• Shopping Cart
    There are no items in your cart

ASTM U 09 : 2013

Current

Current

The latest, up-to-date edition.

Precision Statements in UOP Methods

Published date

01-12-2013

Sorry this product is not available in your region.

Defines methods for developing precision statements as reported in UOP methods and relative bias of the same method between different laboratories.

DocumentType
Standard
PublisherName
American Society for Testing and Materials
Status
Current

This method is for developing precision statements as reported in UOP methods and relative bias of the same method between different laboratories. The calculation of precision, in terms of repeatability and intermediate precision (within a laboratory), reproducibility (between laboratories) and relative bias (between laboratories) is described. Precision statements in methods having a 98 or later suffix were developed by the procedure described; methods having an 88 through 97 suffix used UOP 888-88, while methods with suffixes earlier than 88 used UOP 666-82.

The features of UOP 999 are as follows:

Minimum of 16 analyses required with emphasis on multiple concentration levels
Better identification of the components of variation and repeatability estimates
Alignment with ASTM repeatability, intermediate precision, and reproducibility definitions
Relative bias between laboratories with 95% confidence interval

UOP 999 is the minimum guideline for estimating the initial precision for new or revised methods. Once a new or revised method is in use, a reference sample, if available, should be run on a regular basis. When 16 analyses have been completed, individual and range control charts are to be used to estimate the long-term UOP repeatability and are to be maintained on an ongoing basis. The example calculations in UOP 999 are made using Minitabâ, a statistical software package. The details of the calculations are in UOP 999-97 Supplement.

ASTM UOP 965 : 2010 Total Cycloparaffins and Total Aromatics in Synthetic Paraffinic Kerosene Fuels by Comprehensive Two-Dimensional GC with Flame Ionization Detection
ASTM UOP 1021 : 2017 Determination of Trace Methyl and Ethyl Mercaptan in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
ASTM U 016 : 2017 Ash from Petroleum Products by Microwave
ASTM U 01 : 2013 Normal Paraffins by Subtractive GC
ASTM UOP 481 : 2010 Water in Liquid Hydrocarbons, and Heavy Hydrocarbons by Vaporizer, using Coulometry
ASTM UOP 578 : 2011 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
ASTM UOP 912 : 2006 Fluoride in Catalysts, Molecular Sieves, and Aqueous Solutions by Ion Selective Electrode
ASTM U 09 : 2014 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
ASTM UOP 373 : 2008 Composition of C<sub>2</sub> Through C<sub>5</sub> Hydrocarbon Mixtures by GC
ASTM UOP 980 : 2007 C<sub>5</sub> and Lower Boiling Dienes, Olefins, and Paraffins in Naphthas by GC
ASTM UOP 555 : 2010 Trace Impurities in Benzene by GC
ASTM UOP 905 : 2008 Platinum Agglomeration by X-Ray Diffraction
ASTM UOP 976 : 2002 Trace C<sub>4</sub>-C<sub>9</sub> Saturates in High Purity Aromatics by GC
ASTM UOP 254 : 2014 Apparent Bulk Density of Fluid Cracking Catalyst
ASTM UOP 851 : 2008 Density of Powders and Solids by Helium Displacement
ASTM UOP 678 : 2004 Dissolved Molecular Oxygen in Liquid Hydrocarbons by Electrochemical Detection
ASTM UOP 539 : 2012 Refinery Gas Analysis by GC
ASTM UOP 931 : 2010 Trace Impurities in Mixed Xylenes by GC
ASTM UOP 688 : 2009 Normal Olefins and Normal Paraffins by GC
ASTM U 003 : 2013 Trace Metals in Methanol by ICP-OES
ASTM UOP 964 : 2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
ASTM U 09 : 2011 Trace Hydrocarbons in Udex Solvent by GC
ASTM UOP 993 : 2015 Water in Solids by Furnace Desorption with Volumetric Karl Fischer Titration
ASTM UOP 551 : 2008 C<sub>6</sub> and Lower Boiling Hydrocarbons in Olefin Free Naphthas by GC
ASTM UOP 779 : 2008 Chloride in Petroleum Distillates by Microcoulometry
ASTM UOP 778 : 2007 Packed Apparent Bulk Density (ABD) of Extruded Catalyst
ASTM UOP 673 : 2012 Linear Alkylbenzene Isomer Distribution in Detergent Alkylate by GC
ASTM UOP 683 : 2011 Sulfide in Refinery Waste Water
ASTM UOP 983 : 2004 Acetylenes in 1,3-Butadiene by GC
ASTM UOP 938 : 2010 Total Mercury and Mercury Species in Liquid Hydrocarbons
ASTM U 014 : 2017 Determination of Trace Propadiene and Methyl Acetylene Impurities in Polymer Grade Propylene by Gas Chromatography
ASTM UOP 333 : 2010 Fines in Catalysts and Catalyst Supports by Sieve Analysis
ASTM UOP 988 : 2011 Low Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
ASTM UOP 377 : 2013 Free Sulfur in LPG by Mercury Number
ASTM UOP 864 : 2012 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
ASTM UOP 968 : 2000 Foots Oil in Methyl Isobutyl Ketone by GC
ASTM UOP 720 : 2008 Impurities in, and Purity of, High Purity p-Xylene by GC
ASTM UOP 291 : 2015 Total Chloride in Alumina and Silica-Alumina Catalysts by Microwave Digestion and Potentiometric Titration
ASTM UOP 987 : 2015 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
ASTM UOP 588 : 2012 Total, Inorganic, and Organic Chloride in Hydrocarbons
ASTM UOP 979 : 2014 Total Chloride in Alumina Supported Catalysts by WD-XRF
ASTM UOP303 : 2007 Impurities in Catalysts by ICP-OES
ASTM UOP936 : 2016 Combined Nitrogen in LPG by Chemiluminescence
ASTM UOP 924 : 2000 Nickel, Tungsten, Sodium and Aluminum in Hydrocracking Catalysts by ICP-AES
ASTM UOP 925 : 1992 Nickel, Molybdenum, Phosphorus, Cobalt and Aluminum in Fresh Catalysts by ICP-AES
ASTM UOP 495 : 2003 Aromatics in Molex Process n-Paraffin Products by Ultraviolet Spectrophotometry
ASTM UOP 699 : 2009 Sodium in Liquefied Petroleum Gas by ICP-OES or AAS
ASTM U 015 : 2017 Determination of Trace Oxygenates in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
ASTM UOP 899 : 2004 Trace Hydrocarbons in Hydrogen, Hydrocarbon Gases or LPG by GC
ASTM UOP 714 : 2007 Metals in Miscellaneous Samples by ICP-OES
ASTM UOP 947 : 2015 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method
ASTM UOP 294 : 2014 Apparent Bulk Density of Catalyst Particles
ASTM UOP 733 : 2010 Residual Triglycerides in Deoxygenated Feedstocks by GC
ASTM UOP 212 : 2005 Hydrogen Sulfide, Mercaptan Sulfur, and Carbonyl Sulfide in Hydrocarbon Gases by Potentiometric Titration
ASTM UOP 796 : 2009 Silicon in Petroleum Liquids by ICP-OES
ASTM UOP 801 : 2014 Size Distribution of Charcoal Particles
ASTM UOP 549 : 2009 Sodium in Petroleum Distillates by ICP-OES or AAS
ASTM U 05 : 2013 Trace Impurities in High Purity Ethyl Benzene by GC
ASTM UOP 981 : 2014 Trace Nitrogen in Liquid Hydrocarbons by Oxidative Combustion with Chemiluminescence Detection
ASTM U 09 : 2015 Trace Metals in Organics by ICP-OES
ASTM UOP 991 : 2017 Trace Chloride, Fluoride, and Bromide in Liquid Organics by Combustion Ion Chromatography (CIC)
ASTM UOP 992 : 2011 Trace Arsenic in Liquid Organics and Heavy Petroleum Fractions by ICP-MS
ASTM UOP 856 : 2007 Particle Size Distribution of Powders by Laser Light Scattering
ASTM U 009 : 2015 Total Mercury in Solids
ASTM UOP 163 : 2010 Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration
ASTM U 006 : 2014 Trace Silicon in Petroleum Liquids by ICP-MS
ASTM UOP 954 : 2011 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
ASTM UOP 209 : 2000 Alkalinity, Sulfide and Mercaptide Analyses of Used Refinery Caustic Solutions
ASTM UOP 311 : 2002 Hydrocarbon Types by Fluorescent Indicator Adsorption (FIA)
ASTM UOP 563 : 2014 Packed Apparent Bulk Density of Molecular Sieves
ASTM UOP 930 : 2007 Chloride in LPG and Gaseous Hydrocarbons by Dry Colorimetry
ASTM UOP 603 : 2013 Trace CO and CO<sub>2</sub> in Hydrogen and Light Gaseous Hydrocarbons by GC
ASTM UOP 863 : 2001 Trace Desorbent in C10-C18 Molex Products by GC
ASTM UOP 326 : 2017 Diene Value by Maleic Anhydride Addition Reaction
ASTM UOP 702 : 2009 Impurities in Distilled High Purity Cumene by GC
ASTM UOP 972 : 2001 Aluminum, Silicon and Silver in Acetic Acid by ICP-OES
ASTM U 001 : 2014 Chloride and Fluoride in Liquefied Petroleum Gases (LPG) by Combustion Ion Chromatography (CIC)
ASTM UOP 543 : 2011 Trace Non-Aromatic Hydrocarbons in High-Purity Aromatics by GC
ASTM U 02 : 2014 Disulfide Sulfur in Light Petroleum Distillates and LPG
ASTM U 022 : 2018 Determination of Trace Carbonyl Sulfide and Hydrogen Sulfide in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
ASTM U 00 : 2006 Trace Oxygenated Hydrocarbons in Liquid Hydrocarbon Streams by GC
ASTM U 000 : 2013 Smoke Point Determination of Kerosene and Aviation Turbine Fuel Using an Automated Method
ASTM UOP 990 : 2011 Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection
ASTM UOP 967 : 2012 Automated Crush Strength of Spherical and Extruded Catalysts
ASTM UOP 304 : 2008 Bromine Number and Bromine Index of Hydrocarbons by Potentiometric Titration
ASTM UOP 464 : 2000 Phenol in Light Aromatic Hydrocarbons and Cyclohexane by Spectrophotometry
ASTM UOP 730 : 2009 Total Oxygen in Liquid Hydrocarbons by Pyrolysis
ASTM UOP 971 : 2000 Trace Nitrogen in Light Aromatic Hydrocarbons by Chemiluminescence
ASTM UOP 391 : 2009 Trace Metals in Organics by AAS
ASTM U 04 : 2013 Platinum in Fresh Catalysts by Spectrophotometry
ASTM UOP 624 : 2014 Carbonyl Number by Chemical Analysis
ASTM UOP 565 : 2005 Acid Number and Naphthenic Acids by Titration
ASTM UOP 880 : 2008 Hydrocarbon Types and Distributions in Low Olefin C<sub>12</sub> and Lower Endpoint Distillates by GC
ASTM UOP 961 : 2012 Elemental Composition of Zeolites by ICP-OES
ASTM UOP 986 : 2008 Arsenic in Heavy Petroleum Fractions using Microwave Digestion and Graphite Furnace-AAS
ASTM UOP 703 : 2009 Carbon on Catalysts by Induction Furnace Combustion and Infrared Detection
ASTM U 005 : 2014 Trace Metals in Organics by ICP-MS
ASTM UOP744 : 2006 Aromatics in Hydrocarbons by GC
ASTM UOP 973 : 2001 Automated Crush Strength of Extruded Catalysts
ASTM UOP 410 : 2014 Sodium in Catalysts by AAS
ASTM UOP 407 : 2009 Trace Metals in Organics by Dry Ashing - ICP-OES
ASTM UOP 732 : 2009 Analysis of Distillate Fuels Derived from Oxygenated (Bio) Feedstocks by GC
ASTM UOP 791 : 2016 Sulfur Components in LPG Fractions by GC-SCD
ASTM U 013 : 2016 Total Chloride in Liquid Hydrocarbons by Wavelength Dispersive X-Ray Fluorescence
ASTM UOP 269 : 2010 Nitrogen Bases in Hydrocarbons by Potentiometric Titration
ASTM UOP 799 : 2008 Chloride in Liquid Hydrocarbons by Dry Colorimetry

ASTM E 177 : 2014 : REDLINE Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.