AWS A5.9 : 93(R1999)

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR

Available format(s):

Superseded date: 23-07-2013

Language(s):

Published date: 12-01-2013

Publisher: American Welding Society

Table of Contents - (Show below) - (Hide below)

Personnel
Foreword
1 Scope
Part A - General requirements
2 Classification
3 Acceptance
4 Certification
5 Units of measure and rounding-off procedure
Part B - Tests, procedures, and requirements
6 Summary of tests
7 Retest
8 Chemical analysis
Part C - Manufacture, identification, and packaging
9 Method of manufacture
10 Standard sizes and shapes
11 Finish and uniformity
12 Standard package forms
13 Winding requirements
14 Filler metal identification
15 Packaging
16 Marking of packages
Appendix - Guide to specification for bare stainless
           steel welding electrodes and rods
A1 Introduction
A2 Classification system
A3 Acceptance
A4 Certification
A5 Preparation of samples for chemical analysis
A6 Ventilation during welding
A7 Ferrite in weld deposits
A8 Description and intended use of filler metals
A9 Usability
A10 Special tests
A11 Safety considerations
Tables
1 Chemical composition requirements
2 Standard wire sizes of electrodes and rods
3 Standard sizes of strip electrodes
4 Standard package dimensions and weights
A1 Variations of alloying elements for submerged arc
     welding
A2 Tensile requirements for all-weld-metal from
     ANSI/AWS A5.4-92
Figures
1 Standard 4 in. (100 mm) diameter spool dimensions
2 Standard 8 and 12 in. (200 and 300 mm) diameter
     spool dimensions
A1 WRC-1988 diagram for stainless steel weld metal
A2 Espy percent ferrite diagram for stainless steel
     weld metal
A3 DeLong (FN) diagram for stainless steel weld metal
AWS filler metal specifications and related documents

Abstract - (Show below) - (Hide below)

93 VERSION CONTAINED IN ASME PV CODE 2C AS SFA-5.9 Covers the above and includes alloy steels designated as corrosion or heat resisting chromium and chromium nickel steels, in which chromium exceeds 4 percent and nickel does not exceed 50 percent. Coverage includes: packaging, chemical analysis, winding requirements, safety considerations, filler metal identification, marking of packages, method of manufacture, classification, standard package forms, and standard sizes and shapes. Also gives detailed tables, diagrams and appendices.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes MIL R 5031 (B). (07/2004)
Document Type	Standard
ISBN
Pages
Published
Publisher	American Welding Society
Status	Superseded
Superseded By	AWS A5.9/A5.9M : 2006 AWS A5.9/A5.9M : 2012
Supersedes	MIL R 5031 : B

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
SAE AMS 5680 : 2011	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

MIL STD 248 : D	WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION
AWS PASS : 1999	PROFESSIONAL'S ADVISOR ON WELDING OF STAINLESS STEEL
AWS GWF : 1998	GUIDE FOR SETTING UP A WELDER TRAINING FACILITY
AWS F1.3M : 2006	A SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT
AWWA C223 : 2013	FABRICATED STEEL AND STAINLESS STEEL-TAPPING SLEEVES
ASTM E 235/E235M : 2012 : R2018	Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
MIL-STD-278 Revision F:1987	WELDING AND CASTING STANDARD
API 594 RUSSIAN : 2004	CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING
AWS F1.3 : 1999	A SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT
MSS SP 118 : 2007	COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE)
AWS EG3.0 : 1996	TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 2 - ADVANCEDWELDER, GUIDE FOR THE
NACE RP 01 99 : 2004	INSTALLATION OF STAINLESS CHROMIUM-NICKEL STEEL AND NICKEL-ALLOY ROLL-BONDED AND EXPLOSION-BONDED CLAD PLATE IN AIR POLLUTION CONTROL EQUIPMENT
MIL-STD-1261 Revision C:1988	ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS
ASTM E 608/E608M : 2013 : REDLINE	SPECIFICATION FOR MINERAL-INSULATED, METAL-SHEATHED BASE METAL THERMOCOUPLES
SAE AS 1424 : 2014	HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE
SAE AS 5420 : 2017	HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
ASTM E 235/E235M : 2012	Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
NASA SPEC 5004A : 2003	WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES
NASA PRC 0010 : 2012	PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF STEEL AND NICKEL ALLOY HARDWARE
AISC N690L : 2003	LOAD AND RESISTANCE FACTOR DESIGN OF SAFETY-RELATED STEEL STRUCTURES FOR NUCLEAR FACILITIES
AWS C5.5/C5.5M : 2003	RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING
AWS D14.2 : 1993	SPECIFICATION FOR METAL CUTTING MACHINE TOOL WELDMENTS
AWS EG4.0 : 1996	GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER
AWS D1.6 : 1999 ERRATA 1999	STRUCTURAL WELDING CODE - STAINLESS STEEL
ASTM A 312/A312M : 2017-03	SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ASTM A 774/A774M : 2014 : REDLINE	Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM E 608/E608M : 2013 : R2019	Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
SAE AS 4468 G : 2017	HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
AWWA C507 : 2015	BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM)
ASTM A 790/A790M : 2018 : REDLINE	Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
API 594 : 2017	CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
ASME B31.5 : 2016	REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS

Standards Referencing This Book - (Show below) - (Hide below)

AWS A5.4 : 92(R2000)	STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR
ASTM E 353 : 2014 : REDLINE	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
AWS A3.0 : 0	STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
AWS A5.01 : 93(R1999)	FILLER METAL PROCUREMENT GUIDELINES
ASTM G 4 : 2001	Standard Guide for Conducting Corrosion Tests in Field Applications
ANSI Z87.1 : 2015	OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES
AWS B4.0:2016	STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
AWS A4.2M/A4.2 : 1997	STANDARD PROCEDURE FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS WELD METAL
AWS F2.1 : 1978	ELECTRON BEAM WELDING AND CUTTING, RECOMMENDED SAFE PRACTICES FOR,

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart