![header thumbnail](/images/publishers\bsi_cover.gif)
BS EN 13121-3:2016
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\bsi_cover.gif)
GRP tanks and vessels for use above ground Design and workmanship
Hardcopy , PDF
English
30-04-2016
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Information and requirements to be supplied
and documented
6 Material
7 Mechanical properties
8 Determination of design strain and loadings
9 Design
10 Design analysis
11 Bolted flange connections
12 Supports for vessels and tanks
13 Seismic loading
14 Design calculation for tank and vessel anchorage
15 Structures and fittings
16 Local load analysis
17 Quality Control
18 Marking
Annex A (informative) - Product testing for serial or
batch production process
Annex B (informative) - Derivation of laminate properties
from laminate properties
Annex C (normative) - Pressure and leak testing
Annex D (normative) - Methods of tests
Annex E (normative) - Approval testing of laminators
Annex F (informative) - Design by stress analysis
Annex G (normative) - Environmental aspects
Annex ZA (informative) - Relationship between this
European Standard and the essential requirements of
Directive 2014/68/EU aimed to be covered
Bibliography
Provides requirements for the design, fabrication, inspection, testing and verification of GRP tanks and vessels with or without thermoplastics lining for storage or processing of fluids, factory made or site built, non-pressurised or pressurised up to 10 bar, for use above ground.
Committee |
PRI/5
|
DevelopmentNote |
Supersedes 01/121060 DC & 04/30046221 DC. (08/2008) Supersedes BS 4994(1987) & 14/30298583 DC. (05/2016)
|
DocumentType |
Standard
|
Pages |
212
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard gives requirements for the design, fabrication, inspection, testing and verification of GRP tanks and vessels with or without thermoplastics lining for storage or processing of fluids, factory made or site built, non-pressurized or pressurized up to 10 bar, for use above ground. Further requirements are presented in normative Annex G.
The terms vessels and tanks as used in this part of EN 13121 include branches up to the point of connection to pipe work or other equipment by bolting and supports, brackets or other attachments bonded directly to the shell.
This part of EN 13121 covers vessels and tanks subject to temperatures between – 40 °C and 120 °C.
Excluded from this part of EN 13121 are:
tanks and vessels for the transport of fluids;
underground storage tanks;
spherical vessels;
vessels and tanks of irregular shape;
tanks and vessels with double containment where the double wall is considered structural;
tanks and vessels which are subject to the risk of explosion, or failure of which may cause an emission of radioactivity;
specification for fibre reinforced cisterns of one piece and sectional construction for the storage, above ground, of cold water (see EN 13280).
Standards | Relationship |
EN 13121-3:2016 | Identical |
09/30209261 DC : 0 | BS 5911-1:2002+A2 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 1: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE PIPES (INCLUDING JACKING PIPES) AND FITTINGS WITH FLEXIBLE JOINTS (COMPLEMENTARY TO BS EN 1916:2002) |
EEMUA 193 : 2013 | MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT |
EN 13121-1:2003 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
ISO 3915:1981 | Plastics — Measurement of resistivity of conductive plastics |
CEN/TR 13121-5 : 2017 | GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel |
EN 1991-4:2006/AC:2012 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS |
ISO 527-4:1997 | Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
EN 1991-1-6:2005/AC:2013 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution |
EN ISO 527-4:1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
EN 1991-1-3:2003/A1:2015 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
EN 13121-2:2003 | GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance |
EN 13923:2005 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
EN 1991-1-5:2003/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS |
IEC 60721-2-6:1990 | Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock |
ISO 899-2:2003 | Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading |
EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
2014/68/EU : 2014 COR 1 2015 | DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE |
EN 13121-4:2005/AC:2007 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 4: DELIVERY, INSTALLATION AND MAINTENANCE |
EN ISO 1172:1998 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN ISO 14125:1998/A1:2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
EN ISO 9513:2012/AC:2013 | Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013) |
EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
EN 1993-1-3:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
EN 13067:2012 | Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies |
EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
EN ISO 11357-2:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013) |
ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
EN ISO 899-2:2003/A1:2015 | Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015) |
EN 1998-1:2004/A1:2013 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 1991-1-4:2005/A1:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
EN ISO 3915:1999 | PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS |
ISO 14692-3:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design |
EN 13280:2001 | Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water |
EN 1998-4:2006 | Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines |
EN ISO 14692-3:2017 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017) |
EN 1993-1-1:2005/A1:2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 13555:2014 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.