BS 4486:1980
Current
The latest, up-to-date edition.
Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
Hardcopy , PDF
English
31-03-1980
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Cooperating organizations
Specifications
1. Scope
2. References
3. Definitions
4. Designations for enquiry and order purposes
5. Manufacture
6. Mass of processed bar tendons
7. Dimensions and properties
8. Periodic tests
9. Routine testing and inspection
Table
1. Dimensions and properties of hot rolled and hot
rolled and processed high tensile alloy steel bars
Requirements for preferred sizes for smooth or ribbed alloy steel bars in straight lengths supplied in either hot rolled or hot rolled and processed conditions. Two nominal strength levels, 835 N/mm2 and 1080 N/mm2 subject to the processed condition.
| Committee |
ISE/104
|
| DevelopmentNote |
Supersedes 78/77731 DC and 87/37400 DC (02/2004) Reviewed and confirmed by BSI, November 2012. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This British Standard specifies requirements for preferred sizes of smooth or ribbed alloy steel bars in straight lengths supplied in the hot rolled or hot rolled and processed conditions. Two nominal strength levels of steel are specified. This standard does not specify fatigue testing, this subject being included in BS 4447. Stress-corrosion testing is not specified.
| Standards | Relationship |
| UNE-EN 12921-3:2005+A1:2009 | Identical |
| EURONORM 138 : 1979 | Similar to |
| ACI 376 : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY |
| DD ENV 1992-1.1 : DRAFT MAY 1992 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES FOR BUILDINGS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
| BS CP102(1973) : 1973 | CODE OF PRACTICE FOR PROTECTION OF BUILDINGS AGAINST WATER FROM THE GROUND |
| BS 5400-7:1978 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 7: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, CONCRETE, REINFORCEMENT AND PRESTRESSING TENDONS |
| BS 5628-2:1995 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
| BS 5628-2:2000 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS 4975:1990 | Specification for prestressed concrete pressure vessels for nuclear engineering |
| BS 8110-1:1997 | Structural use of concrete Code of practice for design and construction |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| BS EN 13670:2009 | Execution of concrete structures |
| BS 5896:1980 | Specification for high tensile steel wire and strand for the prestressing of concrete |
| BS 5061:1974 | Specification for cylindrical forage tower silos and recommendations for their use |
| DD ENV 1996-1.1 : DRAFT DEC 1996 | EUROCODE 6: DESIGN OF MASONRY STRUCTURES - GENERAL RULES FOR BUILDINGS - GENERAL RULES FOR BUILDINGS - RULES FOR REINFORCED AND UNREINFORCED MASONRY (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
| ACI 376M : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES (METRIC) |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| EEMUA 147 : 2016 | RECOMMENDATIONS FOR REFRIGERATED LIQUEFIED GAS STORAGE TANKS |
| I.S. EN 13670:2009 | EXECUTION OF CONCRETE STRUCTURES |
| BS 7777-3:1993 | Flat-bottomed, vertical, cylindrical storage tanks for low temperature service Recommendations for the design and construction of prestressed and reinforced concrete tanks and tank foundations, and for the design and installation of tank insulation, tank liners and tank coatings |
| EN 13670:2009 | Execution of concrete structures |
| I.S. EN 13670 NATIONAL ANNEX:2015 | IRISH NATIONAL ANNEX TO I.S. EN 13670:2009 - EXECUTION OF CONCRETE STRUCTURES |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| BS 8081:1989 | Code of practice for ground anchorages |
| BS 5400-4:1990 | Steel, concrete and composite bridges Code of practice for design of concrete bridges |
| BS 5896:1980 | Specification for high tensile steel wire and strand for the prestressing of concrete |
| BS 2846-4:1976 | Guide to statistical interpretation of data Techniques of estimation and tests relating to means and variances |
| BS 2846-3:1975 | Guide to statistical interpretation of data Determination of a statistical tolerance interval |
| BS 4447:1973 | Specification for the performance of prestressing anchorages for post-tensioned construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.