AWWA C515 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
Hardcopy , PDF
09-09-2024
English
01-02-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
I Introduction
II Special Issues
III Use of This Standard
IV Major Revisions
V Comments
Standard
1 General
2 References
3 Definitions
4 Requirements
5 Verification
6 Delivery
Appendix
A - Installation, Operation, and Maintenance of Reduced-Wall,
Resilient-Seated Gate Valves
Specifies reduced-wall, resilient-seated gate valves with non-rising stems (NRS) and outside screw-and-yoke (OS&Y) rising stems, including tapping gate valves, for water supply service having a temperature range of 33 degree to 125 degree F (0.6 degree to 52 degree C).
| DocumentType |
Standard
|
| ISBN |
9781613003633
|
| Pages |
48
|
| PublisherName |
American Water Works Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| AWWA M44 : 2016 | DISTRIBUTION VALVES: SELECTION, INSTALLATION, FIELD TESTING, AND MAINTENANCE |
| MSS SP 92 : 2012 | MSS VALVE USER GUIDE |
| AWWA M41 : 3 | Ductile-Iron Pipe and Fittings, Third Edition |
| AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ANSI/AWWA C600:2023 | INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| AWWA C153/A21.53 : 2011 | DUCTILE-IRON COMPACT FITTINGS |
| NSF 61 : 2016 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
| AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
| ASTM B 154 : 2016 : REDLINE | Standard Test Method for Mercurous Nitrate Test for Copper Alloys |
| AWWA C550 : 2017 | PROTECTIVE INTERIOR COATINGS FOR VALVES AND HYDRANTS |
| ASTM D 429 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| AWWA M27 : 3 | EXTERNAL CORROSION CONTROL FOR INFRASTRUCTURE SUSTAINABILITY |
| ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| AWWA C600 : 2010 | INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES |
| SAE AS568D | Aerospace Size Standard for O-rings |
| MSS SP 113 : 2017 | CONNECTING JOINTS BETWEEN TAPPING MACHINES AND TAPPING VALVES |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| ASTM B 763/B763M : 2015 : REDLINE | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
| MSS SP 60 : 2017 | CONNECTING FLANGE JOINT BETWEEN TAPPING SLEEVES AND TAPPING VALVES |
| ASTM A 27/A27M : 2017 : REDLINE | Standard Specification for Steel Castings, Carbon, for General Application |
| AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| MSS SP 9 : 2013 | SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
| ASTM A 276/A276M : 2017 : REDLINE | Standard Specification for Stainless Steel Bars and Shapes |
| ASTM B 62 : 2017 : REDLINE | Standard Specification for Composition Bronze or Ounce Metal Castings |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| NSF 372 : 2016 | DRINKING WATER SYSTEM COMPONENTS - LEAD CONTENT |
| ASTM A 380/A380M : 2017 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.