BS 5306-4(2001) : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 4: SPECIFICATION FOR CARBON DIOXIDE SYSTEMS
Hardcopy , PDF
30-04-2020
English
01-01-2001
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Characteristics and uses of carbon dioxide
5 Types of system
6 Planning
7 Specifications, plans and approvals
8 Commissioning and acceptance
9 Inspection, maintenance, testing and training
10 Total flooding systems
11 Local application systems
12 Manual hose systems
13 System components
14 System operation
15 Safety precautions
16 Carbon dioxide supply
17 Quantity of carbon dioxide
18 Storage containers
19 Pipework
20 Installation of pipework
21 Marking of pipework
Annex A (normative) - Door fan test for determination
of minimum hold time
Annex B (informative) - Service schedule
Annex C (normative) - Determination of carbon dioxide
concentrations for flammable liquids and gases
Annex D (informative) - Examples of calculation of
carbon dioxiderequirements
Annex E (informative) - Determination of carbon
dioxide pipe and orifice size
Bibliography
Describes requirements and gives recommendations for the provision of carbon dioxide fire extinguishing systems in buildings or industrial plant.
Committee |
FSH/18/6
|
DevelopmentNote |
Supersedes BS 5306-4(1986) and 00/541249 DC. (08/2001) 2001 Edition Re-Issued in April 2012 & incorporates AMD 1 2012. Supersedes 11/30244843 DC. (04/2012)
|
DocumentType |
Standard
|
Pages |
76
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
BS 381C:1996 | Specification for colours for identification, coding and special purposes |
BS 476-23:1987 | Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure |
BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
BS 7354:1990 | Code of practice for design of high-voltage open-terminal stations |
BS 2051-1:1973 | Tube and pipe fittings for engineering purposes Copper and copper alloys capillary and compression tube fittings for engineering purposes |
BS 1710:1984 | Specification for identification of pipelines and services |
BS 1821:1982 | Specification for class I oxy-acetylene welding of ferritic steel pipework for carrying fluids |
BS 1640-3:1968 | Specification for steel butt-welding pipe fittings for the petroleum industry Wrought carbon and ferritic alloy steel fittings. Metric units |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
BS EN 1435:1997 | Non-destructive examination of welds. Radiographic examination of welded joints |
BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
API 5L : 2012 | LINE PIPE |
BS EN 1759-1:2004 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
BS 7273-1:2006 | Code of practice for the operation of fire protection measures Electrical actuation of gaseous total flooding extinguishing systems |
BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
BS EN 1968:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders |
BS 476-21:1987 | Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction |
BS 2051-2:1984 | Tube and pipe fittings for engineering purposes Specification for olive type copper alloy compression tube fittings |
BS EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads Taper external threads and taper internal threads. Dimensions, tolerances and designation |
BS EN 10241:2000 | Steel threaded pipe fittings |
BS 1600:1991 | Specification for dimensions of steel pipe for the petroleum industry |
BS 7273-2:1992 | Code of practice for the operation of fire protection measures Mechanical actuation of gaseous total flooding and local application extinguishing systems |
BS EN 13096:2003 | Transportable gas cylinders. Conditions for filling gases into receptacles. Single component gases |
BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
BS EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads Taper external threads and parallel internal threads. Dimensions, tolerances and designation |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
BS EN 1964-1:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an <i>R</i><sub>m</sub> value of less than 1100 MPa |
ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
BS EN 25923:1994 | Fire extinguishing media Carbon dioxide |
BS 3410:1961 | Specification for metal washers for general engineering purposes |
BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 2:1992 | Classification of fires |
BS EN 10255:2004 | Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
BS EN 1515-1:2000 | Flanges and their joints. Bolting Selection of bolting |
BS EN 10242:1995 | Threaded pipe fittings in malleable cast iron |
BS 4320:1968 | Specification for metal washers for general engineering purposes. Metric series |
BS 476-22:1987 | Fire tests on building materials and structures Methods for determination of the fire resistance of non-loadbearing elements of construction |
BS EN 1964-3:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an <i>R</i><sub>m</sub> value of less than 1 100 MPa |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.