ASTM D 6362 : 1998 : R2003
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
FD ISO GUIDE 34 : 2010 FD
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
ASTM E 2296 : 2003
|
Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
DIN EN ISO/IEC 17043 E : 2010
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
PD 6532-5:1997
|
Reference materials. Guide to the contents of certificates of reference materials Quality system guidelines for the production of reference materials |
02/101929 DC : DRAFT FEB 2002
|
PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
BS EN ISO/IEC 17043:2010
|
Conformity assessment. General requirements for proficiency testing |
BS ISO 16042:2007
|
Iron ores. Guidelines for the use of certified reference materials (CRMs) |
OIML D 18 : 2008
|
THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES |
BS ISO 17992:2013
|
Iron ores. Determination of arsenic content. Hydride generation atomic absorption spectrometric method |
BS ISO 14606:2015
|
Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials |
11/30214536 DC : 0
|
BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
BIS IS 15393-6 : 2003(R2009)
|
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
OIML G 1-100 : 2008
|
EVALUATION OF MEASUREMENT DATA - GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
03/300854 DC : DRAFT JAN 2003
|
ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
15/30327269 DC : 0
|
BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
13/30213813 DC : 0
|
BS EN ISO 16140-1 - MICROBIOLOGY OF FOOD AND ANIMAL FEED - METHOD VALIDATION - PART 1: VOCABULARY |
NF EN ISO 15351 : 2010
|
STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
05/30116635 DC : DRAFT APR 2005
|
BS ISO 12739 - ZINC SULFIDE CONCENTRATES - DETERMINATION OF ZINC CONTENT - IONEXCHANGE/EDTA TITRIMETRIC METHOD |
BS ISO 5725-4:1994
|
Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of the trueness of a standard measurement method |
08/30182372 DC : DRAFT JULY 2008
|
BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
BS ISO 4689-3:2017
|
Iron ores. Determination of sulfur content Combustion/infrared method |
BS EN ISO 16664:2017
|
Gas analysis. Handling of calibration gases and gas mixtures. Guidelines |
BS ISO 16664 : 2004
|
GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES |
ISO Guide 31:2015
|
Reference materials — Contents of certificates, labels and accompanying documentation |
03/300855 DC : DRAFT JAN 2003
|
ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS EN 10315:2006
|
Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique |
ASTM D 6596 : 2000 : R2005
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
BS ISO 13528:2015
|
Statistical methods for use in proficiency testing by interlaboratory comparison |
CSA ISO/TR 10017 : 2003 : R2013
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
ASTM D 6362 : 1998 : R2013
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
PREN 3976 : 200P1
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
ISO 13658:2000
|
Zinc sulfide concentrates Determination of zinc content Hydroxide precipitation and EDTA titrimetric method |
PREN ISO 13736 : DRAFT 2011
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
I.S. EN 16339:2013
|
AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING |
CEI UNI 70099 : 2010
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
BS ISO 2597-2:2015
|
Iron ores. Determination of total iron content Titrimetric methods after titanium(III) chloride reduction |
ISO/TS 10798:2011
|
Nanotechnologies — Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis |
UNE-EN ISO/IEC 17043:2010
|
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
CEI UNI EN ISO/IEC 17025 : 2008
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
ASTM E 2972 : 2015
|
Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
BS ISO 10204:2017
|
Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method |
I.S. EN ISO 15194:2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
ASTM D 8175 : 2018
|
Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester |
ASTM C 1128 : 2018 : REDLINE
|
Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
DIN EN ISO 6974-2 E : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
DIN EN ISO 10993-12 E : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
ISO 6974-1:2012
|
Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
BS EN 12697-38:2004
|
Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
BS EN ISO 10993-12:2012
|
Biological evaluation of medical devices Sample preparation and reference materials |
ISO/IEC 17043:2010
|
Conformity assessment — General requirements for proficiency testing |
UNE-EN ISO 13736:2013
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
BS EN ISO 14111:1999
|
Natural gas. Guidelines to traceability in analysis |
ISO 17511:2003
|
In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
EN ISO 12179:2000/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
DIN EN ISO 148-3:2017-04
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
EN ISO 148-3:2016
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
UNI EN ISO 10993-12 : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
ASTM E 1724 : 1995
|
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
ISO 10258:2018
|
Copper sulfide concentrates — Determination of copper content — Titrimetric methods |
BS EN ISO 2592:2017
|
Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
10/30215322 DC : 0
|
BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
ISO 13545:2000
|
Lead sulfide contentrates Determination of lead content EDTA titration method after acid digestion |
BS ISO 16878:2016
|
Iron ores. Determination of metallic iron content. Iron(III) chloride titrimetric method |
ISO/TR 79:2015
|
Reference materials - Examples of reference materials for qualitative properties |
ISO 13313:2017
|
Iron ores Determination of sodium Flame atomic absorption spectrometric method |
06/30112308 DC : 0
|
EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS |
ASTM D 6596:2000
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
12/30237514 DC : 0
|
BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
ASTM E 2294 : 2003
|
Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry |
ISO 16878:2016
|
Iron ores Determination of metallic iron content Iron(III) chloride titrimetric method |
09/30179503 DC : DRAFT FEB 2009
|
BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS GIVING A PERIODIC DIFFRACTION PATTERN |
UNI EN 15842 : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
10/30203803 DC : 0
|
BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
OIML V 2-200 : 2012
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
BS ISO 15247:2015
|
Zinc sulfide concentrates. Determination of silver content. Acid dissolution and flame atomic absorption spectrometric method |
BS ISO 13312:2017
|
Iron ores. Determination of potassium. Flame atomic absorption spectrometric method |
ASTM E 826 : 2014 : REDLINE
|
Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry |
BS 2000-524(2004) : 2004
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
UNI CEN/TR 10317 : 2009
|
EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION |
14/30231508 DC : 0
|
BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY |
UNI ISO/TS 21749 : 2009
|
MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
ISO Guide 32:1997
|
Calibration in analytical chemistry and use of certified reference materials |
I.S. EN 10315:2006
|
ROUTINE METHOD FOR ANALYSIS OF HIGH ALLOY STEEL BY X-RAY FLUORESCENCE SPECTROMETRY (XRF) BY USING A NEAR BY TECHNIQUE |
DIN ISO 5725-2:2002-12
|
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
ISO 10378:2016
|
Copper, lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption spectrometric method |
DIN EN 15842:2010-06
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
08/30190548 DC : DRAFT DEC 2008
|
BS EN ISO 17054 - ROUTINE METHOD FOR ANALYSIS OF HIGH ALLOY STEEL BY X-RAY FLUORESCENCE SPECTROMETRY (XRF) BY USING A NEAR BY TECHNIQUE |
EN ISO 17511:2003
|
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
DIN EN ISO 15351:2010-08
|
Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
BS 2000-170(1998) : 1998
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
BS 2000-450(2000) : 2000
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - TEST METHOD |
BS ISO 16700:2004
|
Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification |
07/30157023 DC : 0
|
BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
I.S. EN ISO 17511:2003
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN BIOLOGICAL SAMPLES - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
DIN EN ISO 16664:2016-07 (Draft)
|
GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017) |
ASTM D 6596 : 2000 : R2016
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
ISO 12739:2006
|
Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method |
BS EN ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories |
I.S. EN ISO 16140-1:2016
|
MICROBIOLOGY OF THE FOOD CHAIN - METHOD VALIDATION - PART 1: VOCABULARY (ISO 16140-1:2016) |
UNE-ISO/IEC GUIA 98-3:2012 IN
|
Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
UNE-EN ISO 16140-1:2016
|
Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
NF EN 15842 : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
ASTM D 6362 : 1998 : R2008
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
NF ISO 16700 : 2006
|
MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
I.S. EN ISO 148-3:2016
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
ASTM E 2295 : 2013 : REDLINE
|
Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels |
ASTM E 2294 : 2003 : R2008 : EDT 1
|
Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry |
BS 2000-34(2016) : 2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
EN ISO 2592:2017
|
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
ISO 15194:2009
|
In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
UNI EN ISO 13736 : 2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
ISO 15633:2017
|
Iron ores — Determination of nickel — Flame atomic absorption spectrometric method |
DIN EN 12697-38:2004-10
|
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
DIN EN ISO 10993-12:2012-10
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
DIN EN ISO 6974-1:2012-11
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
DIN EN ISO 6974-2:2012-11
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
BS EN ISO 12677:2011
|
Chemical analysis of refractory products by X-ray fluorescence (XRF) Fused cast-bead method |
I.S. EN ISO 6974-1:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
I.S. EN ISO 10723:2012
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
I.S. EN ISO 13736:2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
I.S. EN ISO 6974-2:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
DIN EN ISO 10723:2013-04
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
I.S. EN ISO 10993-8:2000
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
NF EN ISO 17511 : 2004
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN BIOLOGICAL SAMPLES - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
I.S. EN ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
I.S. EN ISO 2719:2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
I.S. EN ISO 3679:2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
UNI ISO/TR 18532 : 2010
|
Guide to the application of statistical methods for quality and standardization in the industrial sector |
PD 6532-3:2000
|
Reference materials. Guide to the contents of certificates of reference materials Guide to the uses of certified reference materials |
PD 6532-5:2000
|
Reference materials. Guide to the contents of certificates of reference materials General requirements for the competence of reference material producers |
17/30346182 DC : 0
|
BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES |
ECA ILAC P14 : 2013
|
ILAC POLICY FOR UNCERTAINTY IN CALIBRATION |
I.S. CWA 15261-2:2005
|
MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING |
EN ISO 13736:2013
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
PD ISO Guide 34:2009
|
General requirements for the competence of reference material producers |
I.S. EN ISO 3680:2004
|
DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
PD ISO/TR 9686:2017
|
Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement |
UNE-EN ISO 17034:2017
|
General requirements for the competence of reference material producers (ISO 17034:2016) |
14/30301974 DC : 0
|
BS ISO 10203 - IRON ORES - DETERMINATION OF CALCIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
BS ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
BS ISO 15634:2015
|
Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method |
BS ISO 13547-1:2014
|
Copper, lead, zinc and nickel sulfide concentrates. Determination of arsenic Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method |
ASTM E 1724 : 1995 : R2001
|
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
ISO/TS 14167:2003
|
Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
DIN EN 16339:2013-11
|
Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
BS EN ISO 16140-1:2016
|
Microbiology of the food chain. Method validation Vocabulary |
ISO/TR 9686:2017
|
Direct reduced iron Determination of carbon and/or sulfur High-frequency combustion method with infrared measurement |
DIN EN 15842 E : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
PD ISO/TR 79:2015
|
Reference materials. Examples of reference materials for qualitative properties |
14/30281211 DC : 0
|
BS ISO 11536 - IRON ORES - DETERMINATION OF LOSS ON IGNITION - GRAVIMETRIC METHOD |
03/317065 DC : DRAFT NOV 2003
|
ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
BS ISO 5725-3:1994
|
Accuracy (trueness and precision) of measurement methods and results Intermediate measures of the precision of a standard measurement method |
BS ISO 22682:2017
|
Iron ores. Determination of trace elements. Plasma spectrometric method |
BS EN 15842:2010
|
Foodstuffs. Detection of food allergens. General considerations and validation of methods |
BS 3156-11.0.3(1997) : 1997 AMD 10655
|
ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
BS ISO 5725-1:1994
|
Accuracy (trueness and precision) of measurement methods and results General principles and definitions |
BS 2000-523(2015) : 2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS ISO 20998-2:2013
|
Measurement and characterization of particles by acoustic methods Guidelines for linear theory |
15/30301302 DC : 0
|
BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
UNE-ISO/IEC GUIA 99:2012 IN
|
International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
16/30328237 DC : 0
|
BS ISO 22682 - IRON ORES - DETERMINATION OF TRACE ELEMENTS - PLASMA SPECTROMETRIC METHOD |
BS EN ISO 15351:2010
|
Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
PD ISO/TS 14411-1:2017
|
Preparation of particulate reference materials Polydisperse material based on picket fence of monodisperse spherical particles |
PD CEN/TR 10317:2014
|
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
BIS IS/ISO/IEC 17025 : 2005 AMD 1
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
14/30296672 DC : 0
|
BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
ISO/IEC Guide 99:2007
|
International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
BS ISO 12739:2006
|
Zinc sulfide concentrates. Determination of zinc. Ion-exchange/EDTA titrimetric method |
ISO Guide 80:2014
|
Guidance for the in-house preparation of quality control materials (QCMs) |
ASTM E 2296 : 2003 : R2008 : EDT 1
|
Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
ISO 13291:2006
|
Zinc sulfide concentrates Determination of zinc Solvent extraction and EDTA titrimetric method |
PD 6461-3:1995
|
General metrology Guide to the expression of uncertainty in measurement (GUM) |
S.R. CEN/TR 10317:2014
|
EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
ISO/TR 18336:2016
|
Guidelines for good XRF laboratory practice for the iron ore industry |
ISO/TS 20460:2015
|
Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
ISO/TS 14411-1:2017
|
Preparation of particulate reference materials — Part 1: Polydisperse material based on picket fence of monodisperse spherical particles |
UNE-EN 16339:2014
|
Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
ISO Guide 30:2015
|
Reference materials Selected terms and definitions |
UNI EN ISO 15351 : 2010
|
STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
ASTM D 7911 : 2014
|
Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
UNI CEI EN ISO/IEC 17043 : 2010
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
ISO Guide 34:2009
|
General requirements for the competence of reference material producers |
ISO/TR 18532:2009
|
Guidance on the application of statistical methods to quality and to industrial standardization |
ISO 17992:2013
|
Iron ores — Determination of arsenic content — Hydride generation atomic absorption spectrometric method |
ISO 4689-3:2017
|
Iron ores Determination of sulfur content Part 3: Combustion/infrared method |
ISO 10204:2017
|
Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method |
DIN EN ISO 3679:2015-06
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
ISO 1523:2002
|
Determination of flash point — Closed cup equilibrium method |
UNE-EN ISO 6974-2:2013
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
UNE-EN ISO 6974-1:2013
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
BS EN ISO 3680:2004
|
Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
UNE-EN ISO 12677:2012
|
Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011) |
EN ISO 6974-2:2012
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
EN ISO 16140-1:2016
|
Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
UNI EN ISO 12677 : 2011
|
CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS BY X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD |
UNI EN ISO 6974-2 : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
EN ISO 15351:2010
|
Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
UNI EN ISO 6974-1 : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
UNI EN ISO 10723 : 2013
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
UNE-EN ISO 148-3:2017
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
DIN EN ISO 148-3:2015-09 (Draft)
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
UNE-EN ISO 14189:2017
|
Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013) |
ASTM D 93 : 2016-07
|
TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
BS EN ISO 15194:2009
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
BS EN 16339:2013
|
Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
I.S. EN ISO/IEC 17043:2010
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
PD ISO/TR 16476:2016
|
Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials |
12/30271500 DC : 0
|
BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
06/30138176 DC : 0
|
EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
17/30345272 DC : 0
|
BS ISO 14167 - GAS ANALYSIS - GENERAL QUALITY ASPECTS AND METROLOGICAL TRACEABILITY OF CALIBRATION GAS MIXTURES |
DD ISO/TS 10798 : DRAFT JULY 2011
|
NANOTECHNOLOGIES - CHARACTERIZATION OF SINGLEWALL CARBON NANOTUBES USING SCANNING ELECTRON MICROSCOPY AND ENERGY DISPERSIVE X-RAY SPECTROMETRY ANALYSIS |
DIN EN ISO 15194:2009-10
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
BS EN ISO 148-3:2016
|
Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
13/30294275 DC : 0
|
BS ISO GUIDE 30 - REFERENCE MATERIALS - SELECTED TERMS AND DEFINITIONS |
ISO/TR 16476:2016
|
Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials |
BS ISO 11536:2015
|
Iron ores. Determination of loss on ignition. Gravimetric method |
CEN/TR 10317:2014
|
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
09/30210426 DC : 0
|
BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
14/30316056 DC : 0
|
BS ISO/GUIDE 31 - REFERENCE MATERIALS - CONTENTS OF CERTIFICATES, LABELS AND ACCOMPANYING DOCUMENTATION |
PD 6532-3:1992
|
Reference materials. Guide to the contents of certificates of reference materials Guide to the uses of certified reference materials |
15/30317578 DC : 0
|
BS ISO 16700 - MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
PD ISO GUIDE 30:2015
|
Reference materials. Selected terms and definitions |
16/30325304 DC : 0
|
BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
BS ISO 5725-6:1994
|
Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values |
ISO 16700:2016
|
Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
BS 2000-34(2002) : 2002 AMD 15248
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
PREN 45001 : DRAFT 1997
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
BS ISO 20998-3:2017
|
Measurement and characterization of particles by acoustic methods Guidelines for non-linear theory |
ASTM D 6808 : 2002 : R2012
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
I.S. EN ISO 17034:2016
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
14/30272865 DC : 0
|
BS ISO 13547-1 - COPPER, LEAD, ZINC AND NICKEL SULFIDE CONCENTRATES - DETERMINATION OF ARSENIC - PART 1: IRON HYDROXIDE CONCENTRATION AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
05/30116640 DC : DRAFT APR 2005
|
BS ISO 13291 - ZINC SULFIDE CONCENTRATES - DETERMINATION OF ZINC CONTENT - SOLVENT EXTRACTION AND EDTA TITRIMETRIC METHOD |
BS ISO 17315:2014
|
Petroleum products and other liquids. Ethanol. Determination of total acidity by potentiometric titration |
13/30285144 DC : 0
|
BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS ISO 12156-1:1997
|
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
05/30116637 DC : DRAFT APR 2005
|
BS ISO 10469 - COPPER SULFIDE CONCENTRATES - DETERMINATION OF COPPER CONTENT - ELECTROGRAVIMETRIC METHOD |
BS ISO 10378:2016
|
Copper, lead and zinc sulfide concentrates. Determination of gold and silver. Fire assay gravimetric and flame atomic absorption spectrometric method |
PD ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
BS 2000-170(2013) : 2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
BS 2000-36(2002) : 2002
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
UNI CEI 70099 : 2008
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
UNI EN 3976 : 2008
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
I.S. EN ISO 15351:2010
|
STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
NF EN ISO 15194 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
CEI UNI EN ISO 17034 : 1ED 2018
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
ISO 22682:2017
|
Iron ores — Determination of trace elements — Plasma spectrometric method |
ISO 29301:2017
|
Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures |
IWA 13:2014
|
Multiple resource evaluation guideline |
I.S. EN ISO 2592:2017
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
BS ISO 17034 : 2016
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
ISO/TS 21749:2005
|
Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
S.R. ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
ISO 2597-2:2015
|
Iron ores Determination of total iron content Part 2: Titrimetric methods after titanium(III) chloride reduction |
ASTM E 2296 : 2003 : R2013
|
Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
ASTM D 6362 : 1998
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
ASTM D 6808 : 2002
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
ASTM D 6596 : 2000 : R2011
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
ASTM D 7345 : 2017 : REDLINE
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) |
ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories |
ISO 11536:2015
|
Iron ores Determination of loss on ignition Gravimetric method |
ISO 13547-1:2014
|
Copper, lead, zinc and nickel sulfide concentrates Determination of arsenic Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method |
ISO 14595:2014
|
Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs) |
ISO 5725-6:1994
|
Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
I.S. EN 15842:2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
ISO/TS 16195:2013
|
Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form |
DIN EN ISO 17511:2003-11
|
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
ISO 10203:2017
|
Iron ores Determination of calcium Flame atomic absorption spectrometric method |
ISO 16042:2007
|
Iron ores Guidelines for the use of certified reference materials (CRMs) |
ISO/TR 18230:2015
|
Iron ores Determination of loss on ignition Non-oxidised ores |
DIN EN ISO 13736:2013-08
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
DIN EN ISO 12677:2013-02
|
Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011) |
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
BS EN ISO 13736:2008
|
Determination of flash point. Abel closed-cup method |
ISO 14111:1997
|
Natural gas — Guidelines to traceability in analysis |
BS EN ISO 6974-2:2012
|
Natural gas. Determination of composition and associated uncertainty by gas chromatography Uncertainty calculations |
BS EN ISO 2719:2002
|
Determination of flash point. Pensky-Martens closed cup method |
BS EN ISO 3679:2015
|
Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
UNE-EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
BS EN ISO 17511:2003
|
In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
UNE-EN ISO 10993-12:2013
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
ISO 10993-12:2012
|
Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
UNE-EN ISO 10723:2013
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
ISO 12677:2011
|
Chemical analysis of refractory products by X-ray fluorescence (XRF) Fused cast-bead method |
ISO 10723:2012
|
Natural gas Performance evaluation for analytical systems |
ISO 15351:1999
|
Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
ISO 6974-2:2012
|
Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
ISO 14189:2013
|
Water quality — Enumeration of Clostridium perfringens — Method using membrane filtration |
UNE-EN ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
BS EN ISO 6974-1:2012
|
Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
ISO 3680:2004
|
Determination of flash/no flash Rapid equilibrium closed cup method |
BS EN ISO 10723:2012
|
Natural gas. Performance evaluation for analytical systems |
ISO 13736:2013
|
Determination of flash point Abel closed-cup method |
UNE-EN ISO 2719:2017
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 17034:2016
|
General requirements for the competence of reference material producers |
ISO 16140-1:2016
|
Microbiology of the food chain Method validation Part 1: Vocabulary |
ISO 12179:2000
|
Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
ISO 2719:2016
|
Determination of flash point Pensky-Martens closed cup method |
DIN EN ISO/IEC 17043:2010-05
|
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
EN ISO 12677:2011
|
Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011) |
I.S. EN ISO 12179:2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
EN ISO 14111:1999
|
Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
EN ISO 10723:2012
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
EN ISO 17034:2016
|
General requirements for the competence of reference material producers (ISO 17034:2016) |
EN ISO/IEC 17043:2010
|
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
EN ISO 10993-8 : 2000
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
EN 15842:2010
|
Foodstuffs - Detection of food allergens - General considerations and validation of methods |
EN 3976:2006
|
Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
EN ISO 6974-1:2012/AC:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012/COR 1:2012) |
EN ISO 15194:2009
|
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
EN 16339:2013
|
Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
EN ISO 3680:2004
|
Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
EN ISO 1523:2002
|
Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
EN ISO 16664:2017
|
Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017) |
EN ISO 14189:2016
|
Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013) |
04/30105010 DC : DRAFT JUL 2004
|
ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
BS ISO 13291:2006
|
Zinc sulfide concentrates. Determination of zinc. Solvent extraction and EDTA titrimetric method |
BS EN ISO 17034:2016
|
General requirements for the competence of reference material producers |
PD ISO/TR 18230:2015
|
Iron ores. Determination of loss on ignition. Non-oxidised ores |
14/30301977 DC : 0
|
BS ISO 10204 - IRON ORES - DETERMINATION OF MAGNESIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
16/30336081 DC : 0
|
BS EN ISO 16664 - GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES |
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
PD ISO/TS 20460:2015
|
Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
BS ISO 14595:2014
|
Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs) |
16/30320652 DC : 0
|
BS ISO 20998-3 - MEASUREMENT AND CHARACTERIZATION OF PARTICLES BY ACOUSTIC METHODS - PART 3: GUIDELINES FOR NON-LINEAR THEORY |
ISO 4689-2:2017
|
Iron ores Determination of sulfur content Part 2: Combustion/titration method |
12/30242232 DC : 0
|
BS ISO 20998-2 - MEASUREMENT AND CHARACTERIZATION OF PARTICLES BY ACOUSTIC METHODS - PART 2: GUIDELINES FOR LINEAR THEORY |
BS 2000-523(2004) : 2004
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
ISO/IEC Guide 98:1993
|
Guide to the expression of uncertainty in measurement (GUM) |
BS ISO 29301:2017
|
Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures |
ISO 14606:2015
|
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials |
ISO 13312:2017
|
Iron ores Determination of potassium Flame atomic absorption spectrometric method |
UNI EN 16339 : 2013
|
AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING |
DD ISO/TS 21749:2005
|
Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments |
OIML R 146-1 : 2016
|
PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
CEI UNI EN ISO/IEC 17043 : 2011
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
BS ISO 10203:2017
|
Iron ores. Determination of calcium. Flame atomic absorption spectrometric method |
BS ISO 13313:2017
|
Iron ores. Determination of sodium. Flame atomic absorption spectrometric method |
PD ISO GUIDE 33:2015
|
Reference materials. Good practice in using reference materials |
BS ISO 14189 : 2013
|
WATER QUALITY - ENUMERATION OF CLOSTRIDIUM PERFRINGENS - METHOD USING MEMBRANE FILTRATION |
PD ISO/TR 18336:2016
|
Guidelines for good XRF laboratory practice for the iron ore industry |
CSA ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
ASTM D 8174 : 2018
|
Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester |
EN ISO 10993-12:2012
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
97/402277 DC : DRAFT APR 1997
|
PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
00/565675 DC : DRAFT DEC 2000
|
BS EN ISO 17511 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
PD ISO GUIDE 31:2015
|
Reference materials. Contents of certificates, labels and accompanying documentation |
UNI EN ISO 15194 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
BS ISO 4689-2:2017
|
Iron ores. Determination of sulfur content Combustion/titration method |
ISO/IEC Guide 98-3:2008
|
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
ISO Guide 33:2015
|
Reference materials Good practice in using reference materials |
ANSI/AAMI/ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
ISO 13528:2015
|
Statistical methods for use in proficiency testing by interlaboratory comparison |
ISO 20998-2:2013
|
Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory |
ISO 15634:2015
|
Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method |
PREN 17155 : DRAFT 2017
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
17/30360226 DC : 0
|
BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
BS ISO 15633:2017
|
Iron ores. Determination of nickel. Flame atomic absorption spectrometric method |
ASTM D 6808 : 2002 : R2007
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
ASTM E 2294 : 2003 : R2013
|
Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry |
ISO 17315:2014
|
Petroleum products and other liquids — Ethanol — Determination of total acidity by potentiometric titration |
ISO 15247:2015
|
Zinc sulfide concentrates Determination of silver content Acid dissolution and flame atomic absorption spectrometric method |
ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
I.S. EN ISO 16664:2017
|
GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017) |
DIN EN ISO 6974-1 E : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
BS EN ISO 1523:2002
|
Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
ISO/TS 13530:2009
|
Water quality — Guidance on analytical quality control for chemical and physicochemical water analysis |
ISO 148-3:2016
|
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
BS EN 3976:2006
|
Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content |
BS EN ISO 12179:2001
|
Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
ISO 16664:2017
|
Gas analysis — Handling of calibration gases and gas mixtures — Guidelines |
DIN EN ISO 3680:2004-07
|
DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
EN 10315:2006
|
Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique |
EN 12697-38:2004
|
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |