BS EN ISO 10434:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
Hardcopy , PDF
23-09-2020
English
30-07-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Pressure/temperature ratings
5 Design
6 Materials
7 Testing, inspection and examination
8 Marking
9 Preparation for dispatch
Annex A (informative) Information to be specified by
the purchaser
Annex B (informative) Identification of valve terms
Bibliography
Defines the requirements for heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would indicate a need for full port openings, heavy wall sections and large stem diameters.
| Committee |
PSE/18/2
|
| DevelopmentNote |
Supersedes BS 1414(1975) and 02/711048 DC (08/2004)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 10434 : 2005 | Identical |
| NEN EN ISO 10434 : 2004 | Identical |
| ISO 10434:2004 | Identical |
| NBN EN ISO 10434 : 2004 | Identical |
| DIN EN ISO 10434:2005-01 | Identical |
| I.S. EN ISO 10434:2004 | Identical |
| SN EN ISO 10434 : 2004 | Identical |
| NF EN ISO 10434 : 2004 | Identical |
| UNI EN ISO 10434 : 2004 | Identical |
| NS EN ISO 10434 : 1ED 2004 | Identical |
| EN ISO 10434:2004 | Identical |
| UNE-EN ISO 10434:2005 | Identical |
| ASME B1.12 : 1987 | CLASS 5 INTERFERENCE-FIT THREAD |
| ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| ASME B36.10 : 1979 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ISO 5209:1977 | General purpose industrial valves Marking |
| ISO 6002:1992 | Bolted bonnet steel gate valves |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 5752:1982 | Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| MSS SP 102 : 1989 | MULTI-TURN VALVE ACTUATOR ATTACHMENT - FLANGE AND DRIVING COMPONENT DIMENSIONS AND PERFORMANCE CHARACTERISTICS |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| NFM 87 412 : 1986 | INDUSTRIE DU PETROLE - ROBINETTERIE EN ACIER FORGE - SPECIFICATIONS |
| ASME B16.25 : 2012 | BUTTWELDING ENDS |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.