BS EN 12259-5:2002
Current
The latest, up-to-date edition.
Fixed firefighting systems. Components for sprinkler and water spray systems Water flow detectors
Hardcopy , PDF
English
04-12-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction and performance
4.1 General
4.2 Connections
4.3 Rated working pressure
4.4 Components
4.5 Clearances
4.6 Operation
4.7 Corrosion resistance
4.8 Pressure loss due to hydraulic friction
4.9 Leak resistance
4.10 Endurance
4.11 Maintenance
5 Marking
6 Instruction for installation and operation
7 Evaluation of conformity
7.1 General
7.2 Initial type testing
7.3 Factory production control (FPC)
Annex A (normative) Verification of connection dimension test
Annex B (normative) Pressurisation strength test
Annex C (normative) Resistance to ageing test for non-metallic
components (excluding gaskets and seals)
C.1 Air oven ageing
C.2 Warm water ageing
Annex D (normative) Sealing elements test
D.1 Non-reinforced elastomeric seals
D.2 Reinforced elastomeric seals
Annex E (normative) Clearances tests
E.1 Press-fit brushing test
E.2 Pipework obstruction test
Annex F (normative) Operation tests
F.1 Sensitivity
F.2 Operational cycling
F.3 Temperature resistance
Annex G (normative) Salt mist corrosion resistance test
G.1 Reagents
G.2 Apparatus
G.3 Procedure
Annex H (normative) Hydraulic friction pressure loss test
Annex I (normative) Leakage resistance test
Annex J (normative) Endurance test
Annex K (informative) Typical testing schedule and example
of test specimen number of water flow detectors
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
Bibliography
Specifies requirements for construction and performance and tests for water flow detectors for use in wet pipe automatic sprinkler systems conforming to EN 12845.
| Committee |
FSH/18/2
|
| DevelopmentNote |
Supersedes 99/540205 DC (12/2002) Also available as a part of BS KIT 126. (06/2004)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 12259-5:2003 | Identical |
| SN EN 12259-5 : 2002 | Identical |
| NF EN 12259-5 : 2003 | Identical |
| NS EN 12259-5 : 1ED 2002 | Identical |
| NBN EN 12259-5 : 2002 | Identical |
| I.S. EN 12259-5:2002 | Identical |
| EN 12259-5:2002 | Identical |
| UNI EN 12259-5 : 2003 | Identical |
| NEN EN 12259-5 : 2002 | Identical |
| DIN EN 12259-5:2002-12 | Identical |
| BS 8524-2:2013 | Active fire curtain barrier assemblies Code of practice for application, installation and maintenance |
| 12/30205676 DC : 0 | BS 8524-2 - ACTIVE FIRE CURTAIN BARRIER ASSEMBLIES - PART 2: CODE OF PRACTICE |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| IEC 61020-6:1991 | Electromechanical switches for use in electronic equipment - Part 6: Sectional specification for sensitive switches |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.