BS EN 15027 : 2007
Current
The latest, up-to-date edition.
TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
Hardcopy , PDF
English
01-01-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 General
5.2 Mechanical hazards
5.2.1 General
5.2.2 Protection against moving parts
5.2.3 Stability
5.2.4 Transport and handling
5.2.5 Fixing of the cutting tool
5.2.6 Manual starting
5.2.7 Guiding systems
5.2.8 Control devices
5.2.9 Failure of power supply
5.3 Electrical hazards
5.4 Thermal hazards
5.5 Exhaust fumes (internal combustion engines)
5.6 Hydraulic and pneumatic installations
5.6.1 Hydraulic installations
5.6.2 Pneumatic installations
5.6.3 Hoses and pipes under pressure
5.7 Fluid containers
5.8 Cutting debris and dust emission
5.9 Rotational speed
5.10 Noise reduction at design stage
5.11 Maintenance
6 Verification of safety requirements and/or measures
7 Information for use
7.1 General
7.2 Marking
7.2.1 Regular marking
7.2.2 Other information
7.2.3 Warning about residual risks
7.3 Accompanying documents
7.3.1 General
7.3.2 Operator's instructions
7.3.3 Maintenance instructions
7.3.4 Spare parts list
Annex A (normative) - Noise test code - Grade 2 of accuracy
A.1 General
A.2 Measurement of the A-weighted emission sound
pressure level at the work station
A.3 Determination of the A-weighted sound power level
emitted by the machine
A.4 Operating conditions
A.5 Information to be recorded
A.6 Information to be reported
A.7 Noise declaration by the manufacturer
Annex B (normative) - Requirements for cutting-off wheel and
wire guards
B.1 General
B.2 Tool guards for wall saws
B.3 Tool guard for wire saws
Annex C (normative) - Pictograms
Annex D (normative) - Verification of surface temperature
D.1 Test equipment
D.2 Test method
D.3 Test acceptance
Annex E (informative) - Examples for working areas and dangerous
areas for wire saws
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Covers all significant hazards, hazardous situations and events relevant to wall saws and wire saws machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
| Committee |
B/513/-/6
|
| DevelopmentNote |
Supersedes 04/19987464 DC. (12/2007) 2007 Edition Re-Issued in May 2009 & incorporates AMD 1 2009. Supersedes 08/30176810 DC. (05/2009)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 15027:2008 | Identical |
| NBN EN 15027 : 2008 + A1 2009 | Identical |
| UNI EN 15027 : 2009 | Identical |
| NS EN 15027 : 2007 + A1 2009 | Identical |
| NEN EN 15027 : 2007 + A1 2009 | Identical |
| I.S. EN 15027:2007 | Identical |
| SN EN 15027 : 2008 + A1 2009 | Identical |
| EN 15027:2007+A1:2009 | Identical |
| NF EN 15027 : 2008 + A1 2009 | Identical |
| DIN EN 15027:2010-03 | Identical |
| EN 13236:2010+A1:2015 | Safety requirements for superabrasive products |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| ISO 21537-2:2004 | Clamping flanges for superabrasive cutting-off wheels — Part 2: Building and construction |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| IEC 61029-1:1990 | Safety of transportable motor-operated electric tools - Part 1: General requirements |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.