![header thumbnail](/images/publishers\bsi_cover.gif)
BS EN 12952-15:2003
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\bsi_cover.gif)
Water-tube boilers and auxiliary installations Acceptance tests
Hardcopy , PDF
English
14-10-2003
Foreword
1 Scope and field of application
1.1 Field of application
1.2 Scope
1.3 General information
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations and coefficients
4.1 Symbols and abbreviations
4.2 Coefficients
5 Guaranteed parameters
5.1 Basis for determining guaranteed parameters
5.2 Parameters subject to guarantee
5.3 Additional measurements
5.4 Supply of steam generator components by several
manufacturers
6 Basic test conditions
6.1 Method of determining efficiency
6.2 General conditions
6.3 Preliminary test runs
6.4 Conditions of steam generator
6.5 Steady-state conditions
6.6 Performance of test
6.7 Other information
7 Instrumentation and methods of measurements
7.1 General
7.2 Pressure measurements
7.3 Temperature measurements
7.4 Mass and mass flow
7.5 Calorific values
7.6 Chemical composition
7.7 Electric power
8 Heat balance and thermal efficiency
8.1 Heat balance and envelope boundary
8.2 Reference temperature
8.3 Heat input, heat output and losses
8.4 Thermal efficiency
9 Corrections to guarantee conditions
9.1 General
9.2 Correction for deviations of water/steam side inlet parameters
9.3 Correction of efficiency by input-output method to guarantee
conditions
9.4 Correction of efficiency by heat loss method to guarantee
conditions via heat balance
9.5 Correction of efficiency by heat loss method to guarantee
conditions with change in flue gas temperature
9.6 Efficiency under guarantee conditions
10 Averaging and uncertainty of measurement
10.1 General
10.2 Averaging and corrections
10.3 Fundamentals of calculating uncertainty
10.4 Guide values for measurement uncertainties
10.5 Calculation of uncertainty
Annex A (normative) Statistical Combustion Calculation
Bibliography
Describes direct-fired steam boilers and hot water generators, including the auxiliaries.
Committee |
PVE/2
|
DevelopmentNote |
Supersedes BS 2885(1974) & 99/716450 DC (10/2003)
|
DocumentType |
Standard
|
Pages |
92
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN 12952-15 : 2003 | Identical |
NEN EN 12952-15 : 2003 | Identical |
NS EN 12952-15 : 1ED 2003 | Identical |
SN EN 12952-15 : 2003 | Identical |
UNE-EN 12952-15:2004 | Identical |
I.S. EN 12952-15:2003 | Identical |
UNI EN 12952-15 : 2005 | Identical |
EN 12952-15:2003 | Identical |
NF EN 12952-15 : 2004 | Identical |
DIN EN 12952-15:2004-01 | Identical |
DIN EN 12952-15 E : 2004 | Identical |
VDI/VDE 2640 Blatt 3:1983-11 | Measurement of gas flow in circular; annular or rectangular sections of conduits velocity area method |
ISO 3993:1984 | Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method |
DIN 51700:2015-12 | TESTING OF SOLID FUELS - GENERALITIES AND INDEX OF METHODS OF TEST |
ISO 157:1996 | Coal — Determination of forms of sulfur |
VDI/VDE 3511 Blatt 1:1996-03 | Temperature measurement in industry - Principles and special methods of temperature measurement |
VDI/VDE 3511 Blatt 4:1995-01 | Temperature measurement in industry - Radiation thermometry |
DIN 51730:2007-09 | Testing of solid fuels - Determination of fusibility of fuel ash |
DIN 51603-4:2011-08 | Liquid fuels - Fuel oils - Part 4: Fuel oils R, Minimum requirements |
VDI 2048:1978-06 | Inaccuracies at acceptance test measurements; fundamental principles |
DIN 1943:1975-02 | THERMAL ACCEPTANCE TESTS OF STEAM TURBINES |
ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
VDI/VDE 2640 Blatt 4:1983-10 | Measurement of mean temperature in fluid flow |
VDI 2066-3 : 1986 | MEASUREMENT OF PARTICULATE MATTER - MANUAL DUST MEASUREMENT IN FLOWING GASES - GRAVIMETRIC DETERMINATION OF DUST LOAD - TUBULAR FILTER DEVICE (40 M[3]/H) |
VDI/VDE 2041:1991-04 | Measurement of fluid flow with primary devices; orifice plates and nozzles for special applications |
EN 60584-2:1993 | Thermocouples - Part 2: Tolerances |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
VGB R 450 : 2006 | GUIDELINES FOR FEED WATER, BOILER WATER AND STEAM QUALITY FOR POWER PLANTS/INDUSTRIAL PLANTS |
ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
VDI 2066 Blatt 4:1989-01 | Particulate matter measurement; measurement of particulate matter in flowing gases; determination of dust load by continuous; measurement of optical transmission |
ISO 6801:1983 | Rubber or plastics hoses Determination of volumetric expansion |
ASME PTC33 : 78(R1991) | PERFORMANCE TEST CODE - LARGE INCINERATORS |
DIN 1314:1977-02 | PRESSURE; BASIC CONCEPTS, UNITS |
BS 3048:1958 | Code for the continuous sampling and automatic analysis of flue gases: indicators and recorders |
BS 7420:1991 | Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions) |
EN ISO 3993:1995 | Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984) |
VDI/VDE 2040 Blatt 4:1996-09 (Draft) | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes - Fluid properties |
ISO 334:2013 | Solid mineral fuels Determination of total sulfur Eschka method |
BS 3405:1983 | Method for measurement of particulate emission including grit and dust (simplified method) |
DIN 51603-3:2016-08 (Draft) | LIQUID FUELS - FUEL OILS - PART 3: FUEL OIL S, MINIMUM REQUIREMENTS |
DIN 1944:1968-10 | ACCEPTANCE TESTS ON CENTRIFUGAL PUMPS (VDI-RULES FOR CENTRIFUGAL PUMPS) |
VDI 2066-2 : 1989 | MEASUREMENT OF PARTICULATE MATTER - MANUAL DUST MEASUREMENT IN FLOWING GASES - GRAVIMETRIC DETERMINATION OF DUST LOAD - TUBULAR FILTER DEVICES (4 M[3]/H, 12 M[3]/H) |
VDI/VDE 2040 Blatt 2:1987-04 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes; equations and formulae |
VDI/VDE 3511 Blatt 2:1996-04 | Temperature measurement in industry - Contact thermometers |
VDI 2045 Blatt 2:1993-08 | Acceptance and performance tests on turbo compressors and displacement compressors; theory and examples |
DIN 1871:1999-05 | Gaseous fuels and other gases - Density and other volumetric quantities |
ISO 5389:2005 | Turbocompressors — Performance test code |
ISO 1217:2009 | Displacement compressors Acceptance tests |
EN 12952-1:2015 | Water-tube boilers and auxiliary installations - Part 1: General |
ISO/TR 5168:1998 | Measurement of fluid flow Evaluation of uncertainties |
DIN 19216:1995-08 | FLOW MEASUREMENT - MOUNTING ARRANGEMENTS FOR FLOW MEASURING DEVICES ACCORDING TO THE DIFFERENTIAL PRESSURE METHOD |
EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
EN 26801:1993/A1:2011 | RUBBER OR PLASTICS HOSES - DETERMINATION OF VOLUMETRIC EXPANSION (ISO 6801:1983/AMD 1:2011) |
EN 60751:2008 | INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
BS 1017:1942 | Methods for sampling of coal and coke |
EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
VDI 2066 Blatt 6:1989-01 | Particulate matter measurement; measurement of particulate matter in flowing gases; determination of dust load by continuous measurement of scattered light with the photometer KTN |
IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
VDI/VDE 2040 Blatt 3:1990-05 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes - Examples of calculations |
DIN 51603-1:2016-08 (Draft) | LIQUID FUELS - FUEL OILS - PART 1: FUEL OILS EL, MINIMUM REQUIREMENTS |
DIN 5499:1972-01 | GROSS AND NET CALORIFIC VALUES; TERMS |
BS 893:1978 | Method for the measurement of the concentration of particulate material in ducts carrying gases |
DIN 51853:2011-12 | Testing of fuel gases - Sampling |
NFX 44 052 : 2002 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF HIGH RANGE MASS CONCENTRATION OF DUST - MANUAL GRAVIMETRIC METHOD |
ISO 1988:1975 | Hard coal Sampling |
VDI 2066-5 : 1987 | PARTICULATE MATTER MEASUREMENT - DUST MEASUREMENT IN FLOWING GASES; PARTICLE SIZE SELECTIVE MEASUREMENT BY IMPACTION METHOD - CASCADE IMPACTOR |
DIN 16160:1990-11 | THERMOMETERS - CONCEPTS |
EN 837-1:1996/AC:1998 | PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
ISO 589:2008 | Hard coal — Determination of total moisture |
BS 1042-2(1964) : LATEST | |
EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
DIN 1301-2:1978-02 | UNITS; SUB-MULTIPLES AND MULTIPLES FOR GENERAL USE |
EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
VDI/VDE 3512 Blatt 3:2009-02 | Temperature measurements for building automation - Installation of temperature sensors |
ISO 2309:1980 | Coke Sampling |
VDI/VDE 3511 Blatt 5:1994-11 | TEMPERATURE MEASUREMENT IN INDUSTRY - INSTALLATION OF THERMOMETERS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.