ASTM E 345 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods of Tension Testing of Metallic Foil
09-02-2024
English
11-08-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.01, 2016 Defines the tension testing of metallic foil at room temperature.
| Committee |
E 28
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1These test methods cover the tension testing of metallic foil at room temperature. Exception to these methods may be necessary in individual specifications or test methods for a particular material.
1.2Units—The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM A 880 : 1995 | Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
| ASTM B 557 : 2015 : REDLINE | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| SAE MAM 5914 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
| SAE AMS 4300 : 2017 | BORON-ALUMINUM COMPOSITE SHEET, 50 V/O 5.6B, 6061-0, FOR DIFFUSION BONDING |
| SAE AMS 4009 : 2017 | ALUMINUM ALLOY FOIL 1.0MG - 0.6SI - 0.30CU - 0.20CR (6061-0) ANNEALED |
| ASTM B 479 : 2006 | Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications (Withdrawn 2015) |
| MIL-PRF-31032-6 Revision B:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE SIDED, THERMOPLASTIC RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| MIL-PRF-31032-5 Revision B:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| ASTM E 796 : 1994 | Standard Test Method for Ductility Testing of Metallic Foil |
| SAE AMS 5914 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
| ASTM E 8M : 2004 | Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008) |
| ASTM B 479 : 2019 | Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications |
| SAE AMS 4004 : 2015 | ALUMINUM ALLOY, FOIL, 2.5MG - 0.25CR (5052-H191), STRAIN HARDENED |
| SAE AMS A 81596 : 2018 | ALUMINUM FOIL FOR SANDWICH CONSTRUCTION |
| ASTM E 796 : 1994 : R2000 | Standard Test Method for Ductility Testing of Metallic Foil (Withdrawn 2009) |
| ASTM B 451 : 1993 | Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998) |
| IPC AM 372 : 1978 | ELECTROLESS COPPER FILM FOR ADDITIVE PRINTED BOARDS, |
| SAE AMS 4011 : 2014 | ALUMINUM, FOIL AND LIGHT GAGE SHEET, 99.45 AL (1145-0) ANNEALED |
| ASTM B 557M : 2015 : REDLINE | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| MIL A 81596 : A | ALUMINUM FOIL FOR SANDWICH CONSTRUCTION |
| SAE AMS 5537 : 2017 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL, AND PLATE, 52CO - 20CR - 10NI - 15W, SOLUTION HEAT TREATED |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
| ASTM B 386 : 2003 : R2011 | Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil |
| ASTM B 386 : 2003 | Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil |
| ASTM E 2309 : 2005 | Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines |
| ASTM B 193 : 2016 : REDLINE | Standard Test Method for Resistivity of Electrical Conductor Materials |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.