BS EN 60076-13:2006
Current
The latest, up-to-date edition.
Power transformers Self-protected liquid-filled transformers
Hardcopy , PDF
English
30-11-2006
1 Scope
2 Normative references
3 Terms and definitions
4 Service conditions
5 Electrical characteristics
5.1 Rated power
5.2 Highest voltage for equipment
5.3 Windings
5.4 Tappings
5.5 Connection group
5.6 Dimensioning of the low-voltage winding neutral
connection
5.7 Short-circuit impedance
5.8 Insulation levels and dielectric tests
5.9 Temperature rise limits at rated power
5.10 Overload capability
6 Self-protection and disconnection device (SPDD)
6.1 Functional requirements
6.2 Coordination principle
6.3 Mechanical requirements
7 Constructional requirements
7.1 Liquid preservation system
7.2 Bushings
7.3 Dielectric liquid and component materials
7.4 Disconnection function
8 Information to be supplied by the customer
9 Information to be supplied by the manufacturer
10 Rating plate
11 Tests
11.1 List and classification of tests (routine, type
and special tests)
11.2 Routine tests
11.3 Type tests
11.4 Short-circuit test with the self-protection and
disconnection device disconnected or bypassed
12 Test procedure
12.1 Measurement of partial discharges
12.2 Transformer pressure test
12.3 Switching cycle tests
12.4 Behaviour test of self-protection and disconnection
device
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Applies to high-voltage/low-voltage self-protected liquid-filled and naturally cooled transformers for rated power 50 kVA to 1000 kVA for indoor or outdoor use having a: - primary winding (high-voltage) with highest voltage for equipment up to 24 kV; - secondary winding (low-voltage) with highest voltage for equipment of 1,1 kV.
Committee |
PEL/14
|
DevelopmentNote |
Supersedes 04/30117440 DC (11/2006)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Applies to high-voltage/low-voltage self-protected liquid-filled and naturally cooled transformers for rated power 50 kVA to 1 000 kVA for indoor or outdoor use having a primary winding (high-voltage) with highest voltage for equipment up to 24 kV; a secondary winding (low-voltage) with highest voltage for equipment of 1,1 kV.
Standards | Relationship |
IEC 60076-13:2006 | Identical |
DIN EN 60076-13 : 2007 | Identical |
I.S. EN 60076-13:2006 | Identical |
NBN EN 60076-13 : 2007 | Identical |
NF EN 60076-13 : 2007 | Identical |
EN 60076-13 : 2006 | Identical |
IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
EN 60076-5:2006 | Power transformers - Part 5: Ability to withstand short-circuit |
EN 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
IEC 60282-1:2009+AMD1:2014 CSV | High-voltage fuses - Part 1: Current-limiting fuses |
IEC 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
EN 60270:2001/A1:2016 | HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015) |
IEC 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
IEC 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
IEC 60076-1:2011 | Power transformers - Part 1: General |
EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
EN 60282-1:2009/A1:2014 | HIGH-VOLTAGE FUSES - PART 1: CURRENT-LIMITING FUSES (IEC 60282-1:2009) |
EN 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.