Skip to content
Please enter a keyword to search

  • ASTM E 2009 : 2008 : R2014 : EDT 1

    Current The latest, up-to-date edition.

    Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  30-04-2014

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    These test methods describe the determination of the oxidative properties of hydrocarbons by differential scanning calorimetry or pressure differential scanning calorimetry under linear heating rate conditions and are applicable to hydrocarbons, which oxidize exothermically in their analyzed form.

    Scope - (Show below) - (Hide below)

    1.1These test methods describe the determination of the oxidative properties of hydrocarbons by differential scanning calorimetry or pressure differential scanning calorimetry under linear heating rate conditions and are applicable to hydrocarbons, which oxidize exothermically in their analyzed form.

    1.2Test Method A—A differential scanning calorimeter (DSC) is used at ambient pressure, of one atmosphere of oxygen.

    1.3Test Method B—A pressure DSC (PDSC) is used at high pressure, for example, 3.5 MPa (500 psig) oxygen.

    1.4Test Method C—A differential scanning calorimeter (DSC) is used at ambient pressure of one atmosphere of air.

    1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee E 37
    Document Type Test Method
    Product Note Reconfirmed EDT 1 ε1 NOTE—Warning notes were editorially updated throughout in March 2014.
    Publisher American Society for Testing and Materials
    Status Current
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM E 2744 : 2021 Standard Test Method for Pressure Calibration of Thermal Analyzers
    ASTM E 2744 : 2016 : EDT 1 Standard Test Method for Pressure Calibration of Thermal Analyzers

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 473 : 2022 : REV D Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 4565 : 2015 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
    ASTM D 5483 : 2002 : EDT 1 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 3895 : 1998 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM D 5483 : 2005 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM E 473 : 2022 Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 473 : 2021 Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 1858 : 1997 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calirometry
    ASTM D 3350 : 2000 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3895 : 2007 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM E 1858 : 2003 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
    ASTM D 3895 : 2019 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM D 5483 : 2021 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 3895 : 2006 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM D 3350 : 2008 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3895 : 2003 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM E 473 : 2022 : REV B Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 3350 : 2021 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM E 473 : 2018 Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM D 3350 : 2002 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3350 : 2014 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 5483 : 2020 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 5483 : 2005 : R2010 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 3895 : 2014 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM E 473 : 2022 : REV C Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 3350 : 2004 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3350 : 2002 : REV A Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3350 : 2012 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3350 : 2001 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3350 : 2012 : EDT 1 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM E 1858 : 2008 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
    ASTM D 3895 : 2002 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM D 3895 : 2004 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM D 4565 : 2010 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
    ASTM D 4565 : 1999 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
    ASTM D 5483 : 2002 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 4565 : 1990 Standard Test Methods for Physical and Enviormental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
    ASTM D 3350 : 2010 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 4565 : 1990 : REV A Standard Test Methods for Physical and Enviormental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
    ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    ASTM D 3350 : 2006 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM E 473 : 2021 : REV A Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM D 3350 : 2010 : REV A Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM D 3350 : 2014 : REDLINE Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM E 1858 : 2008 : R2015 : EDT 1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
    ASTM E 473 : 2022 : REV A Standard Terminology Relating to Thermal Analysis and Rheology
    ASTM E 473 : 2016-05 TERMINOLOGY RELATING TO THERMAL ANALYSIS AND RHEOLOGY
    ASTM D 5483 : 2005 : R2015 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 4565 : 2015 : REDLINE Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
    ASTM D 5483 : 1995 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 3350 : 2005 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    ASTM E 1858 : 2000 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective