BS EN 50583-2:2016
Current
The latest, up-to-date edition.
Photovoltaics in buildings BIPV systems
Hardcopy , PDF
English
31-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Labelling
6 System documentation, commissioning tests
and inspection
Annex A (informative) - Resistance to wind-driven rain
of BIPV roof coverings with discontinuously laid
elements - Test method
Bibliography
Pertains to photovoltaic systems that are integrated into buildings with the photovoltaic modules used as construction products.
| Committee |
GEL/82
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This document applies to photovoltaic systems that are integrated into buildings with the photovoltaic modules used as construction products. It focuses on the properties of these photovoltaic systems relevant to essential building requirements as specified in the European Construction Product Regulation CPR89/106/EEC , and the applicable electro-technical requirements as stated in the Low Voltage Directive 2006/95/EC /or CENELEC standards. This document references international standards, technical reports and guidelines. For some applications in addition national standards (or regulations) for building works may apply in individual countries, which are not explicitly referenced here. The document is addressed to manufacturers, planners, system designers, installers, testing institutes and building authorities. This document does not apply to concentrating or building-attached photovoltaic systems. 1 This document addresses requirements on the BIPV systems in the specific ways they are intended to be mounted but not the BIPV modules as construction products, which is the topic of EN50583‑1 .
| Standards | Relationship |
| EN 50583-2:2016 | Identical |
| EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| IEC 60364-7-712:2017 | Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
| EN 13116:2001 | Curtain walling - Resistance to wind load - Performance requirements |
| CLC/TS 61836:2009 | Solar photovoltaic energy systems - Terms, definitions and symbols |
| ISO 12631:2017 | Thermal performance of curtain walling — Calculation of thermal transmittance |
| EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| EN 1027:2016 | Windows and doors - Water tightness - Test method |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| IEC TS 61836:2007 | Solar photovoltaic energy systems - Terms, definitions and symbols |
| EN ISO 12543-2:2011 | Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) |
| EN 15978:2011 | Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method |
| EN 15804:2012 | Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products |
| ISO 12543-3:2011 | Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass |
| EN 14500:2008 | Blinds and shutters - Thermal and visual comfort - Test and calculation methods |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 62446:2009 | Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection |
| EN ISO 12543-3:2011 | Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011) |
| EN 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| EN ISO 12631:2017 | Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017) |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| CEN/TR 15941:2010 | Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data |
| ISO 12543-2:2011 | Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass |
| EN 12519:2004 | Windows and pedestrian doors - Terminology |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| CEN/TR 15601:2012 | Hygrothermal performance of buildings - Resistance to wind - driven rain of roof coverings with discontinuously laid small elements - Test methods |
| EN 15942:2011 | Sustainability of construction works - Environmental product declarations - Communication format business-to-business |
| EN 13830:2015 | Curtain walling - Product standard |
| HD 60364-7-712:2016 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| ISO 12543-1:2011 | Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts |
| EN 12179:2000 | Curtain walling - Resistance to wind load - Test method |
| IEC 62446:2009 | Grid connected photovoltaic systems - Minimum requirements for system documentation, commissioning tests and inspection |
| EN 13119:2016 | Curtain walling - Terminology |
| ISO 12543-4:2011 | Glass in building Laminated glass and laminated safety glass Part 4: Test methods for durability |
| EN ISO 12543-4:2011 | Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011) |
| ISO 12543-6:2011 | Glass in building Laminated glass and laminated safety glass Part 6: Appearance |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| EN ISO 12543-5:2011 | Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011) |
| EN 13956:2012 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| EN 16002:2010 | Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing |
| ISO 12543-5:2011 | Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing |
| EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.