ASTM D 3934 : 2014
|
Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus
|
ASTM E 337 : 2015
|
Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
|
ASTM E 100 : 2019
|
Standard Specification for ASTM Hydrometers
|
ASTM D 1608 : 2016
|
Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023)
|
ASTM D 3941 : 2014
|
Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
|
ASTM D 3685/D3685M : 2013
|
Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
|
ASTM D 1045 : 2014
|
Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
|
ASTM D 2111 : 2010 : R2015
|
Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
|
ASTM D 8175 : 2018
|
Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
|
ASTM D 1321 : 2016 : REV A
|
Standard Test Method for Needle Penetration of Petroleum Waxes
|
ASTM D 2746/D2746M : 2018
|
Standard Test Method for Staining Tendency of Asphalt (Stain Index)
|
ASTM D 5853 : 2017 : REV A
|
Standard Test Method for Pour Point of Crude Oils
|
ASTM D 3591 : 2017
|
Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
|
ASTM D 6331 : 2016
|
Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
|
ASTM D 1125 : 2014
|
Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023)
|
ASTM D 6288 : 2017
|
Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
|
ASTM E 1 : 2014
|
Standard Specification for ASTM Liquid-in-Glass Thermometers
|
ASTM D 1243 : 2015
|
Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
|
ASTM D 1601 : 2018
|
Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
|
ASTM F 390 : 2011
|
Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array (Withdrawn 2020)
|
ASTM D 5298 : 2016
|
Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
|
ASTM D 914 : 2012
|
Standard Test Methods for Ethylcellulose
|
ASTM D 1310 : 2014
|
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
|
ASTM D 5346 : 2017
|
Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
|
ASTM E 77 : 2014 : EDT 1
|
Standard Test Method for Inspection and Verification of Thermometers
|
ASTM D 4350 : 2016
|
Standard Test Method for Corrosivity Index of Plastics and Fillers
|
ASTM D 61 : 2015
|
Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
|
ASTM D 2158 : 2016 : REV A : EDT 1
|
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
|
ASTM D 5801 : 2017
|
Standard Test Method for Toughness and Tenacity of Asphalt Materials
|
ASTM D 972 : 2016
|
Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
|
ASTM G 42 : 2011 : R2019 : EDT 1
|
Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
|
ASTM D 6572 : 2013 : EDT 2
|
Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
|
ASTM D 1755 : 2015
|
Standard Specification for Poly(Vinyl Chloride) Resins
|
ASTM D 3195/D3195M : 2010 : R2015
|
Standard Practice for Rotameter Calibration
|
ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1
|
Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
|
ASTM D 4957 : 2018
|
Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
|
ASTM D 2726/D2726M : 2019
|
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
|
ASTM E 644 : 2011
|
Standard Test Methods for Testing Industrial Resistance Thermometers
|
ASTM C 1810/C1810M : 2019
|
Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
|
ASTM D 2913 : 2014
|
Standard Test Method for Mercaptan Content of the Atmosphere
|
ASTM D 3082 : 2015
|
Standard Test Method for Boron in Water (Withdrawn 2024)
|
ASTM D 113 : 2017
|
Standard Test Method for Ductility of Asphalt Materials
|
ASTM D 8055 : 2017
|
Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards
|
ASTM C 403/C403M : 2016
|
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
|
ASTM D 4603 : 2018
|
Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
|
ASTM D 3012 : 2019
|
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
|
ASTM D 4130 : 2015
|
Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines (Withdrawn 2024)
|
ASTM D 6927 : 2015
|
Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
|
ASTM D 1429 : 2013
|
Standard Test Methods for Specific Gravity of Water and Brine (Withdrawn 2022)
|
ASTM D 5015 : 2015
|
Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
|
ASTM F 483 : 2009 : R2014
|
Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
|
ASTM E 126 : 2019
|
Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
|
ASTM D 4532 : 2015
|
Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
|
ASTM D 6209 : 2013
|
Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
|
ASTM D 6926 : 2016
|
Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
|
ASTM D 4943 : 2018
|
Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
|
ASTM D 2251 : 2010 : R2015
|
Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
|
ASTM D 1795 : 2013
|
Standard Test Method for Intrinsic Viscosity of Cellulose
|
ASTM D 3154 : 2014
|
Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
|
ASTM D 2732 : 2014
|
Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film<brk/> and Sheeting
|
ASTM D 1074 : 2017
|
Standard Test Method for Compressive Strength of Asphalt Mixtures
|
ASTM D 5006 : 2011 : R2016
|
Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
|
ASTM D 4171 : 2016 : REV A
|
Standard Specification for Fuel System Icing Inhibitors
|
ASTM C 782 : 2013 : R2018
|
Standard Test Method for Softness of Preformed Tape Sealants
|
ASTM F 2105 : 2018
|
Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
|
ASTM D 6539 : 2013
|
Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022)
|
ASTM D 2914 : 2015
|
Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
|
ASTM D 4889 : 2015
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
|
ASTM D 6925 : 2015
|
Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
|
ASTM D 5/D5M : 2019
|
Standard Test Method for Penetration of Bituminous Materials
|
ASTM D 4878 : 2015
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
|
ASTM D 721 : 2017
|
Standard Test Method for Oil Content of Petroleum Waxes
|
ASTM D 7577 : 2012 : R2016
|
Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
|
ASTM D 5440 : 2017
|
Standard Test Method for Determining the Melting Point of Fats and Oils
|
ASTM D 6784 : 2016
|
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM D 1525 : 2017 : EDT 1
|
Standard Test Method for Vicat Softening Temperature of Plastics
|
ASTM D 6371 : 2017 : REV A
|
Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
|
ASTM C 359 : 2018
|
Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
|
ASTM D 5438 : 2017
|
Standard Practice for Collection of Floor Dust for Chemical Analysis
|
ASTM D 323 : 2015 : REV A
|
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
ASTM D 3642 : 2013
|
Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
|
ASTM D 2500 : 2017 : REV A
|
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
|
ASTM D 3603 : 2014
|
Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
|
ASTM D 4539 : 2017
|
Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
|