EN ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010)
|
EN 12269-1:2000
|
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test
|
EN ISO 10456:2007/AC:2009
|
BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
|
ISO 354:2003
|
Acoustics — Measurement of sound absorption in a reverberation room
|
EN ISO 10140-5:2010/A1:2014
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010)
|
ISO 10140-2:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation
|
ISO 12491:1997
|
Statistical methods for quality control of building materials and components
|
EN 15361:2007
|
Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
|
ISO 717-2:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
|
EN 680 : 2005
|
DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE
|
EN 15304:2010
|
Determination of the freeze-thaw resistance of autoclaved aerated concrete
|
EN 1739:2007
|
Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
|
EN 1740:1998
|
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
|
EN 678:1993
|
Determination of the dry density of autoclaved aerated concrete
|
EN ISO 10140-4:2010
|
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
|
ISO 10140-1:2016
|
Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products
|
EN ISO 717-2:2013
|
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
|
EN 1745:2012
|
Masonry and masonry products - Methods for determining thermal properties
|
EN ISO 10140-1:2016
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016)
|
EN 13501-2:2016
|
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
|
EN 10080:2005
|
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
|
EN 14388:2015
|
Road traffic noise reducing devices - Specifications
|
EN 679:2005
|
Determination of the compressive strength of autoclaved aerated concrete
|
ISO 10140-4:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements
|
EN ISO 6946:2017
|
Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12)
|
EN 1991-1-2:2002/AC:2013
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
|
ISO 12572:2016
|
Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method
|
EN 12354-1:2000
|
Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms
|
EN 10088-5:2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
|
EN 772-16:2011
|
Methods of test for masonry units - Part 16: Determination of dimensions
|
EN ISO 12572:2016
|
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
|
EN 1353 : 1996
|
DETERMINATION OF MOISTURE CONTENT OF AUTOCLAVED AERATED CONCRETE
|
EN ISO 10140-3:2010/A1:2015
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010/AMD 1:2015)
|
EN 772-20:2000/A1:2005
|
METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MOSONRY UNITS
|
EN ISO 354:2003
|
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
|
EN 1742:1998
|
Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
|
EN 991:1995
|
Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
|
EN 1355:1996
|
Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
|
EN 12664:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
|
EN 1352:1996
|
Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
|
EN 1992-1-2:2004/AC:2008
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
|
ISO 4356:1977
|
Bases for the design of structures Deformations of buildings at the serviceability limit states
|
EN 1356:1996
|
Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load
|
EN 990:2002
|
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
|
EN ISO 10140-2:2010
|
Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010)
|
ISO 10456:2007
|
Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
|
ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire
|
EN 1793-1:2017
|
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
|
EN 1351:1997
|
Determination of flexural strength of autoclaved aerated concrete
|
ISO 717-1:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
|
EN 1996-1-2:2005/AC:2010
|
EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
|
EN 12269-2:2010
|
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test
|
EN 1741:1998
|
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
|
ISO 10140-3:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation
|
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
ISO 10140-5:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment
|
EN 1363-2:1999
|
Fire resistance tests - Part 2: Alternative and additional procedures
|
ISO 6946:2017
|
Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods
|
EN 1990:2002/A1:2005/AC:2010
|
EUROCODE - BASIS OF STRUCTURAL DESIGN
|
EN 1737:1998
|
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
|
EN 1738:1998
|
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
|
EN 989:1995
|
Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the "Push-Out" test
|
EN 206:2013+A1:2016
|
Concrete - Specification, performance, production and conformity
|
EN 12354-2:2000
|
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms
|
EN 1793-2:2012
|
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|