ASTM E 1402 : 2013 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Sampling Design
Hardcopy , PDF
18-11-2023
English
12-11-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 11
|
| DocumentType |
Guide
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide defines terms and introduces basic methods for probability sampling of discrete populations, areas, and bulk materials. It provides an overview of common probability sampling methods employed by users of ASTM standards.
1.2Sampling may be done for the purpose of estimation, of comparison between parts of a sampled population, or for acceptance of lots. Sampling is also used for the purpose of auditing information obtained from complete enumeration of the population.
1.3No system of units is specified in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7659 : 2021 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
| ASTM E 1488 : 2012 : R2023 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 1732 : 2022 | Standard Terminology Relating to Forensic Science |
| ASTM E 3264 : 2021 | Standard Guide for Homogeneity of Samples and Reference Materials Used for Inter- and Intra-Laboratory Studies |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 2334 : 2009 : R2023 | Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| ASTM E 1367 : 2003 : R2023 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM C 1285 : 2021 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
| ASTM C 1869 : 2018 : R2023 | Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
| ASTM E 141 : 2010 : R2023 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
| ASTM C 1869 : 2018 | Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
| ASTM D 7659 : 2010 : R2015 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
| ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM F 3295 : 2018 | Standard Guide for Impingement Testing of Total Disc Prostheses |
| ASTM E 1706 : 2019 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM E 2655 : 2014 : R2020 | Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2334 : 2009 : R2018 | Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| ASTM E 1488 : 2012 : R2018 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 141 : 2010 : R2018 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
| ASTM F 1089 : 2018 | Standard Test Method for Corrosion of Surgical Instruments |
| ASTM E 105 : 2016 | Standard Practice for Probability Sampling of Materials |
| ASTM C 1285 : 2014 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
| ASTM F 3207 : 2017 | Standard Guide for <emph type="bdit">in vivo</emph> Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 7430 : 2016 | Standard Practice for Mechanical Sampling of Coal |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 122 : 2017 : R2022 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 122 : 2017 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
| ASTM D 7430 : 2016 : REV A | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2017 | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2018 : REV A | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2016 : REV B | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2015 : REV A | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2015 | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2016 : REV B : EDT 1 | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2018 : REV A : EDT 1 | Standard Practice for Mechanical Sampling of Coal |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 7430 : 2008 | Standard Practice for Mechanical Sampling of Coal |
| ASTM D 7430 : 2018 | Standard Practice for Mechanical Sampling of Coal |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.