![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 1605 : 2018 : REV B
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Terminology Relating to Lead in Buildings
Hardcopy , PDF
18-04-2020
English
15-12-2018
This terminology standard covers definitions for the following: 1.1.1Terms that are commonly used in the field of management of lead hazards in facilities; 1.1.2Architectural terms, particularly those associated with older wood-frame buildings; and, 1.1.3Specialized terms that may be encountered by users in reports and notices that are generated during lead hazard management activities.
Committee |
D 22
|
DocumentType |
Reference Material
|
Pages |
10
|
ProductNote |
THIS STANDARD ALSO REFERS TO 40 CFR 745.227,40 CFR 745.226,40 CFR 261,40 CFR 745.223,HUD Guidelines,HUD Interim Guidelines,IEEE/ASTM SI-10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This terminology standard covers definitions for the following:
1.1.1Terms that are commonly used in the field of management of lead hazards in facilities;
1.1.2Architectural terms, particularly those associated with older wood-frame buildings; and,
1.1.3Specialized terms that may be encountered by users in reports and notices that are generated during lead hazard management activities.
1.2This terminology standard is supplementary to Terminology E631.
1.3Definitions adopted or derived from other documents include the following:
1.3.1Some of the definitions in this terminology standard are adopted as exact copies from other sources. The source is briefly identified at the right margin following the definition and fully identified in Section 2.
1.3.2Some of the definitions in this terminology standard are adapted from other sources. Changes in these definitions were made only to clarify the meaning, to incorporate related terms that also are defined in this terminology standard, or to ensure that the revised definition is consistent with those for related terms. The source is briefly identified with the words “adapted” at the right margin following the definition, and is fully identified in Section 2.
1.4Terms within the definitions that are shown in boldface are defined in this terminology standard.
1.5This terminology standard excludes the following:
1.5.1Terms with a common dictionary meaning, except in cases where there is a specialized definition within the field of lead hazard management.
1.5.2Terms that are used only in individual ASTM standards in which they are defined adequately, whether formally or by the context in which they appear.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2882 : 2019 | Standard Guide for Analysis of Clandestine Drug Laboratory Evidence |
ASTM E 1753 : 2019 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 2914/E2914M : 2019 | Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
ASTM E 2913/E2913M : 2019 | Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples |
ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 2120 : 2010 : R2016 | Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
ASTM E 2882 : 2012 | Standard Guide for Analysis of Clandestine Drug Laboratory Evidence |
ASTM E 3074/E3074M : 2016 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities |
ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM E 2252 : 2018 | Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities |
ASTM E 1645 : 2016 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1583 : 2017 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
ASTM E 2255/E2255M : 2018 : REV A | Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings |
ASTM E 1795 : 2017 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 2115 : 2015 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
ASTM E 2271/E2271M : 2018 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings |
ASTM E 1775 : 2016 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM E 2239 : 2012 : R2016 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 2119 : 2016 | Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices |
ASTM E 3203 : 2019 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
ASTM E 1726 : 2016 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 1796 : 2003 : R2016 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1728 : 2016 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM D 7659 : 2010 : R2015 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
ASTM E 3193 : 2019 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
ASTM E 1979 : 2017 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM D 2864 : 2009 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1796 : 1997 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1792 : 2001 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1913 : 2004 : R2012 | <i xmlns:a="http://library.astm.org" xmlns="">Myriophyllum sibiricum</i> |
ASTM E 1777 : 1996 | Standard Guide for Prioritization of Data Needs for Pavement Management |
ASTM E 1753 : 2001 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM D 4538 : 2005 : EDT 1 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 1753 : 1995 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM D 4538 : 2005 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 1753 : 2019 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1796 : 2003 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1644 : 2004 : R2012 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 2864 : 2017 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1979 : 2004 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1914 : 1998 | Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis |
ASTM E 2115 : 2000 | Standard Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children |
ASTM E 1187 : 1997 | Standard Terminology Relating to Conformity Assessment (Withdrawn 2006) |
ASTM E 1728 : 1999 | Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 1553 : 1993 | Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002) |
ASTM E 1753 : 2018 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM D 4538 : 2015 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 2115 : 2006 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities (Withdrawn 2015) |
ASTM E 1727 : 2005 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014) |
ASTM E 2239 : 2012 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 1913 : 2004 | Standard Guide for Conducting Static, Axenic, 14-Day Phytotoxicity Tests in Test Tubes with the Submersed Aquatic Macrophyte, <i>Myriophyllum sibiricum Komarov</i> |
ASTM E 1908 : 1997 | Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb) |
ASTM E 1979 : 2012 : R2016 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1753 : 2018 : REV A | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM D 2864 : 2006 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1908 : 2003 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM E 2239 : 2012 : R2016 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 1728 : 2016 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1753 : 2013 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1908 : 2010 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM E 1613 : 1999 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
ASTM E 1796 : 2003 : R2016 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1727 : 1999 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 1979 : 2017 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM D 2864 : 2010 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1728 : 2002 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1792 : 2002 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1777 : 2009 : R2015 | Standard Guide for Prioritization of Data Needs for Pavement Management |
ASTM D 4214 : 1998 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007) |
ASTM E 1913 : 1997 | Standard Guide for Conducting Static, Axenic, 14-Day Phytotoxicity Tests in Test Tubes with the Submersed Aquatic Macrophyte, <i>Myriophyllum sibiricum Komarov</i> |
ASTM E 1979 : 2012 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM D 2864 : 2002 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM D 2864 : 2000 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM D 4214 : 2007 : R2015 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
ASTM E 1728 : 2010 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM D 4214 : 2007 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
ASTM E 1777 : 2009 | Standard Guide for Prioritization of Data Needs for Pavement Management |
ASTM D 4538 : 2013 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 1613 : 2004 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
ASTM E 1914 : 2007 | Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis (Withdrawn 2016) |
ASTM E 2115 : 2015 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
ASTM E 2239 : 2003 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM D 2864 : 2010 : EDT 1 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1792 : 2001 : EDT 1 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1644 : 2004 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1727 : 2004 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM F 1156 : 1994 | Terminology Relating to Product Counterfeit Protection Systems (Withdrawn 2001) |
ASTM E 2115 : 2005 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and Other Facilities Frequented by Children |
ASTM D 2864 : 2019 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1979 : 1998 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 2239 : 2004 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 1644 : 1998 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 4538 : 1995 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM D 2864 : 2007 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1792 : 1996 : REV A | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 2115 : 2005 : REV A | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
ASTM E 1644 : 2004 : R2016 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1753 : 2004 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM E 1728 : 2003 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1796 : 2003 : R2011 : EDT 1 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1908 : 2016 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM D 2864 : 2017 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 2239 : 2002 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 2052 : 1999 | Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.