BS EN 753-3:1999
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Identification card systems. Intersector thin flexible cards Test methods
Hardcopy , PDF
01-04-2008
English
15-12-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Abbreviations
5 Test Methods for the General Technical Specification
5.1 General
5.2 Dimensions (except thickness)
5.3 Thickness
5.4 Separation Force
5.5 Reel Winding
5.6 Bursting Strength
5.7 Stiffness
5.8 Folding Endurance
5.9 Tensile Strength
5.10 Ash Content
5.11 Hygro-Expansivity
5.12 Smoothness
5.13 Opacity
5.14 Coefficient of Friction
5.15 Reflectance Factor
5.16 Air Permeance
5.17 Sizing and Pen-Writing Factor
5.18 Tear Resistance
5.19 Delamination Resistance
5.20 Cold-Crack Temperature (Brittleness)
5.21 Electrical Conductivity
6 Test Methods for Magnetic Strip Physical Characteristics
6.1 Preparation and Storage of Samples
6.2 Conditioning and Test Environments
6.3 Protrusion
6.4 Profile Deviation
6.5 Roughness Ra and Rz
6.6 Wrapage
6.7 Adherence
6.8 Wear Test
6.9 Dimensional Measurement of the Magnetic Stripe
7 Test Methods for Static Magnetic Characteristics
7.1 Principle
7.2 Apparatus
7.3 Preparation and Storage of Samples
7.4 Procedure
7.5 Expression of Results
7.6 Coercivity, HcM
7.7 Squareness, SQ
7.8 Switching Field Distribution, (SFD)
7.9 Test Report
8 Test Method for Dynamic Magnetic Characteristics
8.1 Principle
8.2 Reference Cards
8.3 Apparatus
8.4 Preparation and Preservation of Test Samples
8.5 Procedures
8.6 Expression of Results
8.7 Test Report
Annex A (informative) Dye Solutions
Bibliography
Deals with procedures and methods for measuring TFC features as defined in EN 753-1:1997 and EN 753-2:1997. Many procedures for checking physical properties of base materials are to be applied to samples cut from large sheets or continuous material. All criteria of EN 753 apply to finished cards, unless otherwise stated. Test procedures outlined should be carried out on separate samples. Acceptance criteria are not covered; this subject is described in a CEN Technical Report.
| Committee |
IST/17
|
| DevelopmentNote |
Supersedes 99/648206 DC (09/2005)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| SNV BS EN 753-3 : 1999 | Identical |
| NF EN 753-3 : 1999 | Identical |
| NBN EN 753-3 : 1ED 99 | Identical |
| NS EN 753-3 : 1ED 1999 | Identical |
| NEN EN 753-3 : 1999 | Identical |
| I.S. EN 753-3:1999 | Identical |
| EN 753-3 : 1999 | Identical |
| DIN EN 753-3:2000-03 | Identical |
| UNI EN 753-3 : 1999 | Identical |
| EN 20534 : 1993 | PAPER AND BOARD - DETERMINATION OF THICKNESS AND APPARENT BULK DENSITY OR APPARENT SHEET DENSITY |
| ISO 5651:1989 | Paper, board and pulps Units for expressing properties |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO 4094:2005 | Paper, board and pulps International calibration of testing apparatus Nomination and acceptance of standardizing and authorized laboratories |
| ISO 5629:1983 | Paper and board Determination of bending stiffness Resonance method |
| ISO 5626:1993 | Paper Determination of folding endurance |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| ISO/IEC 7811-6:2014 | Identification cards Recording technique Part 6: Magnetic stripe High coercivity |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 31-11:1992 | Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology |
| ISO 8570:1991 | Plastics Film and sheeting - Determination of cold-crack temperature |
| NFQ 03 015 : 2009 | TESTING OF PAPER AND BOARD - DETERMINATION OF PEN WRITING SIZING GRADE |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| ISO 5627:1995 | Paper and board — Determination of smoothness (Bekk method) |
| EN 25651 : 1993 | PAPER, BOARD AND PULPS - UNITS FOR EXPRESSING PROPERTIES |
| EN 753-2 : 1997 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - MAGNETIC RECORDING TECHNIQUE |
| ISO 2144:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 900 degrees C |
| ISO 284:2012 | Conveyor belts — Electrical conductivity — Specification and test method |
| EN 753-1 : 1997 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - GENERAL TECHNICAL SPECIFICATIONS |
| EN 20284 : 1993 | CONVEYOR BELTS - ELECTRICAL CONDUCTIVITY - SPECIFICATION AND METHOD OF TEST |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 8226-2:1990 | Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 % |
| NFQ 03 046 : 2016 | PAPERS AND BOARD - RESISTANCE DETERMINATION TO PERPENDICULAR CLEAVAGE IN THE LEAF PLAN - BURST METHOD |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| ISO 1831:1980 | Printing specifications for optical character recognition |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| EN 20187:1993 | Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
| ISO 31-2:1992 | Quantities and units Part 2: Periodic and related phenomena |
| EN ISO/IEC 10373 : 1995 | IDENTIFICATION CARDS - TEST METHODS |
| ISO/IEC 7811-2:2014 | Identification cards Recording technique Part 2: Magnetic stripe Low coercivity |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 31-10:1992 | Quantities and units Part 10: Nuclear reactions and ionizing radiations |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 8295:1995 | Plastics Film and sheeting Determination of the coefficients of friction |
| ISO 6383-2:1983 | Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
| ISO 31-12:1992 | Quantities and units Part 12: Characteristic numbers |
| ISO 4593:1993 | Plastics Film and sheeting Determination of thickness by mechanical scanning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.