BS EN 12786:2013
Current
The latest, up-to-date edition.
Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards
Hardcopy , PDF
English
30-04-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Requirements for drafting the vibration clauses in
type-C standards
Annex A (informative) - Further guidance on comparative
vibration emission data
Annex B (informative) - Content of Directive 2006/42/EC
relevant to vibration
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
Provides guidance for the writers of harmonized type-C machinery safety standards on how to deal with vibration where hand-transmitted vibration and/or whole-body vibration is identified as a significant hazard.
Committee |
GME/21/6
|
DevelopmentNote |
Supersedes 97/703359 DC. (05/2005) Supersedes 12/30236576 DC. (04/2013)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard gives guidance for the writers of harmonized type-C machinery safety standards on how to deal with vibration where hand-transmitted vibration and/or whole-body vibration is identified as a significant hazard.
This European Standard also gives guidance on how to deal with the requirement for declaration of the vibration emission of portable hand-held and/or hand-guided machinery and for mobile machinery.
This European Standard supplements EN ISO 12100.
Standards | Relationship |
DIN EN 12786:2013-05 | Identical |
NS EN 12786 : 2013 | Identical |
NF EN 12786 : 2013 | Identical |
UNI EN 12786 : 2013 | Identical |
NBN EN 12786 : 2013 | Identical |
I.S. EN 12786:2013 | Identical |
NEN EN 12786 : 2013 | Identical |
SN EN 12786 : 2013 | Identical |
UNE-EN 12786:2013 | Identical |
EN 12786:2013 | Identical |
DEFSTAN 00-250(PT3)SEC13/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 13 - THE WORKPLACE |
DEFSTAN 00-250(PT3)SEC12/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 12 - OPERATIONS, MAINTENANCE & SUPPORT |
DEFSTAN 00-25(PT20)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 20: HEALTH HAZARD ASSESSMENT DOMAIN |
DEFSTAN 00-250(PT2)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 2: PARTICULAR PEOPLE-RELATED REQUIREMENTS |
DEFSTAN 00-250(PT3)SEC1-7/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTIONS 1-7 - OVERALL CONTENTS/SCOPE |
DEFSTAN 00-250(PT4)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 4: HFI METHOD, TOOLS AND TECHNIQUES |
DEFSTAN 00-250(PT3)SEC8/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 8 - PEOPLE IN SYSTEMS |
DEFSTAN 00-250(PT3)SEC14/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 14 - THE ENVIRONMENT |
DEFSTAN 00-250(PT3)SEC10/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 10 - SYSTEMS SAFETY |
DEFSTAN 00-250(PT3)SEC11/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 11 - TRAINING |
DEFSTAN 00-250(PT0)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 0: HUMAN FACTORS INTEGRATION |
DEFSTAN 00-250(PT3)SEC15/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 15 - WORK EQUIPMENT |
DEFSTAN 00-250(PT3)SEC16/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 16 - LIVING SPACES |
DEFSTAN 00-250(PT3)SEC9/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 9 - PEOPLE CHARACTERISTICS |
DEFSTAN 00-25(PT21)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 21: SYSTEM SAFETY DOMAIN |
DEFSTAN 00-250(PT1)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 1: OVERARCHING PEOPLE-RELATED REQUIREMENTS |
EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
CEN Guide 414:2017 | Safety of machinery - Rules for the drafting and presentation of safety standards |
EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
EN 14253:2003+A1:2007 | Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
CEN/TR 15172-1:2005 | Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
EN 30326-1:1994/A2:2011 | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:1992/AMD 2:2011) |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
CR 1030-2 : 1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE |
CR 1030-1 : 1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY |
EN ISO 5349-2:2001/A1:2015 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015) |
EN ISO 20643:2008/A1:2012 | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012) |
ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
EN ISO 5349-1 : 2001 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001) |
EN ISO 11689:1996/AC:2009 | Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007) |
EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
CEN/TR 15172-2:2005 | Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
ISO/TR 25398:2006 | Earth-moving machinery — Guidelines for assessment of exposure to whole-body vibration of ride-on machines — Use of harmonized data measured by international institutes, organizations and manufacturers |
ISO 5805:1997 | Mechanical vibration and shock — Human exposure — Vocabulary |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.