ATS 5200.037.1-2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
11-09-2018
English
31-03-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This Australian Technical Specification sets out requirements for pressure-compensating type flow control devices that deliver a fixed and constant flow rate, throughout a given pressure differential range.
| Committee |
WS-031
|
| DocumentType |
Technical Specification
|
| ISBN |
0 7337 7328 1
|
| Pages |
7
|
| ProductNote |
Withdrawn 11-09-2018.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Australian Technical Specification sets out requirements for pressure-compensating type flow control devices that deliver a fixed and constant flow rate, throughout a given pressure differential range. It is intended for in-line flow control to deliver maximum constant flow rates in various plumbing, industrial or water utility type applications, or for system management.NOTE: Flow controllers used for water conservation in accordance with WELS scheme are covered by ATS 5200.037.2.
Originated as ATS 5200.037-2004.
Revised and redesignated as ATS 5200.037.1-2006
| ATS 5200.101-2005 | Appliances (low hazard rating) |
| ATS 5200.105-2005 | |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 2345-1992 | Dezincification resistance of copper alloys |
| ATS 5200.037-2004 | Technical Specification for plumbing and drainage products - Flow controllers |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| ATS 5200.469-2005 | Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device |
| ATS 5200.461-2004 | Technical Specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications |
| ATS 5200.006-2005 | Technical Specification for plumbing and drainage products Reflux valves - Sewerage |
| ATS 5200.050-2005 | Technical Specification for plumbing and drainage products Prefabricated bathroom modules |
| ATS 5200.028-2004 | Technical Specification for plumbing and drainage products - Commercial food waste disposal unit |
| AS 1357.2-2005 | Valves primarily for use in heated water systems Control valves (Reconfirmed 2015) |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| ATS 5200.030-2004 | Technical Specification for plumbing and drainage products - Solenoid valves |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| ATS 5200.046-2005 | Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush |
| ATS 5200.042-2004 | Technical Specification for plumbing and drainage products - Roll-grooved jointing systems |
| ATS 5200.040-2005 | Waste pipe connection outlets and gratings, separate or integral |
| ATS 5200.007-2004 | Technical Specification for plumbing and drainage products - Water hammer arrestors |
| ATS 5200.033-2004 | Technical Specification for plumbing and drainage products Spraying apparatus/dispensing units with the option of chemical additions - Hose connected |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
| ATS 5200.463-2005 | Positive air pressure attenuator |
| ATS 5200.014-2004 | Technical Specification for plumbing and drainage products - Jointing materials |
| ATS 5200.104-2005 | Appliances (miscellaneous) |
| ATS 5200.460-2005 | Technical Specification for plumbing and drainage products Grey water diversion device (GWDD) |
| ATS 5200.051-2005 | Technical Specification for plumbing and drainage products Bidet douche seats |
| ATS 5200.999-2005 | Technical Specification for plumbing and drainage products Developing technical specifications |
| ATS 5200.004-2005 | Technical Specification for plumbing and drainage products Urinal flushing cisterns |
| ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
| AS 1646.4-2005 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates |
| AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
| ATS 5200.471-2005 | Technical specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems |
| ATS 5200.026-2004 | Technical Specification for plumbing and drainage products Cold water storage tanks |
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| ATS 5200.016-2005 | Technical Specification for plumbing and drainage products - Cistern inlet valves |
| ATS 5200.021-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply |
| ATS 5200.458-2004 | Technical Specification for plumbing and drainage products Universal transition fitting |
| ATS 5200.476-2006 | Technical Specification for plumbing and drainage products Heated water systems - Leak protection device |
| ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| ATS 5200.468-2005 | Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves |
| ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
| ATS 5200.459-2004 | |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| AS 4087-2004 | Metallic flanges for waterworks purposes |
| ATS 5200.053-2006 | Technical Specification for plumbing and drainage products Stainless steel pipes and tubes |
| AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
| ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
| ATS 5200.017-2005 | Technical Specification for plumbing and drainage products Cistern outlet valves |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| ATS 5200.103-2004 | Technical Specification for plumbing and drainage products - Water treatment systems (other than those specified in AS/NZS 3497) |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| ATS 5200.453-2004 | Technical Specification for plumbing and drainage products Heated water systems - Thermostatic circulation valve |
| ATS 5200.478-2006 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications |
| ATS 5200.052-2005 | Metallic-bodied inlet pressure control valves greater than DN 50 |
| ATS 5200.477-2006 | Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices |
| ATS 5200.047-2005 | Technical Specification for plumbing and drainage products Self-sealing devices |
| ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
| ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.