BS 669-1:1989
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Flexible hoses, end fittings and sockets for gas burning appliances Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
Hardcopy , PDF
28-01-2022
English
31-01-1990
Important note : Users cannot be edited or removed once added to your Multi user PDF.Minimum type test requirements, and strength and performance tests on end fitting assemblies.
| Committee |
GSE/42
|
| DevelopmentNote |
Supersedes BS 669-1(1984) & 88/74741 DC. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Part of BS 669 specifies type test requirements for strip-wound metallic flexible hoses, covers, end fittings and sockets for use with domestic cookers and appliances burning 1st and 2nd family gases at a nominal inlet pressure of 20 mbar*.
The requirements for strip-wound flexible hoses with end fittings attached are specified in section two. Section three specifies additional requirements for the end fittings and sockets.
NOTE. The titles of the publications referred to in this standard are listed on the inside back cover.
| EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| UNI EN 14800 : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS |
| BS 6172:2004 | Installation and maintenance of domestic gas cooking appliances (2nd and 3rd family gases). Specification |
| BS 5871-4:2007 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Independent gas-fired flueless fires, convector heaters and heating stoves of nominal heat input not exceeding 6 kW (2nd and 3rd family gases) |
| BS 5258-17:1992 | Safety of domestic gas appliances Specification for direct gas-fired tumble dryers (2nd and 3rd family gases) |
| BS 8446:2005 | Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS 6172(2010) : 2010 | SPECIFICATION FOR INSTALLATION, SERVICING AND MAINTENANCE OF DOMESTIC GAS COOKING APPLIANCES (2ND AND 3RD FAMILY GASES) |
| BS 6891:2015 | Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises |
| BS 669-2:1997 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases |
| BS 7624:2004 | Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW heat input (2nd and 3rd family gases). Specification |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS 6891:1998 | Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas) |
| BS 6501-2:1991 | Flexible metallic hose assemblies Specification for strip wound hoses and hose assemblies |
| PD 5482-3:2005 | Code of practice for domestic butane and propane gas-burning installations Installations in boats, yachts and other vessels |
| BS 6891(2005) : 2005 | INSTALLATION OF LOW PRESSURE GAS PIPEWORK OF UP TO 35 MM (R1[1/4]) IN DOMESTIC PREMISES (2ND FAMILY GAS) - SPECIFICATION |
| BS 7624:1993 | Specification for installation of domestic direct gas-fired tumble dryers of up to 3kW heat input (2nd and 3rd family gases) |
| PD 54823:2016 | Guidance for the design, commissioning and maintenance of LPG systems in small craft |
| DIN EN 14800:2007-06 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| I.S. 813:2014 | DOMESTIC GAS INSTALLATIONS (EDITION 3) AND AMENDMENT 1:2017 |
| I.S. 327:1990 | DOMESTIC INSTALLATIONS USING LIQUEFIED PETROLEUM GASES |
| I.S. 813:2014+A1:2017 | DOMESTIC GAS INSTALLATIONS (EDITION 3) AND AMENDMENT 1:2017 |
| BS CP335-1(1973) : 1973 | CODE OF PRACTICE FOR SELECTION AND INSTALLATION OF MISCELLANEOUS TOWN GAS APPLIANCES - DOMESTIC LAUNDERING AND MISCELLANEOUS APPLIANCES |
| BS 1179-6:1980 | Glossary of terms used in the gas industry Combustion and utilization including installation at consumers\' premises |
| BS 3673-1:1968 | Specification for spring retaining rings Carbon steel circlips |
| BS 903-A43:1982 | Methods of testing vulcanized rubber. Determination of resistance to ozone cracking (static strain test) |
| BS 5750-2:1987 | Quality systems Specification for production and installation |
| BS 2056:1991 | Specification for stainless steel wire for mechanical springs |
| BS 903-A26:1969 | Physical testing of rubber Determination of hardness |
| BS 6172:2004 | Installation and maintenance of domestic gas cooking appliances (2nd and 3rd family gases). Specification |
| BS CP334-3(1971) : 1971 | SELECTION AND INSTALLATION OF TOWN GAS COOKING AND REFRIGERATING APPLIANCES - REFRIGERATORS |
| BS 4781:1990 | Specification for pressure-sensitive adhesive plastics labels for permanent use |
| BS 903-A2:1989 | Physical testing of rubber Determination of tensile stress-strain properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.