ASTM G 7 : 2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-01-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 14.04, 2009 Guidelines for testing for atmospheric environmental exposure of non-metallic materials to the environment.
| Committee |
G 03
|
| DocumentType |
Standard Practice
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice covers procedures to be followed for direct exposure of nonmetallic materials to the environment. When originators of a weathering test have the actual exposure conducted by a separate agency, the specific conditions for the exposure of test and control specimens should be clearly defined and mutually agreed upon between all parties.
1.2 For exposures behind glass, refer to Practice G 24.
1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.
1.4 This practice is technically equivalent to the parts of ISO 877 that describe direct exposures of specimens to the environment.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6675 : 2001 : R2015 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| DIN EN ISO 877-1:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| PD ISO/TR 18930:2001 | Imaging materials. Protocols for outdoor weathering experiments |
| ASTM D 6675 : 2001 : R2011 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| UNE-EN ISO 877-1:2011 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| ASTM D 3903 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| 07/30155372 DC : 0 | BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| ASTM G 24 : 2013 : REDLINE | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
| ASTM D 7376 : 2010 | Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
| ASTM D 3274 : 2009 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 7893 : 2013 | Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products |
| ASTM D 1006/D1006M : 2013 : REDLINE | Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood |
| ASTM D 7376 : 2010 : REV A : R2016 | Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
| ASTM E 881 : 1992 : R2003 | Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode |
| NACE RP 02 81 : 2004 | METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES |
| ASTM D 6675 : 2001 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| BS ISO 18930:2011 | Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions |
| SAE AMS P 21600 : 2013 | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
| 07/30127278 DC : 0 | BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD |
| ASTM D 3424 : 2011 : REDLINE | Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
| UNI EN ISO 877-1 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| BS ISO 9370:2017 | Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method |
| ASTM D 4141/D4141M : 2014 : REDLINE | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM G 141 : 2009 | Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials |
| ASTM G 178 : 2016 : REDLINE | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
| ASTM E 782 : 1995 : R2001 | Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode |
| ASTM E 881 : 1992 : R1996 | Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode |
| DIN EN ISO 877-1:2011-03 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| 10/30215313 DC : 0 | BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS |
| ASTM D 3771 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| I.S. EN ISO 877-1:2010 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| ASTM D 3274 : 2009 : R2017 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 5272 : 2008 : R2013 | Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics |
| ASTM E 782 : 1995 : R2015 | Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode |
| ASTM D 5272 : 2008 | Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics |
| ASTM D 4364 : 2013 : REDLINE | Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight |
| ASTM G 156 : 2017 : REDLINE | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
| ASTM E 1596 : 1999 | Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules (Withdrawn 2008) |
| ASTM E 881 : 1992 : R2015 | Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode |
| NASA STD 6012 : 2012 | CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
| ASTM G 141 : 2009 : R2013 | Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials |
| ASTM G 179 : 2004 | Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests |
| 16/30328596 DC : 0 | BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD |
| ASTM D 2485 : 2018 : REDLINE | Standard Test Methods for Evaluating Coatings For High Temperature Service |
| ASTM D 1435 : 2013 : REDLINE | Standard Practice for Outdoor Weathering of Plastics |
| ASTM D 7376 : 2010 : REV A | Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
| ASTM G 179 : 2004 : R2011 | Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests |
| ASTM E 782 : 1995 : R2007 | Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode |
| BS EN ISO 877-1:2010 | Plastics. Methods of exposure to solar radiation General guidance |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| ISO 18930:2011 | Imaging materials Pictorial colour reflection prints Methods for evaluating image stability under outdoor conditions |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| ISO/TR 18930:2001 | Imaging materials Protocols for outdoor weathering experiments |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ISO 877-1:2009 | Plastics — Methods of exposure to solar radiation — Part 1: General guidance |
| EN ISO 877-1:2010 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| ASTM D 3274 : 2009 : R2013 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 6675 : 2001 : R2006 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM E 782 : 1995 | Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode |
| ASTM E 881 : 1992 : R2009 | Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode |
| ASTM D 3274 : 2009 : EDT 1 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM G 183 : 2015 : REDLINE | Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers |
| ASTM G 90 : 2017 : REDLINE | Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight |
| ASTM G 201 : 2016 : REDLINE | Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation |
| ASTM D 3667 : 2016 : REDLINE | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM D 1641 : 2004 | Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013) |
| ASTM C 1589/C1589M : 2018 : REDLINE | Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
| ASTM E 824 : 2011-01 | TEST METHOD FOR TRANSFER OF CALIBRATION FROM REFERENCE TO FIELD RADIOMETERS |
| ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| ASTM G 130 : 2012 : REDLINE | Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| ASTM G 24 : 2013 : REDLINE | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.