ASTM E 84 : 2022
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Surface Burning Characteristics of Building Materials
Hardcopy , PDF
14-06-2023
English
23-06-2022
Committee |
E 05
|
DocumentType |
Test Method
|
Pages |
27
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This fire-test-response standard for the comparative surface burning behavior of building materials is applicable to exposed surfaces such as walls and ceilings. The test is conducted with the specimen in the ceiling position with the surface to be evaluated exposed face down to the ignition source. The material, product, or assembly shall be capable of being mounted in the test position during the test. Thus, the specimen shall either be self-supporting by its own structural quality, held in place by added supports along the test surface, or secured from the back side.
1.2Test Method E84 is a 10-min fire-test response method. The following standards address testing of materials in accordance with test methods that are applications or variations of the test method or apparatus used for Test Method E84:
1.2.1Materials required by the user to meet an extended 30-min duration tunnel test shall be tested in accordance with Test Method E2768.
1.2.2Wires and cables for use in air-handling spaces shall be tested in accordance with NFPA 262.
1.2.3Pneumatic tubing for control systems shall be tested in accordance with UL 1820.
1.2.4Combustible sprinkler piping shall be tested in accordance with UL 1887.
1.2.5Optical fiber and communications raceways for use in air handling spaces shall be tested in accordance with UL 2024.
1.3The purpose of this test method is to determine the relative burning behavior of the material by observing the flame spread along the specimen. Flame spread and smoke developed index are reported. However, there is not necessarily a relationship between these two measurements.
1.4The use of supporting materials on the underside of the test specimen has the ability to lower the flame spread index from those which might be obtained if the specimen could be tested without such support. These test results do not necessarily relate to indices obtained by testing materials without such support.
1.5Testing of materials that melt, drip, or delaminate to such a degree that the continuity of the flame front is destroyed, results in low flame spread indices that do not relate directly to indices obtained by testing materials that remain in place.
1.6The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.7The text of this standard references notes and footnotes that provide explanatory information. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of the standard.
1.8This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions.
1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.10Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
1.11This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1289 : 2022 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM D 3730 : 2017 : R2022 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM E 2634 : 2018 : R2022 | Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems |
ASTM C 1224 : 2022 | Standard Specification for Reflective Insulation for Building Applications |
ASTM E 970 : 2017 : EDT 1 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
ASTM C 1902 : 2022 : REV A | Standard Specification for Cellular Glass Insulation Used in Building and Roof Applications |
ASTM E 1042 : 2022 | Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
ASTM C 547 : 2022 : REV A | Standard Specification for Mineral Fiber Pipe Insulation |
ASTM E 2067 : 2022 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
ASTM E 136 : 2022 | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
ASTM C 578 : 2022 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
ASTM E 1623 : 2022 : REV A | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
ASTM C 1325 : 2022 | Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units |
ASTM C 1841 : 2022 | Standard Specification for Interior Radiation Control Coating (IRCC) for Building Applications |
ASTM C 126 : 2022 | Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units |
ASTM C 1728 : 2022 | Standard Specification for Flexible Aerogel Insulation |
ASTM E 3157 : 2022 | Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems |
ASTM D 8350 : 2022 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine |
ASTM D 5319 : 2022 | Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
ASTM D 635 : 2022 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
ASTM E 2404 : 2022 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
ASTM C 1483/C1483M : 2017 : R2022 | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
ASTM C 1534 : 2022 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
ASTM C 591 : 2022 | Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation |
ASTM C 1186 : 2022 | Standard Specification for Flat Fiber-Cement Sheets |
ASTM E 761/E761M : 1992 : R2020 | Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members |
ASTM F 2970 : 2022 | Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts |
ASTM E 2257 : 2022 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
ASTM E 1740 : 2022 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
ASTM E 2785 : 2014 : R2022 | Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions |
ASTM E 1537 : 2022 | Standard Test Method for Fire Testing of Upholstered Furniture |
ASTM D 7568 : 2017 | Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications |
ASTM C 1149 : 2017 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
ASTM E 2307 : 2020 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
ASTM F 793/F793M : 2020 | Standard Classification of Wall Coverings by Use Characteristics |
ASTM D 7032 : 2021 | Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
ASTM D 5516 : 2018 | Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures |
ASTM E 2690 : 2017 : REV B | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
ASTM C 1534 : 2020 : REV A | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
ASTM C 1410 : 2017 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
ASTM C 1290 : 2016 : R2021 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
ASTM C 1766 : 2015(R2019) | Standard Specification for Factory-Laminated Gypsum Panel Products |
ASTM C 1321 : 2015 : R2020 | Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction |
ASTM D 5144 : 2008 : R2021 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
ASTM C 1355/C1355M : 1996 : R2020 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
ASTM E 1317 : 2019 | Standard Test Method for Flammability of Surface Finishes |
ASTM E 1321 : 2018 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
ASTM C 647 : 2019 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
ASTM D 3201/D3201M : 2020 | Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products |
ASTM E 136 : 2019 : REV A | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C |
ASTM E 859/E859M : 1993 : R2020 | Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members |
ASTM E 2768 : 2011 : R2018 | Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) |
ASTM D 8350 : 2021 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine |
ASTM C 549 : 2018 | Standard Specification for Perlite Loose Fill Insulation |
ASTM E 760/E760M : 1992 : R2020 | Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members |
ASTM E 2568 : 2017 : REV A | Standard Specification for PB Exterior Insulation and Finish Systems |
ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
ASTM D 7793 : 2021 | Standard Specification for Insulated Vinyl Siding |
ASTM D 5424 : 2018 | Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
ASTM D 2843 : 2022 | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
ASTM E 1494 : 2018 | Standard Practice for Testing Physical Properties of Friable Surfacing Materials |
ASTM E 800 : 2020 | Standard Guide for Measurement of Gases Present or Generated During Fires |
ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
ASTM C 1822 : 2021 | Standard Specification for Insulating Covers on Accessible Lavatory Piping |
ASTM C 1405 : 2022 | Standard Specification for Glazed Brick (Single Fired, Brick Units) |
ASTM E 1966 : 2015 : R2019 | Standard Test Method for Fire-Resistive Joint Systems |
ASTM E 176 : 2021 : REV A | Standard Terminology of Fire Standards |
ASTM D 635 : 2018 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
ASTM C 1676/C1676M : 2019 | Standard Specification for Microporous Thermal Insulation |
ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM C 1482 : 2017 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
ASTM C 1126 : 2019 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
ASTM F 3214 : 2018 | Standard Practice for Characterization of Fire Properties of Materials Specified for Vehicles Associated with Amusement Rides and Devices |
ASTM E 1590 : 2022 | Standard Test Method for Fire Testing of Mattresses |
ASTM C 610 : 2017 | Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation |
ASTM D 8104 : 2017 | Standard Guide for Determining Coating Qualification Test Data Applicability |
ASTM E 2925 : 2019 : REV A | Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function |
ASTM D 7031 : 2011 : R2019 | Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
ASTM C 547 : 2022 | Standard Specification for Mineral Fiber Pipe Insulation |
ASTM C 1767 : 2021 | Standard Specification for Stainless Steel Jacketing for Insulation |
ASTM E 1995 : 2021 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
ASTM E 1822 : 2021 | Standard Test Method for Fire Testing of Stacked Chairs |
ASTM D 5364 : 2014 : R2019 | Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units |
ASTM C 728 : 2017 : REV A : R2022 | Standard Specification for Perlite Thermal Insulation Board |
ASTM E 2231 : 2021 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 736/E736M : 2019 | Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
ASTM C 1014 : 2017 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
ASTM C 1728 : 2021 | Standard Specification for Flexible Aerogel Insulation |
ASTM C1620 EDT 1 : 2016 | Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
ASTM E 1795 : 2020 : REV A | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM C 1705/C1705M : 2009 : R2016 | Standard Specification for Structural Cementitious Panels |
ASTM E 2513 : 2007 : R2019 : EDT 1 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
ASTM E 2573 : 2019 | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
ASTM C 126 : 2019 | Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units |
ASTM E 2837 : 2013 : R2017 | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
ASTM E 3134 : 2020 | Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems |
ASTM D 7258 : 2017 | Standard Specification for Polymeric Piles |
ASTM D 7745 : 2019 | Standard Practice for Testing Pultruded Composites |
ASTM C 612 : 2014(R2019) | Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
ASTM E 759/E759M : 1992 : R2020 | Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members |
ASTM C 991 : 2016 | Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings |
ASTM E 162 : 2021 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
ASTM C 552 : 2022 | Standard Specification for Cellular Glass Thermal Insulation |
ASTM D 5319 : 2017 | Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
ASTM C 11 : 2018 : REV B | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
ASTM E 3287 : 2021 | Practice for Specimen Preparation of Fenestration Profiles Intended to Support Non-Combustible In-Fill Materials to Assess Surface Burning Characteristics |
ASTM C 665 : 2017 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
ASTM D 3841 : 2021 | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
ASTM C 1852 : 2020 | Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives |
ASTM D 3730 : 2017 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM C 1767M : 2021 | Standard Specification for Stainless Steel Jacketing for Insulation |
ASTM C 1423 : 2021 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
ASTM C 1136 : 2021 | Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation |
ASTM C 516 : 2019 | Standard Specification for Vermiculite Loose Fill Thermal Insulation |
ASTM D 5664 : 2017 | Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
ASTM C 1313/C1313M : 2013 : R2019 | Standard Specification for Sheet Radiant Barriers for Building Construction Applications |
ASTM C 744 : 2021 | Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
ASTM D 7857 : 2016 | Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures |
ASTM C 1071 : 2019 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
ASTM C 533 : 2017 | Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation |
ASTM E 861 : 2013 : R2021 | Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors |
ASTM C 1427 : 2021 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
ASTM E 3157 : 2020 | Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems |
ASTM C 1288 : 2017 | Standard Specification for Fiber-Cement Interior Substrate Sheets |
ASTM E 2404 : 2017 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
ASTM E 2989 : 2019 : REV A | Standard Guide for Assessment of Continued Applicability of Reaction to Fire Test Reports Used in Building Regulation |
ASTM C 1902 : 2022 | Standard Specification for Cellular Glass Insulation Used in Building and Roof Applications |
ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM F 3059 : 2018 | Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding |
ASTM C 726 : 2017 | Standard Specification for Mineral Wool Roof Insulation Board |
ASTM E 2336 : 2020 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
ASTM D 7254 : 2021 | Standard Specification for Polypropylene (PP) Siding |
ASTM C 1289 : 2022 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1594 : 2011 : R2017 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
ASTM E 2536 : 2021 | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
ASTM D 8157 : 2019 | Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants |
ASTM C 1825 : 2019 | Standard Guide for Developing Specifications for Masonry Units |
ASTM E 2688 : 2018 | Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics |
ASTM C 1396/C1396M : 2017 | Standard Specification for Gypsum Board |
ASTM C 1729M : 2021 | Standard Specification for Aluminum Jacketing for Insulation |
ASTM C 578 : 2019 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
ASTM C 1483/C1483M : 2017 | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
ASTM C 209 : 2020 | Standard Test Methods for Cellulosic Fiber Insulating Board |
ASTM D 3675 : 2022 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 2599 : 2018 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
ASTM D 6662 : 2022 | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
ASTM E 605/E605M : 2019 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
ASTM D 7445 : 2018 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
ASTM C 1668 : 2020 | Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems |
ASTM C 1685 : 2015 : R2021 | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
ASTM C 1029 : 2020 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
ASTM C 1224 : 2015 : R2020 | Standard Specification for Reflective Insulation for Building Applications |
ASTM C 1696 : 2020 | Standard Guide for Industrial Thermal Insulation Systems |
ASTM F 3319 : 2020 | Standard Specification for Selection and Application of Field-Installed Cryogenic Pipe and Equipment Insulation Systems on Liquefied Natural Gas (LNG)-Fueled Ships |
ASTM C 534/C534M : 2020 : REV A | Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form |
ASTM E 970 : 2017 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
ASTM D 5537 : 2018 | Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
ASTM E 3020 : 2022 | Standard Practice for Ignition Sources |
ASTM E 1264 : 2022 | Standard Classification for Acoustical Ceiling Products |
ASTM E 154/E154M : 2008 : REV A : R2019 | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
ASTM D 3806 : 2019 : REV A | Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
ASTM E 1042 : 2002 : R2021 | Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
ASTM C 582 : 2009 : R2016 | Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment |
ASTM D 2898 : 2010 : R2017 | Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing |
ASTM C 1729 : 2021 | Standard Specification for Aluminum Jacketing for Insulation |
ASTM E 2726/E2726M : 2012 : REV A : R2017 | Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands |
ASTM E 2579 : 2021 | Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics |
ASTM E 298 : 2017 | Standard Test Methods for Assay of Organic Peroxides |
ASTM C 1320 : 2020 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
ASTM F 2021 : 2017 : R2022 | Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems |
ASTM C 1325 : 2021 | Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units |
ASTM E 2634 : 2018 | Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems |
ASTM C 553 : 2013 : R2019 | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
ASTM C 591 : 2021 | Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation |
ASTM C 592 : 2022 : REV A | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
ASTM C 1278/C1278M : 2017 | Standard Specification for Fiber-Reinforced Gypsum Panel |
ASTM F 2154 : 2013 : R2019 | Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
ASTM E 2067 : 2020 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
ASTM C 1393 : 2019 | Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks |
ASTM E 1623 : 2022 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
ASTM E 162 : 2021 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
ASTM E 3202 : 2019 : EDT 1 | Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics |
ASTM E 69 : 2015 | Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus |
ASTM E 176 : 2021 : REV A : EDT 1 | Standard Terminology of Fire Standards |
ASTM E 2988 : 2017 | Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics |
ASTM E 3287 : 2021 | Practice for Specimen Preparation of Fenestration Profiles Intended to Support Non-Combustible In-Fill Materials to Assess Surface Burning Characteristics |
ASTM E 2690 : 2022 | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
ASTM E 2988 : 2017 : R2022 | Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics |
ASTM E 69 : 2022 | Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus |
ASTM E 2690 : 2017 : REV B | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
ASTM E 2404 : 2022 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
ASTM E 2599 : 2018 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
ASTM E 176 : 2021 : REV A | Standard Terminology of Fire Standards |
ASTM E 2599 : 2022 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
ASTM E 162 : 2022 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.