DIN EN 1254-8:2012-12
|
Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes |
13/30268239 DC : 0
|
BS EN 1487 - BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
PREN 1487 : DRAFT 2012
|
BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
DIN 50930-5:1993-02
|
CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF COPPER AND COPPER ALLOYS |
DIN EN 1254-6:2012-12
|
Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
02/103309 DC : DRAFT MAY 2002
|
BS EN 14455 - DEVICES TO PREVENT POLLUTION BY BLACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 INCLUSIVE - FAMILY L, TYPE A AND TYPE B |
DIN 3523:2001-04
|
Fittings for drinking water installations - Extensions |
DIN CEN/TS 13547:2007-02
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
04/30126822 DC : 0
|
EN 15092 - BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
UNE-EN 13547:2014
|
Industrial valves - Copper alloy ball valves |
DD CEN/TS 13547:2006
|
Industrial valves. Copper alloy ball valves |
I.S. EN 1254-1:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
I.S. EN 1254-3:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES |
PREN 1254-6 : DRAFT 2011
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTING WITH PUSH-FIT ENDS |
AWWA C515 : 2015
|
REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
I.S. EN 13547:2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
NSF 14 : 2016
|
PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
DIN EN 13434:2006-05
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G - TYPE B |
DIN EN 13433:2006-05
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G - TYPE A |
DIN EN 1254-1:1998-03
|
Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
BS EN 1490:2000
|
Building valves. Combined temperature and pressure relief valves. Tests and requirements |
BS EN 14454:2005
|
Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A |
BS EN 13828:2003
|
Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements |
BS EN 15266:2007
|
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
DIN EN 15266 E : 2007
|
STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR |
BS EN 1254-2:1998
|
Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
BS EN 1567 : 2000
|
BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER REDUCING VALVES - REQUIREMENTS AND TESTS |
BS EN 14453:2005
|
Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C |
BS EN 13433:2007
|
Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A |
BS EN 12420:2014
|
Copper and copper alloys. Forgings |
BS EN 1489:2000
|
Building valves. Pressure safety valves. Tests and requirements |
BS EN 14367:2005
|
Non controllable backflow preventer with different pressure zones. Family C, type A |
DIN EN 12502-2:2005-03
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS |
EN 13443-1:2002+A1:2007
|
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing |
EN 12729:2002
|
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A |
EN 13433:2006
|
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A |
EN 13547:2013
|
Industrial valves - Copper alloy ball valves |
DIN EN 14367:2005-10
|
Non controllable backflow preventer with different pressure zones - Family C, type A |
EN 12502-2 : 2004
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS |
DIN EN 14453:2005-08
|
Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005 |
CEN/TS 13547:2006
|
Industrial valves - Copper alloy ball valves |
AWWA C502 : 2014
|
DRY-BARREL FIRE HYDRANTS |
07/30163621 DC : 0
|
BS EN 1254-5 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
04/30095586 DC : 0
|
EN 1254-6 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTING WITH PUSH-FIT ENDS |
BS EN 1254-8:2012
|
Copper and copper alloys. Plumbing fittings Fittings with press ends for use with plastics and multilayer pipes |
DIN EN 14506 E : 2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C |
I.S. EN 14506:2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C |
DIN EN 15266:2007-08
|
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
DIN EN 14868:2005-11
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
DIN EN 14868 E : 2005
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
ISO 17885:2015
|
Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
BS EN 1254-3:1998
|
Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes |
BS EN 13443-1:2002
|
Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing |
BS EN 12729:2002
|
Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A |
DIN EN 1487:2000-06
|
BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
DIN EN 12420:1999-03
|
COPPER AND COPPER ALLOYS - FORGINGS |
I.S. EN 13434:2006
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G, TYPE B |
I.S. EN 13443-1:2002
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
I.S. EN 1487:2014
|
BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
I.S. EN 13433:2006
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G, TYPE A |
I.S. EN 12420:2014
|
COPPER AND COPPER ALLOYS - FORGINGS |
DIN EN 15092:2008-09
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
BS EN 15092:2008
|
Building valves. Inline hot water supply tempering valves. Tests and requirements |
07/30163615 DC : 0
|
BS EN 1254-1 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
11/30213587 DC : 0
|
BS EN 1254-6 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
10/30213423 DC : 0
|
BS 8537 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - SPECIFICATION FOR FITTINGS WITH PRESS ENDS FOR METALLIC TUBES |
07/19990369 DC : 0
|
BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
NACE TM 01 69 : 2012
|
Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
I.S. EN 15092:2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
07/30163618 DC : 0
|
BS EN 1254-2 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
12/30261889 DC : 0
|
BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS |
11/30213590 DC : 0
|
BS EN 1254-8 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
DIN EN 15096:2008-04
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
14/30312005 DC : 0
|
BS EN 61770: 2009/PRAA: 2014 - ELECTRIC APPLIANCES CONNECTED TO THE WATER MAINS - AVOIDANCE OF BACKSIPHONAGE AND FAILURE OF HOSE-SETS |
EN 1254-3:1998
|
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
UNI EN 1254-8 : 2012
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
I.S. EN 1254-2:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
I.S. EN 1254-5:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
ASTM G 31 : 2012
|
GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
CSA B137 COMPENDIUM : 2017
|
THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
PREN 12420 : DRAFT 2012
|
COPPER AND COPPER ALLOYS - FORGINGS |
UNI EN 13547 : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
I.S. CEN TS 13547:2006
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
I.S. EN 15096:2008
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
DIN EN 14451:2005-08
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
EN 12420:2014
|
Copper and copper alloys - Forgings |
DIN EN 13443-1:2007-12
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
DIN EN 1487:2014-09
|
BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
DIN EN 12420:2014-09
|
COPPER AND COPPER ALLOYS - FORGINGS |
DIN EN 14452 E : 2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PIPE INTERRUPTER WITH ATMOSPHERIC VENT AND MOVING ELEMENT DN 10 TO DN 20 - FAMILY D, TYPE B |
DIN EN 14451 E : 2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
DIN EN 14454 E : 2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 - FAMILY H, TYPE A |
BS EN 14451:2005
|
Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A |
EN 15096:2008
|
Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification |
EN 14451:2005
|
Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A |
I.S. EN 14451:2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
UNI EN 1487 : 2014
|
BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
UNI EN 12420 : 2014
|
COPPER AND COPPER ALLOYS - FORGINGS |
DIN EN 13547:2013-12
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
DIN EN 15096 E : 2008
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
12/30255878 DC : 0
|
BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
BS EN 14506:2005
|
Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C |
UNE-EN 1254-8:2013
|
Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes |
BS EN 13547:2013
|
Industrial valves. Copper alloy ball valves |
UNI EN 1254-6 : 2012
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
EN 1254-8:2012
|
Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes |
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
02/103308 DC : DRAFT MAY 2002
|
BS EN 14454 - DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 INCLUSIVE - FAMILY H, TYPE A |
AWWA C509 : 2015
|
RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
I.S. EN 1254-8:2012
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
I.S. EN 1254-6:2012
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
DIN EN 14453 E : 2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PIPE INTERRUPTER WITH PERMANENT ATMOSPHERIC VENT DN 10 TO DN 20 - FAMILY D, TYPE C |
DIN EN 14455 E : 2005
|
DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 - FAMILY L, TYPE A AND TYPE B |
ONORM EN 1254-8 : 2013
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES |
BS EN 14868:2005
|
Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems |
BS EN 1254-5:1998
|
Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes |
BS EN 1488:2000
|
Building valves. Expansion groups. Tests and requirements |
BS EN 1487:2014
|
Building valves. Hydraulic safety groups. Tests and requirements |
BS EN 13959:2004
|
Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D |
BS EN 12502-2:2004
|
Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems Influencing factors for copper and copper alloys |
BS EN 1213:2000
|
Building valves. Copper alloy stopvalves for potable water supply in buildings. Tests and requirements |
BS EN 806-2:2005
|
Specifications for installations inside buildings conveying water for human consumption Design |
UNE-EN 12420:2015
|
Copper and copper alloys - Forgings |
BS EN 14452:2005
|
Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B |
BS EN 13434:2006
|
Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B |
DIN EN 14455:2005-08
|
Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
EN 14455:2005
|
Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
EN 15266:2007
|
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
EN 15092:2008
|
Building valves - Inline hot water supply tempering valves - Tests and requirements |
EN 13828:2003
|
Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements |
EN 14868 : 2005
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
EN 806-2:2005
|
Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
EN 1487:2014
|
Building valves - Hydraulic safety groups - Tests and requirements |
EN 1567:1999
|
Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests |
EN 1490:2000
|
Building valves - Combined temperature and pressure relief valves - Tests and requirements |
EN 14506:2005
|
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
EN 14454:2005
|
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A |
EN 14452:2005
|
Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B |
EN 13959:2004
|
Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
EN 14367:2005
|
Non controllable backflow preventer with different pressure zones - Family C, type A |
EN 14453:2005
|
Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C |
DIN EN 15092 E : 2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
BS EN 1254-6:2012
|
Copper and copper alloys. Plumbing fittings Fittings with push-fit ends |
96/102362 DC : DRAFT MAR 1996
|
PREN 806-2 - SPECIFICATION FOR INSTALLATION INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
BS ISO 17885:2015
|
Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
EN 1254-6:2012
|
Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
UNI EN 15092 : 2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
07/30168419 DC : 0
|
BS EN 1982 - COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
BS EN 15096:2008
|
Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification |
04/30095590 DC : 0
|
EN 1254-7 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 7: FITTINGS WITH PRESS ENDS FOR METALLIC TUBES |
UNE-EN 1254-6:2013
|
Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
ASTM G 31 : 2012 : REV A
|
GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
UNI EN 806-2 : 2008
|
SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
UNE-EN 15266:2008
|
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
DIN EN 12502-2 E : 2005
|
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS |
DIN EN 14367 E : 2005
|
NON CONTROLLABLE BACKFLOW PREVENTER WITH DIFFERENT PRESSURE ZONES - FAMILY C, TYPE A |
DIN EN 806-2:2005-06
|
Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
BS EN 1254-1:1998
|
Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes |
BS EN 1491:2000
|
Building valves. Expansion valves. Tests and requirements |
BS EN 14455:2005
|
Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50. Family L, type A and type B |
EN 13434:2006
|
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B |
EN 1213:1999
|
Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
DIN EN 13959:2005-01
|
Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004 |
DIN EN 14454:2005-08
|
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A |
DIN EN 14452:2005-08
|
Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005 |
DIN EN 14506:2005-08
|
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |