IEC 60255-22-1:2007
|
Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests |
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
IEC 61158-4-20:2014
|
Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements |
IEC 61158-4-7:2007
|
Industrial communication networks - Fieldbus specifications - Part 4-7: Data-link layer protocol specification - Type 7 elements |
EN 61754-2:1997
|
Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family |
IEC 61169-8:2007
|
Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) |
TIA/EIA 422 : B1994(R2014)
|
ELECTRICAL CHARACTERISTICS OF BALANCED VOLTAGE DIGITAL INTERFACE CIRCUITS |
IEC 61158-4-1:2014
|
Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements |
IEC 60807-3:1990
|
Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction |
IEC 61784-1:2014
|
Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
ISO/IEC 7498-1:1994
|
Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
EN 60754-2:2014
|
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
EN ISO 4892-1:2016
|
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
IEC 60189-1:2007
|
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC 61754-22:2005
|
Fibre optic connector interfaces - Part 22: Type F-SMA connector family |
EN 61131-2:2007
|
Programmable controllers - Part 2: Equipment requirements and tests |
ISO/IEC 8886:1996
|
Information technology Open Systems Interconnection Data link service definition |
IEC 60793-2-30:2015
|
Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres |
EN 61754-22:2005
|
Fibre optic connector interfaces - Part 22: Type F-SMA connector family |
IEC 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
EN 61754-13:2006
|
Fibre optic connector interfaces - Part 13: Type FC-PC connector |
IEC 61596:1995
|
Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions |
IEC 60794-1-2:2017
|
Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
HD 60364-4-41:2017/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
HD 60364-5-54:2011/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
EN 60793-2-40:2016
|
Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
EN 61169-8:2007
|
Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC) |
IEC 60793-2-40:2015
|
Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
IEC 61158-4-12:2014
|
Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
ISO/IEC 8802-3:2000
|
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
IEC 61000-4-4:2012 RLV
|
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EN 61000-4-2:2009
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ISO/IEC 10731:1994
|
Information technology Open Systems Interconnection Basic Reference Model Conventions for the definition of OSI services |
EN 61158-4-3:2014
|
Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements |
IEC 61754-2:1996
|
Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family |
EN 61000-4-3 : 2006 AMD 2 2010
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
EN 60079-11:2012
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEC 61754-13:2006
|
Fibre optic connector interfaces - Part 13: Type FC-PC connector |
EN 60079-25:2010/AC:2013
|
EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 60793-2-30:2015
|
Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres |
IEC 60754-2:2011
|
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
EN 61158-4-2:2014
|
Industrial communication networks - Fieldbus specifications -Part 4-2: Data-link layer protocol specification - Type 2 elements |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
IEC 60079-25:2010
|
Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
IEC 61300-3-4:2012
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
IEC 61156-1:2007+AMD1:2009 CSV
|
Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
ISO/IEC 10022:1996
|
Information technology Open Systems Interconnection Physical Service Definition |
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
IEC 60079-14:2013
|
Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
EN 61158-3-20:2014
|
Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements |
IEC 61158-4-3:2014
|
Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specificationn - Type 3 elements |
EN 60794-1-2:2017/AC:2017-07
|
OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
TIA/EIA 644 : A2001(R2012)
|
ELECTRICAL CHARACTERISTICS OF LOW VOLTAGE DIFFERENTIAL SIGNALING (LVDS) INTERFACE CIRCUITS |
IEC TR 61491:2010
|
Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives |
EN 60079-14:2014/AC:2016
|
EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
EN 60811-404:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
EN 60811-403:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
IEC 60811-404:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
EN 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
IEC 61158-4-18:2010
|
Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements |
IEC 61131-2:2017
|
Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
EN 61000-4-4:2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
IEC 60947-5-2:2007+AMD1:2012 CSV
|
Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
EN 60603-7-4:2010
|
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
TIA 485 : A1998(R2012)
|
ELECTRICAL CHARACTERISTICS OF GENERATORS AND RECEIVERS FOR USE IN BALANCED DIGITAL MULTIPOINT SYSTEMS |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO/IEC 8482:1993
|
Information technology Telecommunications and information exchange between systems Twisted pair multipoint interconnections |
IEC 61158-4-8:2007
|
Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8 elements |
IEC 60875-1:2015
|
Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
IEC 60227-5:2011
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) |
IEC 61158-3-20:2014
|
Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements |
IEC 61784-2:2014
|
Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
IEC 61158-4-16:2007
|
Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements |
IEC 60811-403:2012
|
Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
IEC 60603-7-4:2010
|
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |