• There are no items in your cart

ASTM E 169 : 2016 : REDLINE

Current

Current

The latest, up-to-date edition.

Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

Available format(s)

PDF

Language(s)

English

Published date

11-05-2016

€67.30
Excluding VAT

CONTAINED IN VOL. 03.06, 2016 Gives general information on the techniques most often used in ultraviolet and visible quantitative analysis.

Committee
E 13
DocumentType
Redline
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current

1.1These practices are intended to provide general information on the techniques most often used in ultraviolet and visible quantitative analysis. The purpose is to render unnecessary the repetition of these descriptions of techniques in individual methods for quantitative analysis.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM E 60 : 2011 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
ASTM D 5412 : 1993 : R2011 : EDT 1 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D 6258 : 2017 : REDLINE Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM E 925 : 2009 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM D 1840 : 2007 : R2013 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 5831 : 2017 : REDLINE Standard Practice for Screening Fuels in Soils
ASTM D 5577 : 1994 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM D 5412 : 1993 : R2005 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D 5577 : 1994 : R2003 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM D 6187 : 1997 : R2010 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence (Withdrawn 2019)
ASTM D 5412 : 1993 : R2011 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D 6187 : 1997 : R2003 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM D 3935 : 2015 : REDLINE Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D 1840 : 2007 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 5412 : 1993 : R2000 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM E 925 : 2009 : R2014 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM D 6187 : 1997 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM D 5412 : 1993 : R2017 : EDT 1 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D 5412 : 1993 TEST METHOD FOR QUANTIFICATION OF COMPLEX POLYCYCLIC AROMATIC HYDROCARBON MIXTURES OR PETROLEUM OILS IN WATER
BS ISO 18436-5:2012 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst
MIL-DTL-15000 Revision L:2017 WATER-TESTING CHEMICALS, BOILER, SHIPBOARD USE
ASTM E 2193 : 2016 : REDLINE Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM D 2703 : 1995 Standard Practice for Rubber Chemicals-Determination of Ultraviolet Absorbance Characteristics (Withdrawn 2000)
ISO 18436-5:2012 Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst
SAE AMS P 46144 : 2015 PLASTIC SHEET, POLYCARBONATE
08/30190684 DC : DRAFT OCT 2008 BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST
UNI ISO 18436-5 : 2013 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST
ASTM E 275 : 2008 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM D 5577 : 1994 : R2010 : EDT 1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019)
ASTM E 60 : 2011 : R2016 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

ASTM E 275 : 2008 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E 958 : 2013 : REDLINE Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E 168 : 2016 Standard Practices for General Techniques of Infrared Quantitative Analysis

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.