BS EN 13677-2:2003
Current
The latest, up-to-date edition.
Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements
Hardcopy , PDF
English
21-02-2003
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General Requirements
4.1 Appearance
4.2 Packaging
4.3 Labelling
5 Sampling
5.1 Certificate of Conformity
5.2 Resolution of quality issues
6 Preparation of plaques and test specimens
6.1 Test plaques
6.2 Preparation of specimens
7 List of Properties
Annex A (normative) Procedure for determining the warpage of blanks
A.1 Principle
A.2 Apparatus
A.3 Procedure
A.4 Calculation and report of results
Annex B (normative) Procedure for determining the rectangularity
of blanks
B.1 Principle
B.2 Apparatus
B.3 Procedure
B.4 Calculation and report of results
Annex C (normative) Procedure for determining the material temperature
of GMT blanks prior to moulding test plaques
C.1 General
C.2 Principle
C.3 Apparatus
C.4 Procedure
C.5 Calculation and report of results
Annex D (normative) Procedure for determining the blank weight
and blank dimensions
D.1 Principle
D.2 Apparatus
D.3 Procedure
D.4 Calculation and presentation of results
Annex E (normative) Procedure for determining the shrinkage after
processing
E.1 Principle
E.2 Apparatus
E.3 Procedure
E.4 Calculation and presentation of results
Annex F (normative) Procedure for determining the thermal processing
stability
F.1 General
F.2 Principle
F.3 Apparatus
F.4 Procedure
F.5 Calculation and presentation of results
Annex G (normative) Procedure for determining the flow induced
anisotropy
G.1 General
G.2 Principle
G.3 Apparatus
G.4 Procedure
G.5 Calculation and presentation of results
Annex H (normative) Parameters for heating ovens for blanks
for moulding test tensile plaques
Annex I (informative) Definition of GMT production direction
Bibliography
Describes the general requirements applicable to the specification of all types of glass mat reinforced polypropylene composite sheet (GMT).
| Committee |
PRI/42
|
| DevelopmentNote |
Supersedes 99/122914 DC (03/2003)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 13677-2 : 2003 | Identical |
| NF EN 13677-2 : 2003 | Identical |
| EN 13677-2:2003 | Identical |
| NS EN 13677-2 : 1ED 2003 | Identical |
| DIN EN 13677-2:2003-07 | Identical |
| NBN EN 13677-2 : 2003 | Identical |
| I.S. EN 13677-2:2003 | Identical |
| UNE-EN 13677-2:2003 | Identical |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ISO 6603-2:2000 | Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
| EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
| ISO 6721-2:2008 | Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method |
| ISO 527-4:1997 | Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| EN ISO 6721-2:2008 | Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008) |
| EN ISO 527-4:1997 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| ISO 11403-2:2012 | Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties |
| EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
| ISO 1183:1987 | Plastics — Methods for determining the density and relative density of non-cellular plastics |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 2577:2007 | Plastics — Thermosetting moulding materials — Determination of shrinkage |
| ISO 3146:2000 | Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| EN ISO 6603-2:2000 | Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
| EN ISO 11403-2:2012 | Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 1172:1998 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
| ISO 62:2008 | Plastics — Determination of water absorption |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| ISO 178:2010 | Plastics — Determination of flexural properties |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.