BS EN 1462:2004
Current
The latest, up-to-date edition.
Brackets for eaves gutters. Requirements and testing
Hardcopy , PDF
English
02-09-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Resistance to corrosion
6 Design
6.1 General
6.2 Load bearing capacity
6.3 Holes for fastenings
7 Designation of gutter brackets for ordering purposes
8 Marking
9 Production control
Annex A (normative) Test method to determine the corrosion
resistance of plastic-coated gutter
brackets
A.1 Principle
A.2 Apparatus
A.3 Procedure
Annex B (normative) Test method to determine the load bearing
capacity of gutter brackets
B.1 Principle
B.2 Apparatus
B.3 Procedure
Specifies both eaves and rafter brackets for use with gutters manufactured to EN 607 and EN 612. However, roll fronted (bead stiffened) metal gutters of the type specified in EN 612 are not generally used in the UK and stronger brackets than those specified in EN 1462 are required for use with the heavier UK metal gutters.
| Committee |
PRI/88
|
| DevelopmentNote |
Supersedes 94/104990 DC. (09/2005) Together with BS EN 607 and BS EN 12200-1, supersedes BS 4576-1(1989). (10/2007)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 1462:2004-12 | Identical |
| NS EN 1462 : 2ED 2004 | Identical |
| EN 1462:2004 | Similar to |
| UNI EN 1462 : 2005 | Identical |
| SN EN 1462 : 1997 | Identical |
| UNE-EN 1462:2006 | Identical |
| EN 1462:2004 | Identical |
| I.S. EN 1462:2004 | Identical |
| NBN EN 1462 : 2004 | Identical |
| NF EN 1462 : 2005 | Identical |
| NEN EN 1462 : 2004 | Identical |
| EN ISO 1462 : 1995 | Identical |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 09/30196573 DC : 0 | BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| BS 4514:2001 | Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes. Specification |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 8530:2010 | Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 612:2005 | Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| EN 607:2004 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.