BS EN 60335-2-69:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
Hardcopy , PDF
30-11-2014
English
31-05-2013
Committee |
CPL/61/10
|
DevelopmentNote |
To be read in conjunction with BS EN 60335-1 Supersedes 01/207511 DC, 89/28858 DC & 94/216804 DC (07/2003) Supersedes 02/208583 DC. (06/2005) Supersedes 07/30161814 DC. (07/2008) Supersedes 08/30195352 DC. (01/2010) Supersedes 10/30216256 DC. (05/2013)
|
DocumentType |
Standard
|
Pages |
80
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments.
It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system.
NOTE 101 Attention is drawn to the fact that additional requirements on the safe installation of centrally-sited vacuum cleaners are not addressed by this standard but need to be taken into account.
NOTE 102 This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope:
public use areas such as hotels, schools, hospitals;
industrial locations, for example factories and manufacturing shops;
retail outlets, for example shops and supermarkets;
business premises, for example offices and banks;
all uses other than normal housekeeping purposes.
They are not equipped with a traction drive. The following power systems are covered:
mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances,
battery powered motors.
This standard also applies to machines handling hazardous dust, such as asbestos.
NOTE 103 Additional requirements for machines handling hazardous dust are given in Annex AA. Attention is drawn to the fact that in many countries additional requirements on hazardous substances might apply.
NOTE 104 Radioactive substances are not covered by definition of hazardous dust for the purposes of this standard.
This European Standard deals with the reasonably foreseeable hazards presented by machines that are encountered by all persons.
However, in general, it does not take into account:
children playing with the machine;
the use of the machine by children;
the use of the machine by vulnerable people or very vulnerable people.
This standard does not apply to
vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2);
floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72);
spray extraction machines for commercial use (IEC 60335-2-68);
hand-held mains-operated electrical garden blowers, vacuums and blower vacuums (IEC 60335-2-100);
hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series);
appliances for medical purposes (IEC 60601-1);
machines designed for use in corrosive environments;
machines designed for picking up liquids with a flash point below 55 °C;
machines designed for use in explosive environments (dust, vapour or gas), except those designed for use in zone 22.
NOTE 103 Additional requirements for machines handling hazardous dust are given in Annex AA. Attention is drawn to the fact that in many countries additional requirements on hazardous substances might apply.
NOTE 104 Radioactive substances are not covered by definition of hazardous dust for the purposes of this standard.
Standards | Relationship |
UNE-EN 60335-2-69:2013 | Identical |
SN EN 60335-2-69 : 2003 | Identical |
DIN EN 60335-2-69 : 2015 | Identical |
I.S. EN 60335-2-69:2012 | Identical |
EN 60335-2-69:2012 | Identical |
NEN EN 60335-2-69 : 1995 | Identical |
NF EN 60335-2-69 : 2005 AMD 2 2008 | Identical |
BS PAS 60-2(2004) : 2004 | EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 2: NEGATIVE PRESSURE UNITS - SPECIFICATION |
09/30189957 DC : 0 | BS 8520-3 - EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 3: OPERATION, CLEANING AND MAINTENANCE OF CLASS H VACUUM CLEANERS - CODE OF PRACTICE |
BS PAS 60-3(2004) : 2004 | EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 3: OPERATION, CLEANING AND MAINTENANCE OF CLASS H VACUUM CLEANERS - CODE OF PRACTICE |
BS 8520-3:2009 | Equipment used in the controlled removal of asbestos-containing materials Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice |
BS 8520-2:2009 | Equipment used in the controlled removal of asbestos-containing materials Negative pressure units. Specification |
09/30189955 DC : 0 | BS 8520-2 - EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 2: NEGATIVE PRESSURE UNITS - SPECIFICATION |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
IEC 60335-2-67:2012+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse |
IEC 60335-2-100:2002 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
IEC 60335-2-72:2016 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES |
ISO 11428:1996 | Ergonomics Visual danger signals General requirements, design and testing |
ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
IEC 60335-2-68:2012+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
ISO 6344-2:1998 | Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220 |
ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.