BS 3202-2:1991
Current
The latest, up-to-date edition.
Laboratory furniture and fittings Specification for performance
Hardcopy , PDF
English
08-04-2002
Committees responsible
Foreword
Specification
1. Scope
2. Definitions
3. Performance grades
4. Performance
5. Strength and stability
6. Surface finishes
7. Test samples
8. Test report
9. Marking
Appendices
A. Method of test for the assessment of support system
strength
B. Method of test for surface penetration and the
assessment of tool blunting propensity
C. Method of test for impact
D. Method of test for the assessment of surface
resistance to wet and dry heat
E. Method of test for the assessment of surface
resistance to cold liquids
F. Method of test for the assessment of resistance to
surface wear of applied finishes
G. Method of test for assessment of adhesion of paints
and lacquers to substrates (cross cut test)
H. Method of test for the assessment of resistance to
surface heating
J. Method of test for the assessment of peel strength
K. Method of test for the assessment of shrinkage
resistance
L. Method of test for the assessment of bond quality
M. Method of test for the assessment of the adhesion
of edging material to substrate
N. Method of test for the determination of resistance
to humidity under condensation conditions induced
by cyclic temperature changes between 42 deg C and
48 deg C
P. Method of test for water ingress
Q. Method of test for assessing the effects of flooding
R. Method of assessment of ease of worktop and work
surface renovation
S. Method of test for impact by large ball for
assessment of accidental instrument damage propensity
T. Manufacturing tolerances on dimensions and tolerances
on furniture assembly
Tables
1. Description of performance grades
2. Strength ratings
3. Surface ratings
4. Test samples for a laboratory furniture range or
system
5. Determination of performance rating for surface
penetration and assessment of tool blunting
propensity
6. Determination of performance rating for impact
7. Determination of performance rating for wet and dry
heat
8. Test chemicals and their concentrations
9. Determination of performance rating for surface
resistance to cold liquids
10. Determination of performance rating for adhesion
of paints and lacquers to substrates
11. Determination of performance rating for resistance
to surface heating
12. Determination of performance rating for adhesion
of edging material to substrate
13. Determination of performance rating for ease of
worktop and work surface renovation
14. Determination of performance rating for accidental
instrument damage propensity
Figures
1. Typical support system test assembly arrangement
2. Typical layout of surface penetration (tool blunting
propensity) test machine
3. Details of scraper blade (surface penetration test)
4. Details of scraper blade holder (surface penetration
test)
5. Details of scraper blade clamp (surface penetration
test)
6. Electrically-heated stainless steel block (wet and
dry heat tests)
7. Aluminium alloy cap for electrically-heated block
(wet and dry heat tests)
8. Viewing cabinet (wet and dry heat and cold liquids
tests)
9. Details of test blade for adhesion of paints and
lacquers to substrates test (cross cut test)
10. Details of test template for adhesion of paints and
lacquers to substrates test (cross cut test)
11. Details of test blade holder for adhesion of paints
and lacquers to substrates test (cross cut test)
12. Diagrammatic scheme for 180 deg peel test for a
flexible-to-rigid assembly
13. Typical peeling trace
14. Tool for bond quality test
15. Free-fall large ball impact test apparatus for
assessment of accidental instrument damage
propensity
Specifies strength and stability of laboratory furniture and performance of exposed surfaces for three grades of severity in use. Includes manufacturing dimensional tolerances and test methods. Does not deal with ancillary spaces and specialised laboratories.
Committee |
LBI/1/1
|
DevelopmentNote |
Supersedes BS 3202(1959) and 90/55171 DC (07/2005)
|
DocumentType |
Standard
|
Pages |
52
|
PublisherName |
British Standards Institution
|
Status |
Current
|
SupersededBy | |
Supersedes |
BS 3202-1:1991 | Laboratory furniture and fittings Introduction |
BS 3202-4:1991 | Laboratory furniture and fittings Recommendations for installation |
BS 3202-3:1991 | Laboratory furniture and fittings Recommendations for design |
BS 5910-1:1980 | Methods of test for surface finishes for furniture Assessment of surface resistance to cold liquids |
BS 240:1986 | Method for Brinell hardness test and for verification of Brinell hardness testing machines |
BS 871:1981 | Specification for abrasive papers and cloths |
BS 4F 118:1990 | Specification for 50 g/m<sup>2</sup> nylon parachute fabric |
BS 7258-1:1990 | Laboratory fume cupboards Specification for safety and performance |
BS 4875-6:1985 | Strength and stability of furniture Methods for determination of stability of tables and trolleys |
BS 3962-6:1980 | Methods of test for finishes for wooden furniture Assessment of resistance to mechanical damage |
BS 4875-8:1985 | Strength and stability of furniture Methods for determination of stability of storage furniture |
BS 3202-4:1991 | Laboratory furniture and fittings Recommendations for installation |
BS 3202-3:1991 | Laboratory furniture and fittings Recommendations for design |
BS 7258-4:1994 | Laboratory fume cupboards Method for determination of the containment value of a laboratory fume cupboard |
BS 3962-3:1983 | Methods of test for finishes for wooden furniture Assessment of surface resistance to dry heat |
BS 4875-7:1985 | Strength and stability of furniture Methods for determination of strength of storage furniture |
BS 903-A26:1969 | Physical testing of rubber Determination of hardness |
BS 3900-F2:1973 | Methods of test for paint. Durability tests on paint films Determination of resistance to humidity (cyclic condensation) |
BS 3202-1:1991 | Laboratory furniture and fittings Introduction |
BS 4965:1991 | Specification for decorative laminated plastics sheet veneered boards and panels |
BS 7258-3:1990 | Laboratory fume cupboards Recommendations for selection, use and maintenance |
BS 3962-2:1983 | Methods of test for finishes for wooden furniture Assessment of surface resistance to wet heat |
BS 6250-3:1991 | Domestic and contract furniture Specification for performance requirements for cabinet furniture |
BS 7258-2:1990 | Laboratory fume cupboards Recommendations for the exchange of information and recommendations for installation |
BS 5295-4:1989 | Environmental cleanliness in enclosed spaces Specification for monitoring clean rooms and clean air devices to prove continued compliance with BS 5295:Part 1 |
BS 4247-1:1981 | Surface materials for use in radioactive areas Methods of measuring and evaluating the decontamination factor |
BS 6001(1972) : AMD 5054 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - SPECIFICATION FOR SAMPLING PLANS INDEXED BY ACCEPTABLE QUALITY LEVEL (AQL) FOR LOT - BY - LOT INSPECTION |
BS 4247-2:1982 | Surface materials for use in radioactive areas Guide to the selection of materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.