BS 6073-1:1981
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Precast concrete masonry units Specification for precast concrete masonry units
Hardcopy , PDF
01-12-2005
English
29-08-2003
Cooperating organizations
Foreword
1 Scope
2 References
3 Definitions
4 Binders and binder constituents
5 Aggregates
6 Admixtures
7 Chloride content
8 External shell thickness of blocks
9 Dimensional deviations
10 Strength
11 Drying shrinkage
12 Certificate of compliance
13 Independent testing
14 Identification of masonry units
Appendices
A Measurement of dimensions
B Determination of compressive strength
C Determination of transverse strength
D Determination of drying shrinkage
Figures
Table
Publications referred to
Specifies materials, tolerances and minimum performance levels for precast concrete masonry units (blocks and bricks). Appendices give methods of measuring dimensions and determining strength and drying shrinkage.
Committee |
B/519/1
|
DevelopmentNote |
Supersedes BS 1180(1972), BS 2028,1364(1968), 02/103022 DC and 79/10450 DC. (09/2003)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
BS 5628-2:1985 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
BS 1289-1:1986 | Flue blocks and masonry terminals for gas appliances Specification for precast concrete flue blocks and terminals |
BS 5080-2:1986 | Structural fixings in concrete and masonry Method for determination of resistance to loading in shear |
BS DD9999(2005) : 2005 | CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS |
BS 4729:1990 | Specification for dimensions of bricks of special shapes and sizes |
BS 6150:1991 | Code of practice for painting of buildings |
BS 5395-2:1984 | Stairs, ladders and walkways Code of practice for the design of helical and spiral stairs |
BS 8000-3:1989 | Workmanship on building sites Code of practice for masonry |
BS 6461-1:1984 | Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for masonry chimneys and flue pipes |
04/30104570 DC : DRAFT APR 2004 | BS 8103-2 - STRUCTURAL DESIGN OF LOW RISE BUILDINGS - PART 2: CODE OF PRACTICE FOR MASONRY WALLS FOR HOUSING |
BS 5628-2:1995 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
BS 5628-2:2000 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
BS 1217:1997 | Specification for cast stone |
BS 1217:1986 | Specification for cast stone |
BS 5080-1:1993 | Structural fixings in concrete and masonry Method of test for tensile loading |
BS 5628-1:1992 | Code of practice for use of masonry Structural use of unreinforced masonry |
BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
BS 187:1978 | Specification for calcium silicate (sandlime and flintlime) bricks |
BS 3797:1990 | Specification for lightweight aggregates for masonry units and structural concrete |
BS 6178-1:1990 | Joist hangers Specification for joist hangers for building into masonry walls of domestic dwellings |
BS 5839-5:1988 | Fire detection and alarm systems for buildings Specification for optical beam smoke detectors |
DD ENV 1996-1.1 : DRAFT DEC 1996 | EUROCODE 6: DESIGN OF MASONRY STRUCTURES - GENERAL RULES FOR BUILDINGS - GENERAL RULES FOR BUILDINGS - RULES FOR REINFORCED AND UNREINFORCED MASONRY (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
BS 8002:1994 | Code of practice for earth retaining structures |
BS 8103-2:1996 | Structural design of low-rise buildings Code of practice for masonry walls for housing |
BS 5606:1978 | Code of practice for accuracy in building |
05/30095368 DC : DRAFT FEB 2005 | BS 6150 - PAINTING OF BUILDINGS - CODE OF PRACTICE |
05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
DD ENV 1996-1.2 : DRAFT NOV 1997 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
BS 6073-2:1981 | Precast concrete masonry units Method for specifying precast concrete masonry units |
BS 6779-4:1999 | Highway parapets for bridges and other structures Specification for parapets of reinforced and unreinforced masonry construction |
BS 8301:1985 | Code of practice for building drainage |
BS 6349-1:1984 | Maritime structures General criteria |
BS 6150:1982 | Code of practice for painting of buildings |
BS 8103-2:2005 | Structural design of low rise buildings Code of practice for masonry walls for housing |
BS 5268-6.2(2001) : 2001 | STRUCTURAL USE OF TIMBER - PART 6: CODE OF PRACTICE FOR TIMBER FRAME WALLS - SECTION 6.2: BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING FOUR STOREYS |
BS 6178-1:1982 | Joist hangers Specification for joist hangers for building into masonry walls of domestic dwellings |
BS 6457:1984 | Specification for reconstructed stone masonry units |
BS 5080-1:1974 | Methods of test for structural fixings in concrete and masonry Tensile loading |
08/30154716 DC : DRAFT DEC 2008 | BS 5268-6-2 AMD1 - STRUCTURAL USE OF TIMBER - PART 6-2: CODE OF PRACTICE FOR TIMBER FRAME WALLS - BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING 4 STOREYS |
BS 6543(1985) : 1985 | GUIDE TO USE OF INDUSTRIAL BY-PRODUCTS AND WASTE MATERIALS IN BUILDING AND CIVIL ENGINEERING |
BS 5628-3:1985 | Code of practice for use of masonry Materials and components, design and workmanship |
BS 882:1992 | Specification for aggregates from natural sources for concrete |
BS 3718:1964 | Specification for laboratory humidity ovens (non-injection type) |
BS 1881-6:1971 | Methods of testing concrete Analysis of hardened concrete |
BS 1165:1985 | Specification for clinker and furnace bottom ash aggregates for concrete |
BS 3123:1959 | Specification for spring calipers and spring dividers |
BS 5075-1:1982 | Concrete admixtures Specification for accelerating admixtures, retarding admixtures and water reducing admixtures |
BS 877-2:1973 | Specification for foamed or expanded blastfurnace slag lightweight aggregate for concrete. Metric units |
BS 4551:1980 | Methods of testing mortars, screeds and plasters |
BS 1014:1975 | Specification for pigments for Portland cement and Portland cement products |
BS 915-2:1972 | Specification for high alumina cement Metric units |
BS 915:1947 | High alumina cement |
BS 1134:1961 | Centre-line-average height method for the assessment of surface texture |
BS 970(1972) : LATEST | |
BS 3892:1965 | Pulverized fuel ash for concrete |
BS 3587:1963 | Specifications for calcium chloride (technical) |
BS 3898:1965 | Specification for laboratory humidity ovens (injection type) |
BS 5078:1974 | Specification for jig and fixture components |
BS 4550-2:1970 | Methods of testing cement Chemical tests |
BS 1881-5:1970 | Testing concrete Methods of testing hardened concrete for other than strength |
BS 6457:1984 | Specification for reconstructed stone masonry units |
BS 877(1967) : LATEST | |
BS 427-1:1961 | Method for Vickers hardness test Testing of metals |
BS 3797-2:1976 | Pulverized-fuel ash Metric units |
BS 3892-3:1997 | Pulverized-fuel ash Specification for pulverized-fuel ash for use in cementitious grouts |
BS 3892-2:1996 | Pulverized-fuel ash Specification for pulverized-fuel ash to be used as a Type I addition |
BS 427:1990 | Method for Vickers hardness test and for verification of Vickers hardness testing machines |
BS 6073-2:1981 | Precast concrete masonry units Method for specifying precast concrete masonry units |
BS 146-2:1973 | Specification for Portland-blastfurnace cement. Metric units |
BS 4027:1996 | Specification for sulfate-resisting Portland cement |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.