BS EN 1036-1:2007
Current
The latest, up-to-date edition.
Glass in building. Mirrors from silver-coated float glass for internal use Definitions, requirements and test methods
Hardcopy , PDF
English
31-03-2009
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
4.1 Glass products
4.2 Reflective coating
4.3 Protective coating(s)
5 Dimensional requirements
5.1 Thickness
5.2 Length, width and squareness
5.2.1 Stock/standard sizes
5.2.2 As-cut finished sizes
6 Reflection characteristics of silvered mirrors
6.1 Measurement
6.2 Silvered mirrors made from clear float glass
6.3 Silvered mirrors made from tinted float glass
7 Quality requirements
7.1 General
7.2 Quality assessment and inspection methods
for silvered mirrors
7.2.1 Glass, reflective coating, edge and protective
coating quality
7.2.2 Optical quality
7.3 Acceptance levels
7.3.1 Glass faults
7.3.2 Reflective silver coating faults
7.3.3 Edge faults
7.3.4 Protective coating(s) faults
7.3.5 Optical fault
8 Testing of silvered mirror
8.1 Durability
8.1.1 General
8.1.2 Test specimens
8.1.3 Position of specimens
8.1.4 Evaluation
8.1.5 Acceptance criteria
8.2 Protective coating(s) adhesion
Annex A (normative) - Condensation water test in
constant atmosphere
A.1 General
A.2 Test conditions
A.3 Climatic testing device
A.3.1 Climatic chamber
A.3.2 Installation of the climatic chamber
A.3.3 Device for the accommodation of the
specimens (specimen holder)
A.4 Procedure
A.4.1 Filling the floor trough
A.4.2 Specimens
A.4.3 Arrangement of the specimens
A.4.4 Test sequence
A.4.5 End of test
A.4.6 Interruption
A.4.7 Cleaning procedure
A.5 Test report
Annex B (informative) - Fixing and cleaning of mirrors
B.1 General
B.2 Factors affecting durability
B.3 Factors affecting image distortion
Bibliography
Describes minimum quality requirements (in respect of optical, visual and edge faults) and durability tests for mirrors from silvered float glass for internal use in building.
Committee |
B/520
|
DevelopmentNote |
Supersedes BS EN 1036. (03/2009)
|
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies minimum quality requirements (in respect of optical, visual and edge faults) and durability tests for mirrors from silvered float glass for internal use in building. This European Standard applies only to mirrors from silvered glass manufactured from flat annealed clear or tinted float glass, 2 mm to 10 mm thickness, and supplied in stock/standard sizes and as-cut finished sizes. This European Standard does not apply to mirrors from silvered glass manufactured from any basic glass other than float glass, any processed glass, i.e. thermally toughened safety glass, heat strengthened glass, chemically strengthened glass and laminated glass, and any bent glass. For mirrors from silvered glass used in aggressive and/or constantly high humidity atmospheres, e.g. horse riding halls, swimming pools, medical baths, saunas etc. this European Standard is not applicable. This European Standard is not applicable to reflective glass for external glazing applications. This European Standard does not apply to framing, fixing or other support systems. NOTE Useful advice on these items is contained in the informative Annex B.
Standards | Relationship |
EN 1036-1:2007 | Identical |
BS 6465-4:2010 | Sanitary installations Code of practice for the provision of public toilets |
10/30177388 DC : 0 | BS 6465-4 - SANITARY INSTALLATIONS - PART 4: CODE OF PRACTICE FOR THE PROVISION OF PUBLIC TOILETS |
BS 6262-1:2017 | Glazing for buildings General methodology for the selection of glazing |
EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN 572-2:2012 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
EN 572-8:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.