BS EN 10143:2006
Current
The latest, up-to-date edition.
Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape
Hardcopy , PDF
English
31-07-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Condition of delivery
6 Tolerances on thickness
7 Tolerances on width
7.1 General
7.2 Sheet and wide strip of width >= 600 mm
7.3 Slit wide strip of width less than 600 mm
8 Tolerances on length
9 Tolerances on flatness
9.1 Steel grades with specified minimum R[e] or R[p0,2] < 360 MPa
9.2 Steel grades with specified minimum R[p0,2] >= 360 MPa
10 Tolerances on out-of-squareness
11 Tolerances on edge camber
12 Superimposition of dimensions
Bibliography
Applies to continuously zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ) and aluminium-silicon alloy (AS) hot-dip coated flat products made of low carbon and high strength steels for cold forming and of structural steels with a minimum thickness of 0,20 mm and a maximum thickness of 6,50 mm.
Committee |
ISE/109
|
DevelopmentNote |
Supersedes BS 2989(1992) and 91/43188 DC. (07/2005) Supersedes 04/30117571 DC (07/2006)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 10143 : 2006 | Identical |
NBN EN 10143 : 2006 | Identical |
EN 10143:2006 (edition 2) | Identical |
UNI EN 10143 : 2006 | Identical |
I.S. EN 10143:2006 | Identical |
NF EN 10143 : 2006 | Identical |
NEN EN 10143 : 2006 | Identical |
UNE-EN 10143:2007 | Identical |
NS EN 10143 : 2ED 2006 | Identical |
05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
15/30095322 DC : 0 | BS 5427 - CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
BS 8525-1:2010 | Greywater systems Code of practice |
BS 5516-1:2004 | Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing |
08/30171875 DC : DRAFT JUNE 2008 | BS 8515 - CODE OF PRACTICE FOR RAINWATER HARVESTING SYSTEMS |
BS 5502-50(1993) : 1993 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 50: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND USE OF STORAGE TANKS AND RECEPTION PITS FOR LIVESTOCK SLURRY |
BS 5502-22:1993 | Buildings and structures for agriculture Code of practice for design, construction and loading |
BS 5502-21:1990 | Buildings and structures for agriculture Code of practice for selection and use of construction materials |
BS 8515(2009) : 2009 | RAINWATER HARVESTING SYSTEMS - CODE OF PRACTICE |
BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
BS 5991:2006 | Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
BS 6180:1999 | Barriers in and about buildings. Code of practice |
BS 4592-3:2006 | Industrial type flooring and stair treads Cold formed metal planks. Specification |
BS 2482:2009 | Specification for timber scaffold boards |
BS 6180:2011 | Barriers in and about buildings. Code of practice |
BS 5990:2006 | Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
BS 4008:2006 | Specification for cattle grids |
BS 6180:1995 | Code of practice for barriers in and about buildings |
08/30113948 DC : 0 | BS 2482 - SPECIFICATION FOR TIMBER SCAFFOLD BOARDS |
05/30095368 DC : DRAFT FEB 2005 | BS 6150 - PAINTING OF BUILDINGS - CODE OF PRACTICE |
06/30094364 DC : DRAFT JAN 2006 | BS 4592-3 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 3: COLD FORMED METAL PLANKS - SPECIFICATION |
09/30184122 DC : 0 | BS 8525-1 - GREYWATER SYSTEMS - PART 1: CODE OF PRACTICE |
10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
DEFSTAN 03-32(PT4)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
EN 10079:2007 | Definition of steel products |
EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.