BS EN 16192:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Characterization of waste. Analysis of eluates
Hardcopy , PDF
03-04-2020
English
30-04-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sample pretreatment
5 Blank determination
6 Interference
7 Selection of the suitable test method
8 Expression of results
9 Test report
Annex A (informative) - Validation of EN 12506:2003 and
EN 13370:2003
Annex B (informative) - Additional validation data
Bibliography
Describes methods for the determination of the parameters pH, ammonium, AOX, As, Ba, Cd, Cl[-], easily liberatable CN[-], Co, Cr, Cr(VI), Cu, DOC/TOC, electrical conductivity, F[-], Hg, Mo, Ni, NO[2][-], Pb, phenol index, total S, Sb, Se, SO[4][2-], TDS, V and Zn in aqueous eluates for the characterization of waste.
Committee |
EH/4
|
DevelopmentNote |
Supersedes BS EN 12506, BS EN 13370 & 10/30233988 DC. (04/2012)
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This European Standard specifies methods for the determination of the parameters pH, ammonium, AOX, As, Ba, Cd, Cl-, easily liberatable CN-, Co, Cr, Cr(VI), Cu, DOC/TOC, electrical conductivity, F-, Hg, Mo, Ni, NO2-, Pb, phenol index, total S, Sb, Se, SO42-, TDS, V and Zn in aqueous eluates for the characterization of waste.
Standards | Relationship |
EN 16192:2011 | Identical |
ISO 23913:2006 | Water quality — Determination of chromium(VI) — Method using flow analysis (FIA and CFA) and spectrometric detection |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
EN ISO 14403:2002 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
CEN/TS 14429:2005 | Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition |
EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
ISO 11969:1996 | Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique) |
ISO 11083:1994 | Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide |
EN ISO 10304-3:1997 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997) |
EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
EN ISO 15586:2003 | Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003) |
ISO/TR 13530:1997 | Water quality Guide to analytical quality control for water analysis |
EN 26777:1993 | Water quality - Determination of nitrite - Molecular absorption spectrometric method (ISO 6777:1984) |
EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
ISO 10304-3:1997 | Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate |
ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
ISO 15682:2000 | Water quality Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
ISO 17852:2006 | Water quality Determination of mercury Method using atomic fluorescence spectrometry |
ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
CEN/TS 14997:2006 | Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control |
ISO 9965:1993 | Water quality Determination of selenium Atomic absorption spectrometric method (hydride technique) |
ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
ISO 9297:1989 | Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method) |
ISO 6777:1984 | Water quality — Determination of nitrite — Molecular absorption spectrometric method |
EN ISO 17852:2008 | Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006) |
EN ISO 23913:2009 | Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006) |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
CEN/TR 16184:2011 | Characterization of Waste - State-of-the-art document - Analysis of eluates |
ENV ISO 13530:1998 | Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997) |
EN 13370:2003 | Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- |
ISO 15586:2003 | Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace |
NEN 6604 : 2007 | WATER QUALITY - DETERMINATION OF AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHO-PHOSPHATE, SULPHATE AND SILICATE BY A DISCRETE ANALYZER SYSTEM AND SPECTROPHOTOMETRIC DETECTION |
ISO 7888:1985 | Water quality — Determination of electrical conductivity |
EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 14403:2002 | Water quality Determination of total cyanide and free cyanide by continuous flow analysis |
ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
ISO 22743:2006 | Water quality Determination of sulfates Method by continuous flow analysis (CFA) |
EN 12920:2006+A1:2008 | Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
EN ISO 15682:2001 | Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000) |
EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
EN ISO 9562:2004 | Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
CEN/TS 14405 : 2004 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
ISO 10523:2008 | Water quality — Determination of pH |
EN 15216:2007 | Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates |
EN ISO 11969:1996 | Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
EN ISO 14402:1999 | Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999) |
EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
ISO 17294-2:2016 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes |
EN ISO 14911:1999 | Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
EN ISO 17294-2:2016 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016) |
ISO 14911:1998 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water |
EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.