ASTM D 6329 : 1998
|
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
ASTM F 2420 : 2005
|
Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood |
ASTM C 567 : 2005 : REV A
|
Standard Test Method for Determining Density of Structural Lightweight Concrete |
ASTM F 1927 : 2014 : REDLINE
|
Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector |
BS IEC 61189-5-2 : 2015
|
TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING FLUX FOR PRINTED BOARD ASSEMBLIES |
ASTM D 2741 : 1995
|
Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation |
ASTM C 1498 : 2004 : REV A : R2016
|
Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
ASTM D 6490 : 1999
|
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
ASTM D 2095 : 1996 : R2008
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
ASTM F 2420 : 2005 : R2011
|
Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood (Withdrawn 2014) |
ASTM D 2803 : 2009
|
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
ASTM D 1779 : 1998 : R2017
|
Standard Specification for Adhesive for Acoustical Materials |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM F 556 : 1988 : R2006
|
Standard Test Method for Curl of Carbonless Copy Papers |
ASTM D 2918 : 1999
|
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
ASTM F 415 : 1987 : R2010
|
Standard Test Method for Curl in Carbon Paper (Withdrawn 2016) |
ASTM D 4933 : 2016 : REDLINE
|
Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
ASTM D 4470 : 1997 : R2004
|
Standard Test Method for Static Electrification |
IEC 61189-5-2:2015
|
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies |
ASTM C 1792 : 2014
|
Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023) |
ASTM D 4470 : 1997 : R2010
|
Standard Test Method for Static Electrification |
ASTM D 1779 : 1998
|
Standard Specification for Adhesive for Acoustical Materials |
ASTM D 3089 : 1997 : R2003
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM F 556 : 1988 : R2011
|
Standard Test Method for Curl of Carbonless Copy Papers (Withdrawn 2020) |
ASTM D 6490 : 1999 : R2006
|
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
ASTM C 1498 : 2004 : REV A
|
Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
ASTM D 1356 : 2017 : REDLINE
|
Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM F 415 : 1987 : R2000 : EDT 1
|
Standard Test Method for Curl in Carbon Paper |
ASTM D 6329 : 1998 : R2003
|
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
ASTM C 682 : 1994
|
Standard Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures (Withdrawn 2003) |
ASTM D 2741 : 1995 : R2001
|
Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation |
ASTM D 3482 : 2007 : REV A
|
Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
ASTM D 1458 : 2013-12
|
TEST METHODS FOR FULLY CURED SILICONE RUBBER-COATED GLASS FABRIC AND TAPES FOR ELECTRICAL INSULATION |
ASTM D 6329 : 1998 : R2008
|
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
ASTM D 3983 : 1998 : R2004
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
ASTM D 3983 : 1998 : R2019
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
ASTM D 4000 : 2016 : REDLINE
|
Standard Classification System for Specifying Plastic Materials |
ASTM F 556 : 1988 : R1996 : EDT 1
|
Standard Test Method for Curl of Carbonless Copy Papers |
ASTM D 2803 : 2009 : R2015
|
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
ASTM D 1779 : 1998 : R2004
|
Standard Specification for Adhesive for Acoustical Materials |
ASTM D 902 : 2012 : REDLINE
|
Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
ASTM D 3983 : 1998 : R2011
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
BS EN 61189-5-2:2015
|
Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering flux for printed board assemblies |
ASTM F 372 : 1999
|
Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique |
ASTM D 618 : 2013 : REDLINE
|
Standard Practice for Conditioning Plastics for Testing |
ASTM C 1498 : 2004 : REV A : R2010 : EDT 1
|
Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
ASTM D 6490 : 1999 : R2014
|
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
ASTM C 1498 : 2004
|
Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
ASTM D 2095 : 1996 : R2015
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
SAE AS 85485 : 2017
|
CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
IEEE C57.12.60-2009 REDLINE
|
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers |
ASTM D 1653 : 2013 : REDLINE
|
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM D 3482 : 2007 : REV A : R2014
|
Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
TAPPI T 557 : 0
|
WATER VAPOUR TRANSMISSION RATE THROUGH PLASTIC FILM AND SHEETING USING A MODULATED INFRARED SENSOR |
ASTM F 556 : 1988 : R2001
|
Standard Test Method for Curl of Carbonless Copy Papers |
ASTM D 876 : 2013 : REDLINE
|
Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
ASTM F 415 : 1987 : R2005
|
Standard Test Method for Curl in Carbon Paper |
CSA S806: 2012
|
DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
S806-12 (R2017)
|
Design and construction of building structures with fibre-reinforced polymers |
13/30238570 DC : 0
|
BS ISO 16533 - TEXTILES - MEASUREMENT OF EXOTHERMIC AND ENDOTHERMIC PROPERTIES OF TEXTILES UNDER HUMIDITY CHANGE |
CSA A23.1 A23.2 : 2014
|
CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
ASTM D 3482 : 2007
|
Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
ASTM D 3089 : 1997
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
00/122905 DC : DRAFT JULY 2000
|
BS 1339-3 - GUIDE TO THE MEASUREMENT OF HUMIDITY |
BS ISO 16533:2014
|
Textiles. Measurement of exothermic and endothermic properties of textiles under humidity change |
ASTM D 115 : 2017 : REDLINE
|
Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
ASTM D 257 : 2014 : REDLINE
|
Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
ASTM C 567/C567M : 2014 : REDLINE
|
Standard Test Method for Determining Density of Structural Lightweight Concrete |
ASTM D 2918 : 1999 : R2005
|
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
ASTM D 2918 : 1999 : R2012
|
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
ASTM D 2095 : 1996 : R2002
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
ASTM D 6329 : 1998 : R2015
|
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
ASTM D 1779 : 1998 : R2011
|
Standard Specification for Adhesive for Acoustical Materials |
ASTM D 3090 : 1972 : R2008
|
Standard Practice for Storage Testing of Aerosol Products |
ASTM D 7444 : 2011
|
Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics |
ASTM D 4470:1997
|
Standard Test Method for Static Electrification |
ISO 16533:2014
|
Textiles Measurement of exothermic and endothermic properties of textiles under humidity change |
ASTM C 567 : 2005
|
Standard Test Method for Determining Density of Structural Lightweight Concrete |
MIL-STD-2223 Base Document:1992
|
TEST METHODS FOR INSULATED ELECTRIC WIRE |
ASTM F 1249 : 2013 : REDLINE
|
Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
ASTM D 3983 : 1998
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
ASTM F 372 : 1999 : R2003
|
Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique (Withdrawn 2009) |
IEEE C57.12.56-1986
|
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers |
I.S. EN 61189-5-2:2015
|
TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING FLUX FOR PRINTED BOARD ASSEMBLIES |
ASTM F 74 : 1973 : R1989
|
Practice for Determining Hydrolytic Stability of Plastic Encapsulants for Electronic Devices (Withdrawn 1994) |
ASTM D 2095 : 1996 : EDT 1
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
ASTM D 2741 : 1995 : R2005
|
Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation (Withdrawn 2011) |
EN 61189-5-2:2015
|
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies |