BIS IS 1364-6 : 2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2
Superseded date
14-11-2019
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
NATIONAL FOREWORD
1 Scope
2 Normative references
3 Dimensions
4 Specifications and reference standards
5 Designation
Bibliography
Describes the characteristics of hexagon nuts, style 2, with threads from M5 up to and including M36, with product grade A for threads d <= M16 and product grade B for threads d > M16.
| Committee |
BPD 33
|
| DevelopmentNote |
Supersedes BIS IS/ISO 4033. (02/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 4033:2012 | Identical |
| BIS IS 15859 : 2013 | COTTON SEED DELINTING MACHINERY - BUFFING MACHINE WITH AIR JET AND NYLON BRUSH - SPECIFICATION |
| BIS IS 15860 : 2013 | COTTON SEED DELINTING MACHINERY - AMMONIA COTTON SEED NEUTRALIZER MACHINE WITH AMMONIA VAPORIZER - SPECIFICATION |
| BIS IS 15861 : 2013 | COTTON SEED DELINTING MACHINERY - POLLUTION CONTROL SYSTEM WITH SCRUBBER, CYCLONE, CHIMNEY, HOODS AND DUCTING - SPECIFICATION |
| BIS IS 15862 : 2013 | COTTON SEED DELINTING MACHINERY - HCL GAS GENERATION UNIT - SPECIFICATION |
| BIS IS 15856 : 2010 | COTTON SEED DELINTING MACHINERY - PRE-HEATING MACHINE - SPECIFICATION |
| BIS IS 15855 : 2010 | COTTON SEED DELINTING MACHINERY - SURGE BIN MACHINE - SPECIFICATION |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| BIS IS 14962-1 : 2001 AMD 1 2013 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLE AND BASIC DATA |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread Product grades A and B |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 7412:1984 | Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) Product grade C Property classes 8.8 and 10.9 |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 7417:1984 | Hexagon nuts for structural bolting Style 2, hot-dip galvanized (oversize tapped) Product grade A Property class 9 |
| ISO 4775:1984 | Hexagon nuts for high-strength structural bolting with large width across flats Product grade B Property classes 8 and 10 |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| BIS IS 4218-3 : 1999 AMD 1 2012 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 3: BASIC DIMENSIONS |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread Product grades A and B |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| BIS IS 8536 : 1987(R2003) | FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATION OF DIMENSIONS |
| ISO 4015:1979 | Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| BIS IS 1367-2 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 2: TOLERANCES FOR FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 7414:1984 | Hexagon nuts for structural bolting with large width across flats, style 1 Product grade B Property class 10 |
| ISO 7413:1984 | Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) Product grades A and B Property classes 5, 6 and 8 |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) Product grade B |
| BIS IS 1367-17 : 2005 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 17: INSPECTION, SAMPLING AND ACCEPTANCE PROCEDURE |
| ISO 15071:2011 | Hexagon bolts with flange Small series Product grade A |
| ISO 7411:1984 | Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) Product grade C Property classes 8.8 and 10.9 |
| ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| BIS IS 1367-10 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 10: SURFACE DISCONTINUITIES - NUTS |
| BIS IS 1367-6 : 1994(R2015) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 6: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITH SPECIFIED PROOF LOADS |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| BIS IS 1367-11 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 11: ELECTROPLATED COATINGS |
| ISO 4162:2012 | Hexagon bolts with flange Small series Product grade A with driving feature of product grade B |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.