BS EN 1339:2003
Current
The latest, up-to-date edition.
Concrete paving flags. Requirements and test methods
Hardcopy , PDF
English
31-08-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for materials
4.1 General
4.2 Asbestos
5 Requirements for products
5.1 General
5.2 Shape and dimensions
5.2.1 General
5.2.2 Work dimensions
5.2.3 Spacer nibs, draw or chased profiled side
faces
5.2.4 Permissible deviations
5.3 Physical and mechanical properties
5.3.1 General
5.3.2 Weathering resistance
5.3.3 Bending strength.
5.3.4 Abrasion resistance
5.3.5 Slip/skid resistance
5.3.6 Breaking load
5.3.7 Fire performance
5.3.8 Thermal conductivity
5.4 Visual aspects
5.4.1 Appearance
5.4.2 Texture
5.4.3 Colour
6 Evaluation of conformity
6.1 General
6.1.1 Demonstration of conformity
6.1.2 Assessment of conformity
6.2 Type testing of the product
6.2.1 Initial type testing
6.2.2 Further type test
6.2.3 Sampling, testing and conformity criteria
6.3 Factory production control
6.3.1 General
6.3.2 Equipment
6.3.3 Raw and other incoming materials
6.3.4 Production process
6.3.5 Product testing
6.3.6 Marking, storage and delivery of products
6.3.7 Non-conforming products
6.3.8 Product conformity criteria
7 Marking
8 Test report
Annex A (informative) Inspection schemes
A.1 Equipment inspection
A.2 Materials inspection
A.3 Production process inspection
A.4 Product inspection
A.5 Switching rules
Annex B (normative) Procedure for acceptance testing
of a consignment at delivery
B.1 General
B.2 Sampling procedure
B.3 Conformity criteria
Annex C (normative) Measurement of the dimensions
of a single flag
C.1 Preparation
C.2 Plan dimensions
C.3 Thickness
C.4 Flatness and bow
C.5 Chamfer
C.6 Thickness of facing layer
C.7 Examples of measuring equipment
C.8 Test report
Annex D (normative) Determination of freeze/thaw
resistance with de-icing salt
D.1 Principle
D.2 Specimen
D.3 Materials
D.4 Apparatus
D.5 Preparation of test specimens
D.6 Procedure
D.7 Calculation of test results
D.8 Test report
Annex E (normative) Determination of total water
absorption
E.1 Principle
E.2 Specimen
E.3 Materials
E.4 Apparatus
E.5 Preparation of the test specimens
E.6 Procedure
E.7 Calculation of test results
E.8 Test report
Annex F (normative) Measurement of bending strength
and breaking load
F.1 Apparatus
F.2 Preparation
F.3 Procedure
F.4 Calculation of test results
F.5 Test report
Annex G (normative) Measurement of abrasion resistance
G.1 Principle of wide wheel abrasion test
G.2 Abrasive material
G.3 Apparatus
G.4 Calibration
G.5 Preparation of the specimen
G.6 Procedure
G.7 Measuring the groove
G.8 Calculation of test results
G.9 Test report
Annex H (normative) Measuring of abrasion according to
the Böhme test
H.1 Principle
H.2 Abrasive material
H.3 Apparatus
H.4 Preparation of specimens
H.5 Procedure
H.6 Calculation of test results
H.7 Test report
Annex I (normative) Method for the determination of
unpolished slip resistance value (USRV)
I.1 Principle
I.2 Apparatus
I.3 Calibration
I.4 Sampling
I.5 Procedure
I.6 Calculation of test results
I.7 Test report
Annex J (normative) Verification of visual aspects
J.1 Preparation
J.2 Procedure
Annex K (informative) Example of the application of
the method for the evaluation of conformity
of either bending strength or breaking load
by variables (6.3.8.3.B)
K.1 General
K.2 Basic formula
K.3 Acceptance factors
K.4 Standard deviations s
K.5 Application of switching rules
K.6 Results
Annex ZA (informative) Clauses of this European
Standard addressing the provisions of the
EU Construction Products Directive (89/106/EEC)
ZA.1 Scope and relevant characteristic
ZA.2 Procedures for the attestation of conformity
ZA.2.1 System of attestation of conformity
ZA.2.2 Declaration of conformity
ZA.3 Assignation of tasks
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.