![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 1 : 2014 : R2020
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for ASTM Liquid-in-Glass Thermometers
Hardcopy , PDF
English
29-05-2020
Committee |
E 20
|
DocumentType |
Standard
|
Pages |
51
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers liquid-in-glass thermometers graduated in degrees Celsius or degrees Fahrenheit that are frequently identified and used in methods under the jurisdiction of the various technical committees within ASTM. The various thermometers specified are listed in Table 1. The inclusion of an IP number in Table 1 indicates, where appearing, that the thermometer specification has been jointly agreed upon by the British Institute of Petroleum (IP) and ASTM.
1.2This specification also covers adjustable-range enclosed-scale thermometers, graduated in degrees Celsius, which are used in ASTM methods.
1.3The enclosed-scale thermometers are commonly called Beckmann thermometers. They are suitable for measuring small temperature differences not exceeding 6 °C within a larger range of temperature. The thermometers are unsuitable for measuring Celsius- or kelvin-scale temperatures unless they have been compared with standard instruments immediately before use.
1.4An alphabetic list of the ASTM Thermometers included in this standard is given in Table 2.
1.5A list of ASTM Thermometers is given in Table 3 to facilitate selection according to temperature range, immersion, and scale-error requirements.
Note 1:For a listing of thermometers recommended for general laboratory use, the Scientific Apparatus Makers Association Specifications for General Purpose Glass Laboratory Thermometers may be consulted.2
Note 2:It has been found by experience that these ASTM Thermometers, although developed in general for specific tests, may also be found suitable for other applications, thus precluding the need for new thermometer specifications differing in only minor features. However, it is suggested that technical committees contact Subcommittee E20.05 before choosing a currently specified thermometer for a new method to be sure the thermometer will be suitable for the intended application.
1.6The thermometers found in Table 1 contain mercury, mercury thallium eutectic alloy, or toluene or other suitable liquid colored with a permanent red dye. For low-hazard precision non-mercury alternatives to E1 thermometers, see Specification E2251.
1.7WARNING—Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website- http://www.epa.gov/mercury/faq.htm - for additional information. Users should be aware that selling mercury and/or mercury containing products into your state may be prohibited by state law.
1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 1669/D1669M : 2007 : R2023 | Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings |
ASTM D 891 : 2018 | Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals |
ASTM D 8040 : 2018 | Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware |
ASTM D 3603 : 2020 | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
ASTM D 87 : 2009 : R2018 | Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve) |
ASTM E 100 : 2019 | Standard Specification for ASTM Hydrometers |
ASTM D 873 : 2022 | Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) |
ASTM D 6267/D6267M : 2013 : R2022 | Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures |
ASTM D 2171/D2171M : 2022 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
ASTM D 6511/D6511M : 2018 | Standard Test Methods for Solvent Bearing Bituminous Compounds |
ASTM D 3143/D3143M : 2019 | Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus |
ASTM D 1480 : 2021 | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer |
ASTM D 3289 : 2017 : R2022 | Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method) |
ASTM D 5478 : 2013 : R2022 | Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer |
ASTM D 7402 : 2009 : R2017 | Standard Practice for Identifying Cationic Emulsified Asphalts |
ASTM D 5404/D5404M : 2021 | Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator |
ASTM D 7280 : 2020 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration |
ASTM D 524 : 2015 : R2019 | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
ASTM D 3791/D3791M : 2011 : R2018 | Standard Practice for Evaluating the Effects of Heat on Asphalts |
ASTM D 6356/D6356M : 1998 : R2018 | Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
ASTM D 5/D5M : 2020 | Standard Test Method for Penetration of Bituminous Materials |
ASTM D 4423 : 2023 | Standard Test Method for Determination of Carbonyls in C<inf>4</inf> Hydrocarbons |
ASTM D 7820 : 2019 | Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel |
ASTM E 224 : 2023 | Standard Test Methods for Analysis of Hydrochloric Acid |
ASTM D 6926 : 2020 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
ASTM D 7154 : 2015 : R2021 : EDT 1 | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) |
ASTM D 746 : 2020 | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
ASTM D 1824 : 2016 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
ASTM D 4493 : 2020 | Standard Test Method for Solidification Point of Bisphenol A<brk/>(4,4<emph type="ital" >′</emph>-Isopropylidenediphenol) |
ASTM D 2386 : 2019 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 70/D70M : 2021 | Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
ASTM D 2319/D2319M : 2020 | Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) |
ASTM D 1217 : 2020 | Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
ASTM D 4308 : 2021 | Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter |
ASTM D 323 : 2020 : REV A | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
ASTM D 2893 : 2019 | Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils |
ASTM F 558 : 2021 | Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners |
ASTM D 4809 : 2018 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 1519 : 1995 : R2019 | Standard Test Methods for Rubber Chemicals—Determination of Melting Range |
ASTM D 3685/D3685M : 2013 : R2021 | Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
ASTM D 4539 : 2022 | Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) |
ASTM D 6997 : 2012 : R2020 | Standard Test Method for Distillation of Emulsified Asphalt |
ASTM D 1525 : 2017 : EDT 1 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 6371 : 2017 : REV A | Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels |
ASTM D 7496 : 2018 | Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer |
ASTM D 2726/D2726M : 2021 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures |
ASTM D 501 : 2003 : R2023 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
ASTM D 1795 : 2013 : R2021 | Standard Test Method for Intrinsic Viscosity of Cellulose |
ASTM D 1465 : 2010 : R2021 | Standard Test Method for Blocking and Picking Points of Petroleum Wax |
ASTM D 1881 : 2017 | Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
ASTM D 5891/D5891M : 2019 | Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners |
ASTM D 5125 : 2010 : R2020 : EDT 1 | Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups |
ASTM D 1608 : 2016 | Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023) |
ASTM F 820 : 2021 | Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems |
ASTM D 2170/D2170M : 2022 | Standard Test Method for Kinematic Viscosity of Asphalts |
ASTM D 1321 : 2016 : REV A | Standard Test Method for Needle Penetration of Petroleum Waxes |
ASTM D 5890 : 2019 | Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners |
ASTM D 1817 : 2005 : R2021 | Standard Test Method for Rubber Chemicals—Density |
ASTM D 2318 : 2020 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
ASTM D 5726 : 1998 : R2020 | Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
ASTM D 244 : 2009 : R2017 | Standard Test Methods and Practices for Emulsified Asphalts |
ASTM D 2162 : 2021 | Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
ASTM D 6572 : 2021 | Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
ASTM E 711 : 2023 : EDT 1 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
ASTM D 2532 : 2022 | Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants |
ASTM D 139 : 2016 | Standard Test Method for Float Test for Bituminous Materials |
ASTM D 1875 : 2003 : R2018 | Standard Test Method for Density of Adhesives in Fluid Form |
ASTM D 233 : 2013 : R2022 | Standard Test Methods of Sampling and Testing Turpentine |
ASTM D 525 : 2012 : REV A : R2019 | Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) |
ASTM E 324 : 2023 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals |
ASTM D 2500 : 2023 | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels |
ASTM D 3142/D3142M : 2017 | Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method |
ASTM D 6331 : 2016 | Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
ASTM E 50 : 2017 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
ASTM D 6922 : 2013 : R2018 | Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils |
ASTM D 562 : 2010 : R2023 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
ASTM E 644 : 2011(R2019) | Standard Test Methods for Testing Industrial Resistance Thermometers |
ASTM D 4693 : 2007 : R2021 | Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings |
ASTM D 287 : 2022 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method) |
ASTM D 92 : 2018 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
ASTM D 240 : 2019 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
ASTM D 4486 : 2018 | Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids |
ASTM D 1188/D1188M : 2022 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples |
ASTM D 1092 : 2020 | Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases |
ASTM D 889 : 2023 | Standard Test Method for Volatile Oil in Rosin |
ASTM G 42 : 2011 : R2019 : EDT 1 | Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures |
ASTM D 7667 : 2021 | Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method |
ASTM D 4713 : 2012 : R2020 | Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems |
ASTM E 102/E102M : 1993 : R2021 | Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
ASTM D 5304 : 2020 | Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure |
ASTM D 3625/D3625M : 2020 | Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water |
ASTM D 2265 : 2022 | Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range |
ASTM D 3716 : 2014 : R2020 | Standard Test Methods for Use of Emulsion Polymers in Floor Polishes |
ASTM D 5958 : 1999 : R2020 | Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
ASTM D 3934 : 2020 | Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus |
ASTM D 36/D36M : 2014 : R2020 | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
ASTM D 852 : 2020 | Standard Test Method for Solidification Point of Benzene |
ASTM D 1982 : 2013 : R2022 | Standard Test Method for Titer of Fatty Acids |
ASTM D 4310 : 2022 : REV A | Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils |
ASTM D 189 : 2006 : R2019 | Standard Test Method for Conradson Carbon Residue of Petroleum Products |
ASTM D 4532 : 2022 | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
ASTM D 4953 : 2020 | Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) |
ASTM D 56 : 2022 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
ASTM D 6/D6M : 1995 : R2018 | Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds |
ASTM D 4830/D4830M : 1998 : R2021 | Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
ASTM E 220 : 2019 | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
ASTM D 113 : 2017 | Standard Test Method for Ductility of Asphalt Materials |
ASTM D 4298 : 2022 | Standard Guide for Intercomparing Permeation Tubes to Establish Traceability |
ASTM D 93 : 2020 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
ASTM D 5167 : 2013 : R2018 | Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation |
ASTM E 3399 : 2023 | Standard Test Method for Non-volatile Residue in Ethanol and Ethanol Solutions |
ASTM D 611 : 2023 | Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents |
ASTM D 850 : 2021 | Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
ASTM E 223 : 2023 : EDT 1 | Standard Test Methods for Analysis of Sulfuric Acid |
ASTM D 1218 : 2021 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
ASTM D 4742 : 2017 | Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT) |
ASTM D 4615 : 2022 | Standard Specification for <emph type="ital">n</emph>-Butyl Acetate (All Grades) |
ASTM D 942 : 2019 | Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method |
ASTM D 61 : 2015 : R2019 | Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) |
ASTM D 3944 : 2012 : R2017 | Standard Test Method for Solidification Point of Petroleum Wax |
ASTM D 5062 : 2009 : R2020 | Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination |
ASTM D 7098 : 2021 | Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B |
ASTM D 1384 : 2005 : R2019 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
ASTM D 5551 : 1995 : R2019 | Standard Test Method for Determination of the Cloud Point of Oil |
ASTM D 5165 : 2012 : R2020 | Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle |
ASTM D 4870 : 2022 | Standard Test Method for Determination of Total Sediment in Residual Fuels |
ASTM D 1120 : 2022 | Standard Test Method for Boiling Point of Engine Coolants |
ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
ASTM D 5015 : 2015 : R2022 | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
ASTM D 97 : 2017 : REV B : R2022 | Standard Test Method for Pour Point of Petroleum Products |
ASTM D 6933 : 2022 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) |
ASTM D 5249 : 2010 : R2021 | Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints |
ASTM D 6327 : 2010 : R2021 | Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
ASTM D 1078 : 2011 : R2019 | Standard Test Method for Distillation Range of Volatile Organic Liquids |
ASTM E 133 : 1992 : R2022 | Standard Specification for Distillation Equipment |
ASTM D 6084/D6084M : 2021 | Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer |
ASTM D 4096 : 2017 | Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method) |
ASTM D 1823 : 2016 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer |
ASTM D 665 : 2019 | Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water |
ASTM D 892 : 2018 : EDT 1 | Standard Test Method for Foaming Characteristics of Lubricating Oils |
ASTM E 344 : 2020 | Terminology Relating to Thermometry and Hydrometry |
ASTM D 5006 : 2011 : R2021 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 5853 : 2017 : REV A | Standard Test Method for Pour Point of Crude Oils |
ASTM D 3235 : 2016 : EDT 1 | Standard Test Method for Solvent Extractables in Petroleum Waxes |
ASTM D 3941 : 2020 | Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus |
ASTM D 1439 : 2022 | Standard Test Methods for Sodium Carboxymethylcellulose |
ASTM D 1298 : 2012 : REV B : R2017 : EDT 1 | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 4530 : 2015 : R2020 | Standard Test Method for Determination of Carbon Residue (Micro Method) |
ASTM D 6209 : 2021 | Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
ASTM D 6333 : 2017 | Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
ASTM D 1754/D1754M : 2020 | Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
ASTM D 1747 : 2009 : R2019 | Standard Test Method for Refractive Index of Viscous Materials |
ASTM D 86 : 2023 | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
ASTM D 1025 : 2023 | Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene |
ASTM D 3608 : 2019 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
ASTM D 2112 : 2015 | Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel |
ASTM D 2914 : 2015 : R2022 | Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) |
ASTM D 721 : 2017 | Standard Test Method for Oil Content of Petroleum Waxes |
ASTM D 1607 : 1991 : R2018 : EDT 1 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
ASTM D 7840 : 2012 : R2017 | Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware |
ASTM E 2488 : 2022 | Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison |
ASTM D 381 : 2022 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
ASTM E 28 : 2018 : R2022 | Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus |
ASTM D 3609 : 2022 | Standard Practice for Calibration Techniques Using Permeation Tubes |
ASTM F 2826 : 2014 : R2018 | Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units |
ASTM D 6937 : 2016 | Standard Test Method for Determining Density of Emulsified Asphalt |
ASTM F 482 : 2009 : R2020 | Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals |
ASTM D 4171 : 2022 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 5534 : 1994 : R2018 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
ASTM F 2105 : 2021 | Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems |
ASTM D 243/D243M : 2022 | Standard Test Method for Residue of Specified Penetration |
ASTM D 943 : 2020 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
ASTM D 2024 : 2009 : R2023 | Standard Test Method for Cloud Point of Nonionic Surfactants |
ASTM D 1310 : 2014 : R2021 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
ASTM D 1657 : 2022 : EDT 1 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
ASTM D 5801 : 2017 | Standard Test Method for Toughness and Tenacity of Asphalt Materials |
ASTM D 127 : 2019 | Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum |
ASTM D 3195/D3195M : 2010 : R2015 | Standard Practice for Rotameter Calibration |
ASTM D 4957 : 2018 | Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer |
ASTM D 938 : 2012 : R2017 | Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum |
ASTM D 3162 : 2021 | Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry) |
ASTM D 1200 : 2023 | Standard Test Method for Viscosity by Ford Viscosity Cup |
ASTM D 4746 : 2020 | Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration |
ASTM D 6493 : 2011 : R2022 | Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus |
ASTM D 8164 : 2021 | Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing |
ASTM D 7873 : 2022 : REV A | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
ASTM E 126 : 2019 | Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers |
ASTM D 6931 : 2017 | Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures |
ASTM D 445 : 2021 : EDT 2 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
ASTM D 8254 : 2019 | Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester |
ASTM D 8055 : 2023 | Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards |
ASTM D 3427 : 2019 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
ASTM D 7671 : 2021 | Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method |
ASTM D 2872 : 2022 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) |
ASTM D 3326 : 2007 : R2017 | Standard Practice for Preparation of Samples for Identification of Waterborne Oils |
ASTM D 5058 : 2012 : R2020 | Standard Practices for Compatibility of Screening Analysis of Waste |
ASTM D 648 : 2018 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
ASTM D 5346 : 2017 : R2021 | Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds |
ASTM D 1981 : 2011 : R2020 : EDT 1 | Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids |
ASTM D 6351 : 2022 | Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids |
ASTM D 2983 : 2022 | Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
ASTM D 130 : 2019 | Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test |
ASTM D 1177 : 2022 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
ASTM D 1045 : 2019 | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
ASTM D 7095 : 2017 | Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip |
ASTM D 1153 : 2022 | Standard Specification for Methyl Isobutyl Ketone |
ASTM E 337 : 2015 : R2023 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM D 1856 : 2021 | Standard Test Method for Recovery of Asphalt from Solution by Abson Method |
ASTM D 4212 : 2016 : R2023 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
ASTM E 563 : 1997 | Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature |
ASTM E 344 : 2023 | Terminology Relating to Thermometry and Hydrometry |
ASTM E 344 : 2018 | Terminology Relating to Thermometry and Hydrometry |
ASTM E 344 : 2001 : REV A | Terminology Relating to Thermometry and Hydrometry |
ASTM E 2251 : 2014 : R2021 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM E 77 : 2014 : EDT 1 | Standard Test Method for Inspection and Verification of Thermometers |
ASTM E 563 : 2022 | Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature |
ASTM E 2251 : 2014 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM E 563 : 2011 : R2016 | Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature |
ASTM E 77 : 1998 | Standard Test Method for Inspection and Verification of Thermometers |
ASTM E 77 : 2014 : R2021 | Standard Test Method for Inspection and Verification of Thermometers |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.