• There are no items in your cart

EN 12758:2011

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties

Superseded date

12-09-2019

Published date

26-01-2011

Foreword
1 Scope
2 Normative references
3 Terms and definitions and symbols
4 Glass products
5 Test methods
6 Sound insulation rating and classification
7 Typical performance data
Annex A (normative) - Description of Reference
        Insulating Glass Units
Annex B (informative) - Glazing recommendations
Bibliography

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.This document outlines the procedure, by which glass products may be rated, according to their acoustic performance which enables assessment of compliance with the acoustic requirements of buildings.Rigorous technical analysis of measurement data remains an option, but this standard is intended to enable the derivation of simpler indices of performance, which can be adopted with confidence by non-specialists.By adopting the principles of this standard the formulation of acoustic requirements in Building Codes and for product specification to satisfy particular needs for glazing is simplified.It is recognised that the acoustic test procedures contained within EN ISO 140-1 and EN ISO 140-3 relate only to glass panes and their combinations. Although the same principles should be followed as closely as possible, it is inevitable that some compromises are necessary, because of the bulkier construction of other glazing types, e.g. glass blocks, paver units, channel-shaped glass, structural glazing and structural sealant glazing. Guidelines on how to adapt the test procedures for these glazing types are offered in Clause 4.All the considerations of this standard relate to panes of glass/glazing alone. Incorporation of them into windows may cause changes in acoustic performance as a result of other influences, e.g. frame design, frame material, glazing material/method, mounting method, air tightness, etc. Measurements of the sound insulation of complete windows (glass and frame) may be undertaken to resolve such issues.

Committee
CEN/TC 129
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
ONORM EN 12758 : 2011 Identical
SS-EN 12758:2011 Identical
I.S. EN 12758:2011 Identical
NBN EN 12758 : 2011 Identical
PN EN 12758 : 2011 Identical
ÖNORM EN 12758: 2019 11 15 Identical
NS EN 12758 : 2011 Identical
UNI EN 12758 : 2011 Identical
UNE-EN 12758:2011 Identical
BS EN 12758:2011 Identical
SN EN 12758 : 2011 Identical
NF EN 12758 : 2011 Identical
NEN EN 12758 : 2011 Identical
DS EN 12758 : 2011 Identical
DIN EN 12758:2011-04 Identical

DIN EN 15682-2:2013-10 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
14/30313892 DC : 0 BS EN ISO 10140-1 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS
BS ISO 18292:2011 Energy performance of fenestration systems for residential buildings. Calculation procedure
BS EN 15682-2:2013 Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard
08/30087642 DC : 0 ISO 10140-1 - ACOUSTICS LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: TEST CODES
PREN 572-9 : DRAFT 2017 GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
17/30360105 DC : 0 BS EN 1748-1-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD
UNI EN 1279-5 : 2010 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
UNI EN 15682-2 : 2013 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
DIN EN 1096-4:2015-06 (Draft) GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN ISO 12543-3:2011 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 3: LAMINATED GLASS
BS EN ISO 12543-3:2011 Glass in building. Laminated glass and laminated safety glass Laminated glass
BS EN 12337-2:2004 Glass in building. Chemically strengthed soda lime silicate glass Evaluation of conformity/Product standard
BS EN ISO 12543-2:2011 Glass in building. Laminated glass and laminated safety glass Laminated safety glass
DIN EN 13830:2015-07 CURTAIN WALLING - PRODUCT STANDARD
EN 12337-2:2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 50583-2:2016 Photovoltaics in buildings - Part 2: BIPV systems
EN ISO 12543-3:2011 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
EN 13024-2:2004 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
PREN 13830 : DRAFT 2013 CURTAIN WALLING - PRODUCT STANDARD
UNE-EN 15683-2:2014 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
BS EN 15681-2:2017 Glass in Building. Basic alumino silicate glass products Product standard
BS EN 50583-1:2016 Photovoltaics in buildings BIPV modules
BS EN 50583-2:2016 Photovoltaics in buildings BIPV systems
12/30255284 DC : DRAFT APR 2012 BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD
PREN 14178-2 : DRAFT 2017 GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
17/30359844 DC : 0 BS EN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
08/30170594 DC : DRAFT JULY 2008 BS EN ISO 12543-2 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 2: LAMINATED SAFETY GLASS
13/30281348 DC : 0 BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
09/30196724 DC : 0 BS ISO 18292 - ENERGY PERFORMANCE OF FENESTRATION SYSTEMS - CALCULATION PROCEDURE
PREN 1748-1-2 : DRAFT 2017 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD
PREN 12150-2 : DRAFT 2017 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
I.S. EN ISO 10140-1:2016 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO/DIS 10140-1:2014)
PREN 1748-2-2 : DRAFT 2017 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD
BS EN ISO 10140-1 : 2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS
DIN EN 15681-2:2015-07 (Draft) GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
ISO 22897:2003 Glass in building — Glazing and airborne sound insulation — Product descriptions and determination of properties
15/30319715 DC : 0 BS EN 1279-5 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
PREN 14449 : DRAFT 2017 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD
I.S. EN 15682-2:2013 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
DIN EN ISO 12543-3:2011-12 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
DIN EN 12337-2:2005-01 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 12337-2:2004
DIN EN 1748-1-2:2005-01 Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
DIN EN 572-9:2005-01 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
DIN EN 1748-2-2:2005-01 Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
DIN EN 14178-2:2005-01 Glass in Building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
DIN EN 1279-5:2015-08 (Draft) GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
DIN EN 14449:2005-07 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
DIN EN 14321-2 E : 2005 GLASS IN BUILDING - THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNE-EN 13830:2016 Curtain walling - Product standard
I.S. EN 13830:2015 CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 14351-1:2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS
I.S. EN ISO 12543-2:2011 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 2: LAMINATED SAFETY GLASS
DIN EN 1036-2:2008-05 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD
DIN EN 15683-2:2014-02 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNE-EN 15681-2:2017 Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
14/30281866 DC : 0 BS ISO 18178 - GLASS IN BUILDING - LAMINATED SOLAR PV GLASS
BS EN 15683-2:2013 Glass in building. Thermally toughened soda lime silicate channel shaped safety glass Evaluation of conformity. Product standard
UNE-EN 50583-2:2016 Photovoltaics in buildings - Part 2: BIPV systems
12/30266506 DC : 0 BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS
08/30170590 DC : DRAFT JULY 2008 BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
08/30170598 DC : DRAFT JULY 2008 BS EN ISO 12543-3 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 3: LAMINATED GLASS
EN 1279-5:2005+A2:2010 Glass in building - Insulating glass units - Part 5: Evaluation of conformity
UNE-EN ISO 10140-1:2016 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)
NF EN 1279-5 : 2005 + A2 2010 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
PREN 1279-5 : DRAFT 2015 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
I.S. EN 1279-5:2005 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
ISO 18292:2011 Energy performance of fenestration systems for residential buildings Calculation procedure
DIN EN 14179-2:2005-08 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
DIN EN 12150-2:2005-01 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004
DIN EN 1863-2:2005-01 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004
DIN EN ISO 12543-2:2011-12 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
DIN EN 13024-2:2005-01 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 13024-2:2004
DIN EN 14449 E : 2005 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY - PRODUCT STANDARD
BS EN 14178-2:2004 Glass in building. Basic alkaline earth silicate glass products Evaluation of conformity/Product standard
ISO 10140-1:2016 Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products
EN 13830:2015 Curtain walling - Product standard
EN 14449:2005/AC:2005 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
EN 15681-2:2017 Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
UNI EN 14449 : 2005 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
17/30360667 DC : DRAFT SEP 2017 BS EN 1748-2-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD
PREN 50583 : DRAFT 2012 PHOTOVOLTAICS IN BUILDINGS
PREN 14179-2 : DRAFT 2017 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
I.S. EN 15683-2:2013 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 1096-4:2004 Glass in building. Coated glass Evaluation of conformity/Product standard
BS EN 1863-2:2004 Glass in building. Heat strengthened soda lime silicate glass Evaluation of conformity. Product standard
BS EN 572-9:2004 Glass in building. Basic soda lime silicate glass products Evaluation of conformity/Product standard
ISO 12543-2:2011 Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass
ISO 12543-3:2011 Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass
BS EN 14351-1 : 2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS
BS EN 14321-2:2005 Glass in building. Thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard
UNE-EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
BS EN 13830:2015 Curtain walling. Product standard
BS EN 1748-1-2:2004 Glass in building. Special basic products Borosilicate glasses - Evaluation of conformity. Product standard
UNE-EN ISO 12543-3:2011 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
BS EN 14449:2005 Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
EN 14178-2:2004 Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
EN 15683-2:2013 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
EN 14321-2:2005 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 1748-1-2:2004 Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
EN 14351-1:2006+A2:2016 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
EN 1748-2-2:2004 Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard
EN 15682-2:2013 Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 14179-2:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
UNE-EN 15682-2:2014 Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
UNE-EN 50583-1:2016 Photovoltaics in buildings - Part 1: BIPV modules
I.S. EN 15681-2:2017 GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
UNI EN 15683-2 : 2014 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
12/30266553 DC : 0 BS EN 16477-2 - GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY
EN ISO 10140-1:2016 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016)
I.S. EN 1096-4:2004 GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 1279-5 : 2005 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
I.S. EN 50583-1:2016 PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES
I.S. EN 50583-2:2016 PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS
17/30359850 DC : 0 BS EN 14178-2 - GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
BS EN 1036-2:2008 Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard
BS EN 12150-2:2004 Glass in building. Thermally toughened soda lime silicate safety glass Evaluation of conformity/Product standard
BS EN 13024-2:2004 Glass in building. Thermally toughened borosilicate safety glass Evaluation of conformity/Product standard
BS EN 14179-2:2005 Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass Evaluation of conformity/product standard
EN 50583-1:2016 Photovoltaics in buildings - Part 1: BIPV modules
EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
DIN EN 14321-2:2005-10 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
UNI EN ISO 12543-3 : 2011 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 3: LAMINATED GLASS
UNI EN ISO 12543-2 : 2011 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 2: LAMINATED SAFETY GLASS
UNE-EN 1279-5:2006 Glass in building - Insulating glass units - Part 5: Evaluation of conformity
UNE-EN 14351-1:2006 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

EN 572-3:2012 Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
EN 12337-1:2000 Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description
EN 13024-1:2011 Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description
EN 1748-2-1:2004 Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties
EN 14321-1:2005 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description
EN 14179-1:2016 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 572-7:2012 Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
EN 1279-1:2004/AC:2006 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION
EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
ISO 12543-3:2011 Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass
EN 1863-1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
EN 14178-1:2004 Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass
ISO 16940:2008 Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass
EN ISO 12543-3:2011 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
ISO 12543-2:2011 Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass
EN 572-6:2012 Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
EN 572-2:2012 Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
EN 12150-1:2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 1748-1-1:2004 Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties
EN 572-4:2012 Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
ISO 12543-1:2011 Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts
EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
ISO 717-1:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
EN 572-5:2012 Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
EN 1051-1:2003 Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description
EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
ISO 12543-5:2011 Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing
EN ISO 12543-1:2011 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.