![header thumbnail](/images/publishers\bsi_cover.gif)
BS 6891:2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
![header thumbnail](/images/publishers\bsi_cover.gif)
Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises
Hardcopy
18-07-2019
English
30-11-2015
1 Scope
2 Normative references
3 Terms and definitions
4 Competence
5 Design and planning
6 Materials and components
7 Jointing
8 Installation
9 Installation of flexible hoses, tubing,
assemblies and their connections
10 Commissioning
11 Maintenance
Annexes
Annex A (informative) - Guide to sizing pipework installations
Annex B (informative) - Sulfidation of natural gas installations
Annex C (informative) - Summary and principal conclusions of
the Advantica Research Project, Gas in intermediate floors,
Report Number 6699
Annex D (informative) - Protected area
Annex E (normative) - LPG Final stage regulator and safety
devices
Annex F (informative) - Dangerous Substances and Explosive
Atmospheres Regulations [17], [18]
Bibliography
Describes the design, installation, commissioning and maintenance of gas installation pipework carrying 2nd and 3rd family gas of up to 35 mm (R 1[1/2]) on premises, including residential park homes (2nd and 3rd family gas) and caravan holiday homes (2nd family gas).
Committee |
GSE/30
|
DevelopmentNote |
Supersedes BS 6891(2005) & 13/30199128 DC. Partially supersedes BS 5482-1(2005). (11/2015)
|
DocumentType |
Standard
|
Pages |
102
|
PublisherName |
British Standards Institution
|
Status |
Withdrawn
|
BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
BS EN 437 : 2003 | TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES |
BS EN ISO 10380:2012 | Pipework. Corrugated metal hoses and hose assemblies |
BS EN 1949 : 2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
BS 3016:1989 | Specification for pressure regulators for liquefied petroleum gases |
BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
BS EN ISO 10239:2017 | Small craft. Liquefied petroleum gas (LPG) systems |
BS EN 1763-1:2001 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses |
BS 1710:1984 | Specification for identification of pipelines and services |
BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
BS EN 751-2:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Non-hardening jointing compounds |
BS EN 1555-3 : 2010 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
BS EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
BS EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes |
BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
BS EN 13786 : 2004 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
BS 6400-2:2006 | Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m<sup>3</sup>/h Medium pressure (2nd family gases) |
BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
PD 5482-3:2005 | Code of practice for domestic butane and propane gas-burning installations Installations in boats, yachts and other vessels |
BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
BS 6400-3:2007 | Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m<sup>3</sup>/h Low and medium pressure (3rd family gases) |
BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
BS EN 1044:1999 | Brazing. Filler metals |
BS EN 14324:2004 | Brazing. Guidance on the application of brazed joints |
BS EN 13349:2002 | Copper and copper alloys. Pre-insulated copper tubes with solid covering |
BS EN 29453:1994 | Soft solder alloys. Chemical compositions and forms |
BS 5482-2:1977 | Domestic butane- and propane-gas-burning installations Installations in caravans and non-permanent dwellings |
BS 1494-1:1964 | Specification for fixing accessories for building purposes Fixings for sheet, roof and wall coverings |
BS 6173:2009 | Specification for installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases) |
ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
BS EN 751-3:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Unsintered PTFE tapes |
BS EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
BS 7838:1996 | Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50 |
BS EN 10241:2000 | Steel threaded pipe fittings |
BS 3632:2005 | Residential park homes. Specification |
BS EN 1775:2007 | Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
BS EN 751-1:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Anaerobic jointing compounds |
BS EN 13785 : 2005 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
BS EN 1254-5:1998 | Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes |
BS EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads Taper external threads and parallel internal threads. Dimensions, tolerances and designation |
BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
BS 3212:1991 | Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
BS 5114:1975 | Specification for performance requirements for joints and compression fittings for use with polyethylene pipes |
BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
BS EN 1254-4:1998 | Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends |
BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 12864 : 2001 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
BS EN 10255:2004 | Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
BS 8537:2010 | Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes |
BS EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
BS EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads Dimensions, tolerances and designation |
BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
BS EN 1254-1:1998 | Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes |
BS 669-1:1989 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases |
BS 669-2:1997 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.