BS EN 1553:2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
Hardcopy , PDF
24-02-2006
English
15-02-2000
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Safety requirements and/or measures
4.1 Requirements applicable to all machines
4.1.1 Fundamental principles, design
guidance
4.1.2 Noise
4.1.3 Vibration
4.1.4 Actuating forces on controls
4.1.5 Operator stations
4.1.6 Other boarding means
4.1.7 Protection against mechanical hazards
4.1.8 Protection against other hazards
4.1.9 Service and maintenance - Manual
operation of individual assemblies
4.2 Requirements applicable to self propelled
ride-on machines
4.2.1 Controls
4.2.2 Operator station
4.2.3 Access to the driver's seat
4.2.4 Protection against mechanical hazards
4.2.5 Protection against other hazards
4.2.6 Service and maintenance
4.3 Requirements applicable to mounted, semi-mounted
and trailed tic and electrical links with a
self-propelled machine
4.3.1 Controls
4.3.2 Protection against mechanical hazards
4.3.3 Protection against other hazards -
Hydraulic, pneumatic and electrical
links with a self-propelled machine
4.3.4 Service and maintenance
5 Information for use
5.1 Instruction handbook
5.2 Warnings
5.3 Marking
Annex A (normative) List of hazards
Annex B (normative) Test for strength of guards and barriers
B.1 - Guards
B.1.1 - Test equipment
B.1.2 - Test procedure
B.1.3 - Test acceptance
B.2 - Barriers
B.2.1 - Test equipment
B.2.2 - Test procedure
B.2.3 - Test acceptance
Annex C (normative) Use of the ISO standards 3789-1:1982,
3789-2:1982
Annex D (informative) Measurement, declaration and
verification of noise emission values
D.0 - Introduction
D.1 - Scope
D.2 - Emission sound pressure level determination
D.3 - Sound power level determination
D.4 - Installation and mounting conditions
D.5 - Operating conditions
D.6 - Measurement uncertainties
D.7 - Information to be recorded and reported
D.8 - Declaration and verification
Annex E (informative) Data sheet and test report form
Annex ZA (informative) Relationship of this European
Standard with EU Directives
Bibliography Lists of standards or draft standards to which
it is referred in 4.1.4 and in Annexes A and D
Covers safety requirements together with their verification for designing and constructing of common aspects of all types of agricultural self-propelled ride-on machines and mounted, semi-mounted or trailed machines, not including tractors, agricultural aircraft and air cushion vehicles.
Committee |
AGE/6
|
DevelopmentNote |
Supersedes 94/712514 DC. (09/2005)
|
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 1553 : 1999 | Identical |
NBN EN 1553 : 2000 | Identical |
SN EN 1553 : 2000 | Identical |
UNE-EN 1553:2000 | Identical |
NS EN 1553 : 1ED 2000 | Identical |
UNI EN 1553 : 2001 | Identical |
I.S. EN 1553:2000 | Identical |
NEN EN 1553 : 1999 | Identical |
NF EN 1553 : 2000 | Identical |
EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
ISO 3789-1:1982 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 1: Common controls |
EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 5006-3:1993 | Earth-moving machinery Operator's field of view Part 3: Criteria |
ISO 5006-1:1991 | Earth-moving machinery Operator's field of view Part 1: Test method |
ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
ISO 3789-2:1982 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls — Part 2: Controls for agricultural tractors and machinery |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
EN ISO 3767-1 : 2000 | TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 1: COMMON SYMBOLS |
ISO/TS 15077:2002 | Tractors and self-propelled machinery for agriculture and forestry Operator controls Actuating forces, displacement, location and method of operation |
ISO 3767-2:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machinery |
ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
ISO 5721:1989 | Tractors for agriculture Operator's field of vision |
EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
ISO/TR 3778:1987 | Agricultural tractors — Maximum actuating forces required to operate controls |
EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
ISO 5008:2002 | Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the operator |
ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 1152 : 1994 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE OFF (PTO) DRIVE SHAFTS - WEAR AND STRENGTH TESTS |
EN 25353 : 1988 | EARTH-MOVING MACHINERY & TRACTORS & MACHINERY FOR AGRICULTURE & FORESTRY - SEAT INDEX POINT |
EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
PREN 12965 : DRAFT 2017 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY |
EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
ISO 5006-2:1993 | Earth-moving machinery Operator's field of view Part 2: Evaluation method |
EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
EN ISO 3767-2:1995/A2:2000 | TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 2: SYMBOLS FOR AGRICULTURAL TRACTORS AND MACHINERY |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.