ASTM D 3139 : 1998 : R2011
|
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
ASTM F 1987 : 2001
|
Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems |
ASTM D 3517 : 2014 : REDLINE
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
ASTM D 3262 : 2016 : REDLINE
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
ASTM F 1901 : 2016 : REDLINE
|
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
ASTM F 794:2003
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
ASTM F 794 : 2003 : R2014
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
ASTM D 3754 : 2014 : REDLINE
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
ASTM D 6783 : 2005
|
Standard Specification for Polymer Concrete Pipe |
ASTM F 2881 : 2011
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
ASTM F 2946 : 2012 : R2017
|
Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
ASTM F 2881 : 2011 : R2015
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
ASTM D 3212 : 2007 : R2013
|
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
ASTM F 892 : 1995
|
Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001) |
ASTM F 2737 : 2011 : R2017
|
Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units |
ASTM F 2762 : 2011 : EDT 1
|
Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Withdrawn 2016) |
ASTM F 2947 : 2012
|
Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
ASTM F 2763 : 2016 : REDLINE
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
ASTM F 1759 : 1997 : R2004
|
Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications |
ASTM F 3058 : 2016
|
Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines |
ASTM D 2680 : 2001 : R2014
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
ASTM D 3139 : 1998 : R2005
|
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
ASTM F 1986 : 2001 : R2011
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) |
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009
|
2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
AWWA M45 : 3
|
FIBERGLASS PIPE DESIGN |
ASTM F 1759 : 1997 : R2010
|
Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications |
AWWA C908 : 2001
|
PVC SELF-TAPPING SADDLE TEES FOR USE ON PVC PIPE |
ASTM F 679 : 2016 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
FM 1614 : 2017
|
FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
AASHTO M 304 : 2011 : R2015
|
SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PROFILE WALL DRAIN PIPE AND FITTINGS BASED ON CONTROLLED INSIDE DIAMETER |
ASTM F 1668 : 2016 : REDLINE
|
Standard Guide for Construction Procedures for Buried Plastic Pipe |
ASTM F 1336 : 2015 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
ASTM D 3212 : 2007
|
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
ASTM F 3219 : 2017
|
Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings |
ASTM D 2680 : 2001
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
ASTM F 2510/F2510M : 2017 : REDLINE
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes |
ASTM F 2737 : 2011
|
Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units |
ASTM F 2762 : 2011
|
Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
ASTM F 949 : 2015 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
ASTM F 2562/F2562M : 2015 : REDLINE
|
Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
AASHTO M 326 : 2008
|
SPECIFICATION FOR POLYETHYLENE (PE) LINER PIPE, 300- TO 1600-MM DIAMETER, BASED ON CONTROLLED OUTSIDE DIAMETER |
AASHTO M 278 : 2015
|
SPECIFICATION FOR CLASS PS46 POLY(VINYL CHLORIDE) (PVC) PIPE |
ASTM D 2751 : 2005
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) |
ICC 2012 INT. PVT. SEWAGE DISP.CODE : 2012
|
INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE |
ASTM F 2768 : 2009
|
Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components (Withdrawn 2016) |
AWWA C900 : 2016
|
POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
AASHTO MP 20 : 2013
|
SPECIFICATION FOR STEEL-REINFORCED POLYETHYLENE (PE) RIBBED PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER |
ASTM F 2947 : 2012 : EDT 1
|
Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
ASTM F 1483 : 2017 : REDLINE
|
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
CSA B137 COMPENDIUM : 2017
|
THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
AWWA C905 : 2010
|
POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 14 IN. THROUGH 48 IN. (350 MM THROUGH 1,200 MM), FOR WATER TRANSMISSION AND DISTRIBUTION |
ASTM F 1759 : 1997 : R2018
|
Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications |
ASTM F 2946 :2012
|
Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
ASTM F 1760 : 2016 : REDLINE
|
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
ASTM D 6783 : 2005 : REV A : R2017
|
Standard Specification for Polymer Concrete Pipe |
ICC IPC CODE & COMMENTARY : 2015
|
IPC® Code and Commentary |
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015
|
IRC® Code and Commentary, Volume 2 |
ICC 2012 INTERNATIONAL RESI. CODE : 2012
|
INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012
|
INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
ANSI/AWWA C950:2013
|
FIBERGLASS PRESSURE PIPE |
ASTM D 2680 : 2001 : R2009
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
ASTM D 3840 : 2014 : REDLINE
|
SPECIFICATION FOR 'FIBERGLASS' (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE FITTINGS FOR NONPRESSURE APPLICATIONS |
DWA-M 143-20:2018
|
TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
AASHTO PP 63 : 2009 : R2014
|
PRACTICE FOR PIPE JOINT SELECTION FOR HIGHWAY CULVERT AND STORM DRAINS |
AASHTO MP 20 : 2013 : R2014
|
SPECIFICATION FOR STEEL-REINFORCED POLYETHYLENE (PE) RIBBED PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER |
AWWA C907 : 2017
|
INJECTION-MOLDED POLYVINYL CHLORIDE (PVC) PRESSURE FITTINGS, 4 IN. THROUGH 12 IN. (100 MM THROUGH 300 MM), FOR WATER, WASTEWATER, AND RECLAIMED WATER SERVICE |
R 82 : 2017
|
PRACTICE FOR PIPE JOINT SELECTION FOR HIGHWAY CULVERT AND STORM DRAINS |
ASTM F 2307 : 2003
|
Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011) |
ASTM D3139 : 1998
|
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
FM 1612 : 2016
|
POLYVINYL CHLORIDE (PVC) PIPE AND FITTING FOR UNDERGROUND FIRE PROTECTION SERVICE |
ASTM F 1987 : 2001 : R2011
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020) |
GOST 849:2018
|
Primary nickel. SpecificationsE |
AWWA M23 : 2
|
PVC PIPE - DESIGN AND INSTALLATION |
ASTM F 1803 : 2015
|
Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter |
ASTM F 1866 : 2018 : REDLINE
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings |
ASTM F 1986 : 2001 : R2006
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
ICC IPSDC INTERNATIONAL PVT. SEWAGE DISPOSAL CODE : 2015
|
INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE |
AASHTO M 304 : 2011
|
SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PROFILE WALL DRAIN PIPE AND FITTINGS BASED ON CONTROLLED INSIDE DIAMETER |
ASTM F 1759 : 1997
|
Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications |
ASAE S376.1 : 1992
|
DESIGN, INSTALLATION AND PERFORMANCE OF UNDERGROUND, THERMOPLASTIC IRRIGATION PIPELINES |
AASHTO M 294 : 2015
|
SPECIFICATION FOR CORRUGATED POLYETHYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER |
NSF 14 : 2016
|
PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
ASTM D 6783 : 2005 : R2011
|
Standard Specification for Polymer Concrete Pipe |
ASTM F 1986 : 2001
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
ASTM F 1987 : 2001 : R2006
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems |
ASTM F 2881/F2881M : 2018
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
ASTM F 2435 : 2015 : REDLINE
|
Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe |
ASTM F 891 : 2016 : REDLINE
|
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
ASTM F 2947/F2947M : 2014-03
|
SPECIFICATION FOR 150 TO 1500 MM [6 TO 60 IN.] ANNULAR CORRUGATED PROFILE-WALL POLYETHYLENE (PE) PIPE AND FITTINGS FOR SANITARY SEWER APPLICATIONS |
ASTM A 1107/A1107M : 2017
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes |
ASTM F 794 : 2003 : R2009
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
ASME A112.4.4 : 2017
|
PLASTIC PUSH-FIT DRAIN, WASTE, AND VENT (DWV) FITTINGS |