ASTM E 3152 : 2018

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Guide for Standard Test Methods and Practices Available for Determining Antifungal Activity on Natural or Synthetic Substrates Treated with Antimicrobial Agents

Available format(s):

Superseded date: 29-04-2023

Language(s):

Published date: 29-03-2018

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 11.08, 2018 Gives information on various test methods currently available to assess antifungal activity on natural or synthetic substrates.

Scope - (Show below) - (Hide below)

1.1This guide provides information on various test methods currently available to assess antifungal activity on natural or synthetic substrates.

1.2Knowledge of microbiological techniques is required for the practice of this guide.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Product Information - (Show below) - (Hide below)

Committee	E 35
Document Type	Guide
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM E 3152 : 2023

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM E 3227 : 2020	Standard Test Practice for Qualitative Assessment of Antifungal Activity on Textiles

Standards Referencing This Book - (Show below) - (Hide below)

ASTM E 1326 : 1998	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM F 1094 : 1987 : R2020	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method (Withdrawn 2023)
ASTM F 1094 : 1987 : R1999	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 6469 : 2004	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 1326 : 2015	Standard Guide for Evaluating Non-culture Microbiological Tests Used for Enumerating Bacteria
ASTM D 3456 : 2018	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 6974 : 2016	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM E 1326 : 2015-07	GUIDE FOR EVALUATING NON-CULTURE MICROBIOLOGICAL TESTS
ASTM D 4141/D4141M : 2022	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 7855/D7855M : 2013 : R2021	Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM E 1326 : 2015 : REV A	Standard Guide for Evaluating Non-culture Microbiological Tests
ASTM D 4576 : 2001	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 6974 : 2009 : R2013 : EDT 2	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 5259 : 2014	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM E 2471 : 2005	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM D 4576 : 2016 : R2021	Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
BS EN 1104:2005	Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents
ASTM D 3273 : 2000 : R2005	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3273 : 2012 : EDT 1	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3456 : 1986 : R1996	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 6329 : 1998 : R2008	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
AATCC TM 90 : 2011(R2016)	ANTIBACTERIAL ACTIVITY ASSESSMENT OF TEXTILE MATERIALS: AGAR PLATE METHOD
ASTM D 3273 : 2012	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 4141/D4141M : 2014 : REDLINE	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 4783 : 2001	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998 : R2003	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM E 2197 : 2002	Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides
ASTM G 21 : 2015 : REDLINE	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM E 1326 : 2006	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 6469 : 2012	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
MIL-STD-810 Revision G:2008	ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
ASTM D 3273 : 1986 : R1991 : EDT 1	Standard Test Method for Resistance to Growth of Moid on the Surface of Interior Coatings in an Enviormental Chamber
ASTM D 5259 : 1992 : R2000	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM D 2020 : 1992 : R2003	Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard (Withdrawn 2009)
ASTM C 1338 : 2000	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM F 1094 : 1987 : R2005	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 4445 : 2009	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 4300 : 2001 : R2013	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 7436 : 2012	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D 6469 : 2008	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4783 : 2001 : EDT 1	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6974 : 2009 : R2013	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 7910 : 2014	Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
ASTM D 5590 : 2000 : R2010 : EDT 1	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM E 1326 : 2008	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 4445 : 2010 : R2015	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM C 1338 : 2014	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 7855/D7855M : 2013 : R2017	Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM D 4445 : 1991 : R1996 : EDT 1	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ISO 846:1997	Plastics Evaluation of the action of microorganisms
ASTM D 5259 : 1992 : R2012	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM E 2722 : 2014	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media (Withdrawn 2022)
ASTM D 4445 : 2003	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 3456 : 1986 : R2008	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 4445 : 2009 : REV A	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 4300 : 2001	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 4783 : 1998 : REV A	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 5259 : 1992 : R2006	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM C 1338 : 2019	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 3456 : 1986 : R2002	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM C 1338 : 2008	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 4576 : 2008	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 7436 : 2017 : REDLINE	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D 6469 : 2014	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 2111 : 2012	Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
ASTM E 2471 : 2005 : R2011 : EDT 1	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM C 1338 : 2019 : R2022	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 3273 : 2021	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 4141/D4141M : 2014	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 4576 : 1986 : R1996	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 4300 : 1998 : REV A	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM E 2111 : 2000	Standard Quantitative Carrier Test Method To Evaluate the Bactericidal, Fungicidal, Mycobactericidal and Sporicidal Potencies of Liquid Chemical Germicides
ASTM D 7436 : 2017	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM E 2197 : 2017	Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
ISO 16256:2012	Clinical laboratory testing and in vitro diagnostic test systems Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
ASTM E 2471 : 2005 : R2016	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM D 5590 : 1994	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D 5590 : 2017 : R2021	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D 6974 : 2009 : R2013 : EDT 1	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 6974 : 2009	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
TAPPI T 487 : 0	FUNGUS RESISTANCE OF PAPER AND PAPERBOARD
ASTM D 4576 : 2001 : R2006 : EDT 1	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 3273 : 2000	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 4576 : 2016 : REDLINE	Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
ASTM D 4576 : 2016	Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
ASTM D 7910 : 2014 : R2021	Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
ASTM D 6974 : 2003	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels-Filtration and Culture Procedures
ASTM D 4576 : 2001 : R2006	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 4576 : 2008 : R2013	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 6974 : 2020	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 6469 : 2017	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 2722 : 2009	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media
ASTM D 4300 : 2001 : R2021 : EDT 1	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 6469 : 2011	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
AATCC TM 174 : 2011(R2016)e	ANTIMICROBIAL ACTIVITY ASSESSMENT OF NEW CARPETS
ASTM D 4300 : 2001 : R2008	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 6469 : 1999	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4783 : 2001 : R2013	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998 : R2023	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM D 4783 : 2001 : R2021	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998 : R2015	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
BS EN 113:1997	Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values
ASTM E 2197 : 2017 : EDT 1	Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
ASTM E 2722 : 2014 : REDLINE	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media
ASTM D 7436 : 2011	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D 6974 : 2016 : REDLINE	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 3456 : 1986 : R2012	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 2020 : 1992 : R1999	Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
ASTM D 5590 : 2000	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM G 21 : 2015	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM D 6469 : 2008 : EDT 1	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 2111 : 2005	Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemical Microbicides
ASTM F 1094 : 1987 : R2012	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 6974 : 2004	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 4445 : 2010	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 3273 : 2016	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 6469 : 2017 : REDLINE	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 5590 : 2000 : R2010	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM G 21 : 2015 : R2021 : EDT 1	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM E 2197 : 2011	Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides
ASTM D 3273 : 2016 : REDLINE	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 5590 : 2017	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D 4783 : 2001 : R2008	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM D 4445 : 2010 : R2019	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM E 2111 : 2012 : R2018	Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
BS 3900-G6:1989	Methods of test for paints Assessment of resistance to fungal growth
ASTM D 5259 : 2019	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM E 1326 : 2013	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 5590 : 2000 : R2005	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Committee	E 35
Document Type	Guide
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM E 3152 : 2023

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM E 3227 : 2020	Standard Test Practice for Qualitative Assessment of Antifungal Activity on Textiles

Standards Referencing This Book - (Show below) - (Hide below)

ASTM E 1326 : 1998	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM F 1094 : 1987 : R2020	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method (Withdrawn 2023)
ASTM F 1094 : 1987 : R1999	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 6469 : 2004	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 1326 : 2015	Standard Guide for Evaluating Non-culture Microbiological Tests Used for Enumerating Bacteria
ASTM D 3456 : 2018	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 6974 : 2016	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM E 1326 : 2015-07	GUIDE FOR EVALUATING NON-CULTURE MICROBIOLOGICAL TESTS
ASTM D 4141/D4141M : 2022	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 7855/D7855M : 2013 : R2021	Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM E 1326 : 2015 : REV A	Standard Guide for Evaluating Non-culture Microbiological Tests
ASTM D 4576 : 2001	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 6974 : 2009 : R2013 : EDT 2	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 5259 : 2014	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM E 2471 : 2005	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM D 4576 : 2016 : R2021	Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
BS EN 1104:2005	Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents
ASTM D 3273 : 2000 : R2005	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3273 : 2012 : EDT 1	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3456 : 1986 : R1996	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 6329 : 1998 : R2008	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
AATCC TM 90 : 2011(R2016)	ANTIBACTERIAL ACTIVITY ASSESSMENT OF TEXTILE MATERIALS: AGAR PLATE METHOD
ASTM D 3273 : 2012	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 4141/D4141M : 2014 : REDLINE	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 4783 : 2001	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998 : R2003	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM E 2197 : 2002	Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides
ASTM G 21 : 2015 : REDLINE	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM E 1326 : 2006	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 6469 : 2012	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
MIL-STD-810 Revision G:2008	ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
ASTM D 3273 : 1986 : R1991 : EDT 1	Standard Test Method for Resistance to Growth of Moid on the Surface of Interior Coatings in an Enviormental Chamber
ASTM D 5259 : 1992 : R2000	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM D 2020 : 1992 : R2003	Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard (Withdrawn 2009)
ASTM C 1338 : 2000	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM F 1094 : 1987 : R2005	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 4445 : 2009	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 4300 : 2001 : R2013	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 7436 : 2012	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D 6469 : 2008	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4783 : 2001 : EDT 1	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6974 : 2009 : R2013	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 7910 : 2014	Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
ASTM D 5590 : 2000 : R2010 : EDT 1	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM E 1326 : 2008	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 4445 : 2010 : R2015	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM C 1338 : 2014	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 7855/D7855M : 2013 : R2017	Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM D 4445 : 1991 : R1996 : EDT 1	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ISO 846:1997	Plastics Evaluation of the action of microorganisms
ASTM D 5259 : 1992 : R2012	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM E 2722 : 2014	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media (Withdrawn 2022)
ASTM D 4445 : 2003	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 3456 : 1986 : R2008	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 4445 : 2009 : REV A	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 4300 : 2001	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 4783 : 1998 : REV A	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 5259 : 1992 : R2006	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM C 1338 : 2019	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 3456 : 1986 : R2002	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM C 1338 : 2008	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 4576 : 2008	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 7436 : 2017 : REDLINE	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D 6469 : 2014	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 2111 : 2012	Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
ASTM E 2471 : 2005 : R2011 : EDT 1	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM C 1338 : 2019 : R2022	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 3273 : 2021	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 4141/D4141M : 2014	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 4576 : 1986 : R1996	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 4300 : 1998 : REV A	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM E 2111 : 2000	Standard Quantitative Carrier Test Method To Evaluate the Bactericidal, Fungicidal, Mycobactericidal and Sporicidal Potencies of Liquid Chemical Germicides
ASTM D 7436 : 2017	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM E 2197 : 2017	Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
ISO 16256:2012	Clinical laboratory testing and in vitro diagnostic test systems Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
ASTM E 2471 : 2005 : R2016	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM D 5590 : 1994	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D 5590 : 2017 : R2021	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D 6974 : 2009 : R2013 : EDT 1	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 6974 : 2009	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
TAPPI T 487 : 0	FUNGUS RESISTANCE OF PAPER AND PAPERBOARD
ASTM D 4576 : 2001 : R2006 : EDT 1	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 3273 : 2000	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 4576 : 2016 : REDLINE	Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
ASTM D 4576 : 2016	Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
ASTM D 7910 : 2014 : R2021	Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
ASTM D 6974 : 2003	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels-Filtration and Culture Procedures
ASTM D 4576 : 2001 : R2006	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 4576 : 2008 : R2013	Standard Test Method for Mold Growth Resistance of Wet Blue
ASTM D 6974 : 2020	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 6469 : 2017	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 2722 : 2009	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media
ASTM D 4300 : 2001 : R2021 : EDT 1	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 6469 : 2011	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
AATCC TM 174 : 2011(R2016)e	ANTIMICROBIAL ACTIVITY ASSESSMENT OF NEW CARPETS
ASTM D 4300 : 2001 : R2008	Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 6469 : 1999	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4783 : 2001 : R2013	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998 : R2023	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM D 4783 : 2001 : R2021	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998 : R2015	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
BS EN 113:1997	Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values
ASTM E 2197 : 2017 : EDT 1	Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
ASTM E 2722 : 2014 : REDLINE	Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media
ASTM D 7436 : 2011	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D 6974 : 2016 : REDLINE	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 3456 : 1986 : R2012	Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D 2020 : 1992 : R1999	Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
ASTM D 5590 : 2000	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM G 21 : 2015	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM D 6469 : 2008 : EDT 1	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 2111 : 2005	Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemical Microbicides
ASTM F 1094 : 1987 : R2012	Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM D 6974 : 2004	Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 4445 : 2010	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D 3273 : 2016	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 6469 : 2017 : REDLINE	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 5590 : 2000 : R2010	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM G 21 : 2015 : R2021 : EDT 1	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM E 2197 : 2011	Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides
ASTM D 3273 : 2016 : REDLINE	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 5590 : 2017	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D 4783 : 2001 : R2008	Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6329 : 1998	Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM D 4445 : 2010 : R2019	Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM E 2111 : 2012 : R2018	Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
BS 3900-G6:1989	Methods of test for paints Assessment of resistance to fungal growth
ASTM D 5259 : 2019	Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
ASTM E 1326 : 2013	Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM D 5590 : 2000 : R2005	Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM E 3152 : 2018

Add To Cart

Access your standards online with a subscription