BS EN ISO 1523:2002
Current
The latest, up-to-date edition.
Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
Hardcopy , PDF
English
12-06-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Term and definition
4 Principle
5 Chemicals and materials
6 Apparatus
7 Apparatus preparation
8 Sampling
9 Sample handling
10 Procedure
11 Calculation
12 Expression of result
13 Precision
14 Test report
Annex A (informative) - Verification of apparatus
Bibliography
Identical with IP 492/2003.
| Committee |
PTI/13
|
| DevelopmentNote |
Also numbered as BS 2000-492(2002) Supersedes 97/122582 DC To be read in conjunction with ISO 3679 (05/2002) Reviewed and confirmed by BSI, August, 2004. (11/2004)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies a method to determine the flash point of paints, varnishes, paint binders, solvents, petroleum or related products.
This International Standard is not applicable to water-borne paints which may, however, be tested using ISO3679 ([5] in the bibliography).
The method is suitable for use over the temperature range – 30°C to 110°C, depending on the use of different apparatus listed in Table1.
The interpretation of results obtained from solvent mixtures containing halogenated hydrocarbons should be considered with caution, as these mixtures can give anomalous results.
| Standards | Relationship |
| I.S. EN ISO 1523:2002 | Identical |
| NEN EN ISO 1523 : 2002 | Identical |
| NS EN ISO 1523 : 1ED 2002 | Identical |
| UNI EN ISO 1523 : 2005 | Identical |
| UNE-EN ISO 1523:2003 | Identical |
| EN ISO 1523:2002 | Identical |
| NBN EN ISO 1523 : 2002 | Identical |
| SN EN ISO 1523 : 2002 | Identical |
| ISO 1523:2002 | Identical |
| NF EN ISO 1523 : 2002 | Identical |
| PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| EN 22719 : 1993 | PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.