSA A220 SERIES : 2006 | CONCRETE ROOF TILES |
| ASTM D 5802 : 1995 : R2001 | Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) (Withdrawn 2009) |
| MIL-F-0051095 Revision F:1983 | FILTER MATERIAL, GAS-AEROSOL, C18R1 2 |
| A-A-1016 Revision C:1991 | DISC, ABRASIVE (CLOTH AND FIBER) |
| ASTM D 3759/D3759M : 2005 : R2011 | Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape |
| ASTM D 528 : 1997 : R2002 | Standard Test Method for Machine Direction of Paper and Paperboard |
| CSA A220 SERIES : 2006 : R2016 | CONCRETE ROOF TILES |
| ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| ASTM E 1993 : 1998 : R2008 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM C 1423 : 2016 : REDLINE | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| TAPPI T 561 : 0 | SORPTIVE RATE AND CAPACITY OF BIBULOUS PAPER PRODUCTS USING GRAVIMETRIC PRINCIPLES |
| ASTM D 1968 : 2015 | Standard Terminology Relating to Paper and Paper Products |
| ASTM E 1993 : 1998 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM D 776 : 1992 : R2001 | Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board (Withdrawn 2009) |
| ASTM E 1745 : 2017 : REDLINE | Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
| ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM D 585 : 1997 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| ASTM D 685 : 2017 : REDLINE | Standard Practice for Conditioning Paper and Paper Products for Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.