BS EN 20286-2:1993
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ISO system of limits and fits ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
Hardcopy , PDF
31-07-2010
English
31-01-1990
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
Committees responsible
Specification
0. Introduction
1. Scope
2. Field of application
3. References
4. Standard tolerances
5. Limit deviations for holes
6. Limit deviations for shafts
7. Bibliography
Annex
Graphical review of tolerance zones of holes and shafts
Tables
1. Numerical values of standard tolerance grades IT
for basic sizes up to 3 150 mm
2. Limit deviations for holes A, B and C
3. Limit deviations for holes CD, D and E
4. Limit deviations for holes EF and F
5. Limit deviations for hoels FG and G
6. Limit deviations for holes H
7. Limit deviations for holes JS
8. Limit deviations for holes J and K
9. Limit deviations for holes M and N
10. Limit deviations for holes R
12. Limit deviations for holes S
13. Limit deviations for holes T and U
14. Limit deviations for holes V, X and Y
15. Limit deviations for holes Z and ZA
16. Limit deviations for holes ZB and ZC
17. Limit deviations for shafts a, b and c
18. Limit deviations for shafts cd and d
19. Limit deviations for shafts e and ef
20. Limit deviations for shafts f and fg
21. Limit deviations for shafts g
22. Limit deviations for shafts h
23. Limit deviations for shafts js
24. Limit deviations for shafts j and k
25. Limit deviations for shafts m and n
26. Limit deviations for shafts p
27. Limit deviations for shafts r
28. Limit deviations for shafts s
29. Limit deviations for shafts t and u
30. Limit deviations for shafts v, x and y
31. Limit deviations for shafts z and za
32. Limit deviations for shafts zb and zc
Figures
1. Upper and lower deviations
2. Synoptic representation of tolerance classes for
holes for basic sizes less than or equal to 500 mm
3. Synoptic representation of tolerance classes for
holes for basic sizes greater than 500 mm and less
than or equal to 3 150 mm
4. Synoptic representation of tolerance classes for
shafts for basic sizes less than or equal to 500 mm
5. Synoptic representation of tolerance classes for
shafts for basic sizes greater than 500 mm and less
than or equal to 3 150 mm
6. Graphical review of tolerance classes for holes in
terms of fundamental deviations
7. Graphical review of tolerance classes for holes in
terms of standard tolerances grades
8. Graphical review of tolerance classes for shafts in
terms of fundamental deviations
9. Graphical review of tolerance classes for shafts in
terms of standard tolerance grades
Calculated from the information given in Part 1.
| Committee |
TPR/1
|
| DevelopmentNote |
Supersedes and renumbers BS 4500-1.2(1990) (07/2004)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 286-2:2010 | Identical |
| UNI EN 20286-2 : 1995 | Identical |
| UNE-EN 20286-2:1996 | Identical |
| EN 20286-2 : 1993 | Identical |
| NF EN 20286-2 : 1993 | Identical |
| I.S. EN 20286-2:1994 | Identical |
| NBN EN 20286-2 : 1993 | Identical |
| SN EN 20286-2 : 1995 | Identical |
| 03/300415 DC : DRAFT JAN 2003 | BS XXXX - MECHANICAL DESIGN AND POWER REQUIREMENTS FOR TROUGHED BELT CONVEYORS |
| BS A 306:1994 | Rivets, solid, universal head, metallic material, with or without surface treatment. Dimensions |
| 02/707771 DC : 0 | BS 192-1 - OPEN-ENDED WRENCHES - PART 1: UNIFIED SIZES |
| BS A 312:1997 | Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS A 308:1994 | Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS 8888:2008 | Technical product specification. Specification |
| BS 8888:2002 | Technical product documentation (TPD). Specification for defining, specifying and graphically representing products |
| BS 4825-3(1991) : 1991 | STAINLESS STEEL TUBES AND FITTINGS FOR THE FOOD INDUSTRY AND OTHER HYGIENIC APPLICATIONS - PART 3: SPECIFICATION FOR CLAMP TYPE COUPLINGS |
| BS 8888:2011 | Technical product documentation and specification |
| BS 4825-4(1991) : 1991 | STAINLESS STEEL TUBES AND FITTINGS FOR THE FOOD INDUSTRY AND OTHER HYGIENIC APPLICATIONS - PART 4: SPECIFICATION FOR THREADED (IDF TYPE) COUPLINGS |
| DEFSTAN 02-304(PT3)/2(2002) : 2002 | SHAFTING SYSTEMS AND PROPULSORS - PART 3: MANUFACTURING AND DETAIL DESIGN REQUIREMENTS FOR PROPULSORS |
| DEFSTAN 02-304(PT1)/2(2002) : 2002 | SHAFTING SYSTEMS AND PROPULSORS - PART 1: DESIGN REQUIREMENTS FOR MAIN PROPULSION SHAFTING |
| DEFSTAN 02-304(PT2)/2(2002) : 2002 | SHAFTING SYSTEMS AND PROPULSORS - PART 2: DESIGN REQUIREMENTS FOR MAIN PROPULSION SHAFTING AUXILIARIES |
| DEFSTAN 02-305/2(2003) : 2003 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
| DEFSTAN 02-305/3(2010) : 2010 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
| PD 970:2001 | Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels |
| BS A 309:1994 | Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS 341-3:2002 | Transportable gas container valves Valve outlet connections |
| 02/707778 DC : 0 | BS 4006-2 - HAND OPERATED SQUARE DRIVE SOCKET WRENCHES - PART 2: BS/WHITWORTH AND BA SIZES |
| BS EN ISO 898-6:1996 | Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
| BS 4190:2001 | ISO metric black hexagon bolts, screws and nuts. Specification |
| BS 1916-3:2009 | Limits and fits for engineering Guide to tolerances, limits and fits for large diameters |
| BS 3692:2001 | ISO metric precision hexagon bolts, screws and nuts. Specification |
| BS 4500:2009 | Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
| BS 2559:1994 | Specification for screwdrivers and screwdriver accessories |
| 11/30234091 DC : DRAFT JULY 2011 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| BS 1916-1:2009 | Limits and fits for engineering Guide to limits and tolerances |
| BS 5045-8:2000 | Transportable gas containers Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15°C for special portable application |
| 02/707775 DC : 0 | BS 3555-1 - RING WRENCHES - PART 1: UNIFIED SIZES |
| BS 4825-5(1991) : 1991 | STAINLESS STEEL TUBES AND FITTINGS FOR THE FOOD INDUSTRY AND OTHER HYGIENIC APPLICATIONS - PART 5: SPECIFICATION FOR RECESSED RING JOINT TYPE COUPLINGS |
| PD 970:2005 | Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels |
| BS 228:1994 | Specification for short-pitch transmission precision roller chains and chain wheels |
| 02/707772 DC : 0 | BS 192-2 - OPEN-ENDED WRENCHES - PART 2: BS/WHITWORTH SIZES |
| BS 192-1:1996 | Open-ended wrenches Metric and unified |
| 02/707776 DC : DRAFT DEC 2002 | BS 3555-2 - RING WRENCHES - PART 2: BS/WHITWORTH SIZES |
| BS A 303:1994 | Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS 1916-2:2009 | Limits and fits for engineering Guide to the selection of fits in BS 1916-1 |
| BS A 310:1995 | Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions |
| 02/707773 DC : 0 | BS 7586-1 - COMBINATION WRENCHES - PART 1: UNIFIED SIZES |
| BS EN 10246-1:1996 | Non-destructive testing of steel tubes Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| BS 8888:2004 | Technical product specification (TPS). Specification |
| BS 2795:1981 | Specification for dial test indicators (lever type) for linear measurement |
| BS 7780-1:1994 | Specification for rotary shaft lip type seals Nominal dimensions and tolerances |
| BS A 307:1994 | Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BIP 3016 : 2004 | BS 8888(2004) - TECHNICAL PRODUCT SPECIFICATION CD-ROM |
| BS A 304:1994 | Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| 02/707774 DC : 0 | BS 7586-2 - COMBINATION WRENCHES - PART 2: BS/WHITWORTH SIZES |
| 02/707777 DC : 0 | BS 4006-1 - HAND OPERATED SQUARE DRIVE SOCKET WRENCHES - PART 1: UNIFIED SIZES |
| BS 8888:2006 | Technical product specification (TPS). Specification |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 5166:1982 | System of cone fits for cones from C = 1 : 3 to 1 : 500, lengths from 6 to 630 mm and diameters up to 500 mm |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 406:1987 | Technical drawings Tolerancing of linear and angular dimensions |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO/R 1938:1971 | ISO system of limits and fits Part II : Inspection of plain workpieces |
| ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.