ASTM D 892 : 2013-07
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS
Published date
01-07-2013
Superseded date
11-06-2018
Sorry this product is not available in your region.
CONTAINED IN VOL. 05.01, 2018 Gives the determination of the foaming characteristics of lubricating oils at 24 degree C and 93.5 degree C.
| Committee |
D 02
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| MIL-PRF-17331 Revision K:2013 | Lubricating Oil, Steam Turbine and Gear, Moderate Service |
| MIL-L-46152 Revision E:1990 | Lubricating Oil, Internal Combustion Engine, Administrative Service (S/S by A-A-52039) |
| BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
| DOD L 24574 : (1) | LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES |
| MIL L 83767 : B | LUBRICATING OIL, VACUUM PUMP, MECHANICAL |
| 11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| DEFSTAN 91-71/2(2001) : 2001 | LUBRICATING OIL, GEAR SYNTHETIC JOINT SERVICE DESIGNATION: OX-165 |
| MIL H 87257 : 0 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT & MISSILE |
| MIL PRF 009000 : K | LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH-OUTPUT DIESEL |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
| MIL L 9000 : H | LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL |
| BS 2000-604(2012) : 2012 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS - DETERMINATION OF THE FOAMING AND AIR RELEASE PROPERTIES OF INDUSTRIAL GEAR OILS USING A SPUR GEAR TEST RIG - FLENDER FOAM TEST PROCEDURE |
| DEFSTAN 91-59/1(1991) : 1991 | LUBRICATING OIL, EXTREME PRESSURE GRADE 75W - NATO CODE 0-186 - JOINT SERVICE DESIGNATION OEP-38 - LUBRICATING OIL, EXTREME PRESSURE GRADE 80W/90 - NATO CODE 0-226 |
| MIL L 24467 : 0 | LUBRICATING OIL, STEAM TURBINE, VAPOR-SPACE INHIBITED |
| MIL-PRF-46167 Revision D:2005 | Lubricating Oil, Internal Combustion Engine, Arctic |
| ISO 4113:2010 | Road vehicles — Calibration fluids for diesel injection equipment |
| MIL-PRF-9000 Revision L:2014 | Lubricating Oil, Shipboard Internal Combustion Engine, High-Output Diesel |
| MIL PRF 002104 : L | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
| API 1509 : 2002 | ENGINE OIL LICENSING AND CERTIFICATION SYSTEM |
| ASTM D 7578 : 2015-06 | GUIDE FOR CALIBRATION REQUIREMENTS FOR ELEMENTAL ANALYSIS OF PETROLEUM PRODUCTS AND LUBRICANTS |
| SAE J2360_201204 | Automotive Gear Lubricants for Commercial and Military Use |
| ASTM D 7776 : 2012 | Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017) |
| ASTM D 6666 : 2004 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| ASTM D 6666 : 2004 : R2009 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| ASTM D 7044 : 2015 : REDLINE | Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids |
| ASTM D 4485 : 2017-03 | SPECIFICATION FOR PERFORMANCE OF ACTIVE API SERVICE CATEGORY ENGINE OILS |
| ASTM D 8029 : 2017-08 | SPECIFICATION FOR BIODEGRADABLE, LOW AQUATIC TOXICITY HYDRAULIC FLUIDS |
| DEFSTAN 91-035/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
| DEFSTAN 91-101/2(1997) : 1997 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST |
| DEFSTAN 91-039/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
| DEFSTAN 91-100/2(1997) : 1997 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST |
| DEFSTAN 05-50(PT61)/2(2003) : 2003 AMD 1 2003 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 61: METHODS FOR TESTING GAS TURBINE ENGINE SYNTHETIC LUBRICANTS |
| DEFSTAN 91-113/2(2007) : 2007 | LUBRICATING OIL, ENGINE: SEVERE DUTY DIESEL, EXTENDED SERVICE - SAE 10W/30 NATO CODE: O-1176 JOINT SERVICE DESIGNATION: OMD-90 |
| ASHRAE GUIDELINE 40 : 2017 | REFRIGERATION OIL DESCRIPTION |
| 12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| MIL-PRF-6083 Revision G:2013 | Hydraulic Fluid, Petroleum Base, for Preservation and Operation |
| MIL H 6083 : E | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| MIL H 17672 : D | HYDRAULIC FLUID, PETROLEUM, INHIBITED |
| MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
| MIL-PRF-27601 Revision C:1998 | Hydraulic Fluid, Fire Resistant, Hydrogenated Polyalphaolefin Base, High Temperature, Flight Vehicle, Metric (No S/S Document) |
| MIL-H-46001 Revision D:1989 | Hydraulic Fluids, Petroleum Base, for Machine Tools (S/S by A-A-59354) |
| MIL-H-81019 Revision D:1984 | Hydraulic Fluid, Petroleum Base, Ultra-Low Temperature |
| MIL-PRF-32538 Base Document:2015 | Lubricating Oil, Helicopter Transmission System, Synthetic Base, NATO Code Number: O-165 |
| MIL-DTL-32353 Revision A:2012 | Hydraulic and Lubricating Oil, Synthetic Hydrocarbon Base |
| MIL L 6086 : D | LUBRICATING OIL, GEAR, PETROLEUM BASE |
| IEEE C57.637-2015 REDLINE | IEEE Guide for the Reclamation of Mineral Insulating Oil and Criteria for Its Use |
| SAE MS1004_201710 | Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification |
| SAE J357_201601 | Physical and Chemical Properties of Engine Oils |
| SAE MS1001_201708 | Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems - Specification |
| SAE MS1005_201708 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| ISO 9940:2015 | Aerospace series — Fluid, hydraulic, phosphate ester-base, fire resistant — Technical specification |
| MIL-DTL-83767 Revision C:2007 | Lubricating Oil, Vacuum Pump, Mechanical |
| BS ISO 4113:2010 | Road vehicles. Calibration fluids for diesel injection equipment |
| SAE J183_201708 | Engine Oil Performance and Engine Service Classification (Other than \"Energy Conserving\") |
| I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
| SAE J2979_201205 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relaxation (CSR) Response |
| MIL-PRF-6086 Revision F:2010 | Lubricating Oil, Gear, Petroleum Base (NATO O-153, O-155) |
| MIL-L-6082 Revision E:1990 | Lubricating Oil, Aircraft Piston Engine (Non-Dispersant Mineral Oil) (S/S by SAE-J1966) |
| DOD-PRF-85734 Revision A:2004 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| MIL-PRF-87100 Revision A:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| MIL-PRF-21260 Revision E:1998 | Lubricating Oil, Internal Combustion Engine, Preservative Break-in |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-PRF-32073 Revision A:2007 | Hydraulic Fluid, Biobased |
| ASTM D 6894 : 2013 : REDLINE | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| MIL-PRF-2104 Revision K:2016 | Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service |
| SAE MS1010_201212 | Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification |
| ASHRAE 99 : 2006 | REFRIGERATION OIL DESCRIPTION |
| SAE AS5780D | Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants |
| BS ISO 13628-6:2000 | Petroleum and natural gas industries. Design and operation of subsea production systems Design and operation of subsea controls |
| ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
| ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| 12/30234431 DC : 0 | BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| BS ISO 12152:2012 | Lubricants, industrial oils and related products. Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig. Flender foam test procedure |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| ISO 12152:2012 | Lubricants, industrial oils and related products — Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig — Flender foam test procedure |
| ASTM D 6158 : 2016-02 | SPECIFICATION FOR MINERAL HYDRAULIC OILS |
| SAE AIR81D | Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids |
| MIL C 8188 : C | CORROSION PREVENTIVE OIL, GAS TURBINE ENGINE, AIRCRAFT SYNTHETIC BASE |
| MIL L 2105 : D | LUBRICATING OIL, GEAR, MULTI PURPOSE |
| MIL-H-53119 Base Document:1991 | Hydraulic Fluid, Nonflammable, Chlorotrifluoroethylene Base |
| MIL-PRF-46170 Revision E:2013 | Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, NATO Code No. H-544 |
| ASTM D 6082 : 2012 : R2017 | Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| 04/302050 DC : DRAFT JAN 2004 | ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| MIL-L-22851 Revision D:1990 | Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) (S/S by SAE-J1899) |
| MIL-H-22072 Revision C:1984 | Hydraulic Fluid, Catapult, NATO Code Number H-579 |
| MIL-PRF-17672 Revision E:2010 | Hydraulic Fluid, Petroleum-Based, Inhibited |
| SAE MS1003_201803 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
| SAE MS1003/2_200401 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils – Specification - Addendum |
| DEFSTAN 91-43/2(1993) : 1993 | LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| SAE J1260_201210 | Standard Oil Filter Test Oil |
| ASTM D 6666 : 2004 : R2014 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| ASTM D 6082 : 2012 | Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
| ISO 13628-6:2006 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 6: Subsea production control systems |
| BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
| EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
| SAE MS1006_201803 | Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches - Specification |
| MIL H 27601 : B | HYDRAULIC FLUID, FIRE RESISTANT, HYDROGENATED POLYALPHAOLEFIN BASE, HIGH TEMPERATURE, FLIGHT VEHICLE, METRIC |
| SAE J2359_199811 | Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service |
| 08/30190684 DC : DRAFT OCT 2008 | BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
| SAE MS1002_201710 | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| 13/30290460 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
| SAE MS1000_201302 | Lubricants, Industrial Oils, and Related Products - Classification |
| ASTM D 7752 : 2018 : REDLINE | Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids |
| MIL L 2104 : F | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE |
| 08/30178041 DC : DRAFT FEB 2008 | BS ISO 4113 - ROAD VEHICLES - CALIBRATION FLUIDS FOR DIESEL INJECTION EQUIPMENT |
| SAE AS1241D | Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft |
| ASTM D 6666 : 2004 : R2019 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| MIL-L-27502 Base Document:1972 | Lubricating Oil, Aircraft Turbine Engine, Ester Base (No S/S Document) |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL-C-5545 Revision C:1983 | Corrosion Preventive, Aircraft Engine, Heavy Oil Type (No S/S Document) |
| SAE MS1009_201207 | Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils - Specification |
| SAE J1696_201704 | Standard Fuel Filter Test Fluid |
| IEEE 637-1985 | IEEE Guide for the Reclamation of Insulating Oil and Criteria for Its Use |
| ASTM D 4304 : 2017 : REDLINE | Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines |
| ASTM D 6224 : 2016 : REDLINE | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
| EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| CEI EN 61400-4 : 2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| SAE J311_200002 | Fluid for Passenger Car Type Automatic Transmissions |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E 128 : 1999 | Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.